Atomic G04865W Bedienungsanleitung

1-888-996-2729

FAX: 1-866-873-3531

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However,

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Your Model Number G04865W

have your model number when inquiring about parts.

[email protected]

Please

Date Code 2 - G04865W - - HL

When contacting Escalade Sports please provide your model number, date

code (if applicable) and part number if requesting a replacement part. These

numbers are located on the product, packaging, and this owners manual.

Purchase Date

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

Make sure you understand the following tips before you begin to assemble your hockey table.

1. Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please

read and understand the text before starting each assembly step.

FOUR ADULTS ARE REQUIRED TO ASSEMBLE

THIS TOP SHELF 90” AIR HOCKEY TABLE

Assembly Tips

Tools Required:

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS HOCKEY TABLE

TOGETHER.

T1 - Allen Wrench (Included)

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSEMBLY.

Phillips Screwdriver

Furniture Polish and Cloth

H1 = 28 pcs H2 = 32 pcs

8.5 mm x 22 mm

8 mm x 35 mm

Allen Head Bolt Flat Washer

3.5 mm x 12 mm

Phillips Round

Head Screw

H5 = 8 pcs

3.5 mm x 18 mm

Phillips Round

Head Screw

H7 = 2 pcs

3.5 mm x 33 mm

Phillips Round

Head Screw

H8 = 8pcs

4 mm x 45 mm

Phillips Flat

Head Screw

H4 = 16 pcs

T1 = 1 pc

A1 = 1 pc

Red Puck

A6 = 1 pc

USB Cable 1mm Shim Pack

A7 = 1 pc A8 = 3 pcs

Felt Pad

A3 = 2 pcs

NOTE: A3 Felt Pads may already

Used to level table if required

Used to charge A1 and A2

Strikers only

be attached to A1 and A2 Strikers.

H3 = 4 pcs

8 mm x 28 mm

Allen Head Bolt

Allen Wrench

3.5 mm x 14 mm

Phillips Flat

Head Screw

H6 = 2 pcs

Red LED StrikerBlue LED Striker

A2 = 1 pc

Blue LED Puck

A4 = 1 pc

Red LED Puck

A5 = 1 pc

2mm Shim Pack

A9 = 3 pcs

P List

P1 = 1 pc P2 = 2 pcs P3 = 2 pcs

Left Leg Right Leg

Air Hockey

Table Cabinet

P5 = 1 pcs P6 = 1 pcs P7 = 2 pcs

End Leg Panel Side Leg Panel

P8 = 2 pcs

End Apron

P9 = 1 pc

Side Apron

Side Leg

Support Board A

Side Leg

Support Board B

P11 = 4 pcs

Corner Post

P4 = 2 pcs

P10 = 1 pc

Side Apron with

ON/OFF Slot

P12 = 1 pc

Scorer Console

s List

FIGURE 1

1 pc -

P1 Air Hockey Table Cabinet

Support

Beam

Support

Beam

NOTE:BE SURE LEFT LEGS(P2) AND RIGHT

LEGS(P3) ARE INSTALLED INSIDE OF

SUPPORT BEAMS AS PER DIAGRAM

STEP:1

Install Left Legs (P2) and Right Legs (P3) onto Air Hockey Table Cabinet (P1) with Allen

Head Bolts (H1) and Flat Washers (H2) using Allen Wrench (T1) as shown in FIGURE 1.

Do not tighten Bolts (H1) at this time.

PARTS REQUIRED:

H1 8 x 35mm Allen Head Bolt

12 pcs -

P2 Left Leg2 pcs - P3 Right Leg2 pcs -

H2 8.5 x 22mm Flat Washer12 pcs -

T1 Allen Wrench1 pc -

H1 H2

Leave Air Hockey Table Cabinet (P1) face down in carton to assemble.

FIGURE 2

STEP:2

Install End Leg Panels (P7) and Side Leg Panels (P8) onto the Legs using Bolts (H1) and Flat

Washers (H2) as shown in FIGURE 2

Next, install Side Leg Support Board A (P9) and Side Leg Support Board B (P10) onto inside of

Side Leg Panels (P8) with Bolts (H3) and Flat Washers (H2) using Allen Wrench (T1) as shown

in DETAIL A and DETAIL B.

Next, screw Side Leg Support Board A (P9) and Side Leg Support Board B (P10) to Air Hockey

Table Cabinet (P1) using Screws (H4) as shown in DETAIL A and DETAIL B.

Do not strip out Screws(H4).

Tighten Bolts(H1) from Step 1 at this time.

PARTS REQUIRED:

H1 8 x 35mm Allen Head Bolt16 pcs -

H4 4 x 45mm Philips Flat Head Screw4 pcs - P7 End Leg Panel2 pcs -

P8 Side Leg Panel2 pcs -

H2 8.5 x 22mm Flat Washer20 pcs -

H3 8 X 28mm Allen Head Bolt

Side Leg Support Board A Side Leg Support Board B

4 pcs -

P91 pc -

P101 pc -

P10

DETAIL B

DETAIL A

H1 H2

P10

NOTE:Side Leg Support Board A(P9) and

Side Leg Support Board B(P10) must fit

inside of Side Leg Panels(P8)

NOTE:This Side Leg

Support Board will

straddle the Air

Blower Fan.

FIGURE 3

NOTE:Side Apron with ON/OFF Slot (P6)

must be on the same side of A/C

Adapter(C2) and ON/OFF Switch(C1)

STEP:3

Next, Attach all apron support blocks to the main cabinet using screws (H4) as per

DETAIL D

and

DETAIL E.

Lastly , install screws (H8) using predrilled holes into side aprons only as shown in

DETAIL D

Tighten, but do not strip out any Screws.

PARTS REQUIRED:

3.5x 33mm Philips Round Head Screw

4 pcs -

H5 3.5 x 12mm Philips Round Head Screw

8 pcs -

4 x 45mm Philips Flat Head Screw

12 pcs -

Apron support block

DETAIL D

DETAIL C

Install End Aprons (P4), Side Apron (P5) and Side Apron with ON/OFF Slot (P6) as shown in

FIGURE 3.

Slide Corner Posts (P11) down onto each end of End Aprons and Side Aprons, and attached them

using Screws (H5) as shown in DETAIL C.

P11

DETAIL E

2 pcs - P4 End Apron

1 pc - P6 Side Apron with ON/OFF Slot

1 pc - P5 Side Apron 4 pcs - P11 Corner Post

NOTE:Double check that

these connections are tight. NOTE: lightly push in

on all connections to

insure good connections.

P6 Side Apron

with ON/OFF Slot

(non laminated side)

C1- ON/OFF Switch

C2- A/C

Adapter

C3-Junction Box

Air Blower

Female Socket

Plug into wall outlet

Left LED Goal

Left LED Lights

Left Sensor

Electronic Scorer

Right LED Goal

Right LED Lights

Right Sensor

STEP:4

Install ON/OFF Switch (C1) onto inside of Side Apron with ON/OFF Slot (P6) using pre-drilled

holes with Philips Flat Head Screws (H6) as shown in FIGURE 4.

Tighten, but do not strip out Screws (H6).

PARTS REQUIRED:

H6 3.5 x 14mm Philips Flat Head Screw2 pcs - C1 ON/OFF Switch1 pc -

FIGURE 4

IMPORTANT NOTE:

WHEN TURING TABLE UPRIGHT

DO NOT REST TABLE ON THE SIDE OF

LEGS AS THIS COULD DAMAGE THEM.

STEP:5

With the help of at least four other adults, carefully lift and rotate table into upright position.

First,feed the Scorer Console (P12) plug down through the hole on one side of the long top

rail as shown in FIGURE 6.

Next, connect the Scorer Console plug to Junction Box (C3) as shown in DETAIL F.

Next, install Scorer Console (P12) onto long top rail using Philips Round Head Screws (H7)

as shown in FIGURE 6.

Tighten, but do not strip out Screws (H7).

PARTS REQUIRED:

H7 3.5 x 18mm Philips Round Head Screw2 pcs - P12 Scorer Console1 pc -

P12

Junction Box (

C3)

Junction Box (

C3)

tabs

FIGURE 6

DETAIL F

THIS STEP REQUIRES FOUR OR MORE ADULTS.

VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON

ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.

CONTROL

SENS

SENSOR1

NOTE:Make sure tabs on

plug are turned correctly

for correct installation.

NOTE:Corner caps are attached

only snug. This allows for the

unlikely but possible need to

repair the side track lights .

CARE AND USE OF YOUR HOCKEY TABLE

rofdednetnisitcudorpsihT ROODNI .ylnoesu

.5 DO NOT

DO NOT

It is suggested that this table be placed close to wall thus allowing the air motor

cord to NOT be a trip hazard. Always turn air motor off when table is not in use.

.elbatehtnonaelrobmilc,tis

This will damage the legs..tignivomnehwelbatehtgard

.elbatehtnosknirdtes

For long life and best play from your air hockey table, apply spray furniture polish

to a clean cloth and wipe down the playfield with air motor running to make the

st play and frequently thereafter.

4. DO NOT operate the motor if the cord is damaged in any way.

Congratulations! You have now assembled your Hockey Table. Please note the Care and Use

instructions below to ensure many years of trouble free use of your Hockey Table.

Use only a suitable 120v AC household outlet, and insure the cord is not a trip hazard.

HOCKEY GAME RULES:

1. This game is designed to be played with two (2) players, one at each end, or with four (4) players,

two at each end of the game table.

2. Flip a coin to determine who will begin play, or a face-off can be held at the center of the table.

3. Play begins when the puck is placed on the playing surface. Players must hit the puck with the

strikers and attempt to shoot into the opponent’s goal.

4. One point is awarded when a puck is shot into the opponent’s goal.

5. Winning the game: the winning score is accomplished by being the first player to reach a

predetermined score or by being the player to score the most points within a given period of time.

ELECTRONIC SCORER OPERATION:

POWER ON/OFF = Press POWER ON/OFF button to start or turn off the scoring unit.

START/PAUSE = Press START/PAUSE button to START the game. Press START/PAUSE button

during game will PAUSE or RESUME the game.

= Press SELECT/RESET button to select time options 5, 10, 15 minutes or No Time

Limit. Long press SELECT/RESET button to reset back to the game option.

LIGHT ON/OFF

SELECT/RESET

= Press LIGHT ON/OFF button to turn on or turn off the Light.

SOUND ON/OFF = Press Sound ON/OFF button to turn on or turn off the Sound.

NOTE: Use A8 and A9 Shim packs alone with a carpenter’s level to level table.

Inhaltsverzeichnis

Andere Atomic Arcade-Spielautomat Handbücher

Atomic

Atomic G01889CF Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung