Atomic 45-6666W/F Bedienungsanleitung

888-996-2729-1

1353-378-668-1:XAF

moc.stropsedalacse@gameroom

ytilauqtsehgihehtfoerastcudorpruotahterusneotevirtseW

fi,revewoH.strapgnissimrostcefedgnirutcafunamfoe

erfdna

,tcudorpwenruoyhtiwsmelborpynaevahuoy

EROTSEHTOTTINRUTERTONOD ,

:@eerfllotsutcatnocesaelp

:otetirwrO

stropSedalacsE

tnemtrapeDecivreSremotsuC

988xoB.O.P

60774NI,ellivsnavE

date code (if,rebmunledomruoyedivorpesaelpstropSedalacsEgnitcatnocnehW

erasrebmunesehT.traptnemecalp

eragnitseuqerfirebmuntrapdna,)elbacilppa

.launamsrenwosihtnidna,gnigakcap,tcudorpehtnodetacol

rebmuNledoMruoY

.straptuobagniriuqninehwdate coderuoyevahesaelP

45-6666W/F

Date Code: 2 - 45-6666W/F - - HL

Purchase Date:

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

Make sure you understand the following tips before you begin to assemble your hockey table.

1. Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please

read and understand the text before starting each assembly step.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

This Full Strength 4 player LED Air Hockey Table

Assembly Tips

Tools Required:

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS HOCKEY TABLE

TOGETHER.

T1 - Allen Wrench (Included)

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSEMBLY.

Phillips Screwdriver

Furniture Polish and Cloth

ATTENTION:

1. Read all instructions-All the safety and operating instructions should be read carefully before the hockey game is

played.

2. Caution-This is not a toy and is intended for use by or under the supervision of adults. Adults should review

safety guidelines with children to avoid possible risk of electric shock or other injuries.

3. Power sources-This hockey game should be operated only from 110-120V A.C., 60 cycle current as indicated on

the identification label. If you are not sure of the type of power supply to your home, consult your appliance dealer

or local power company.

4. Power cord protection-Power cord should be routed so that it is not likely to be walked on or pinched by items

placed upon or against it. Pay particular attention to cords at plugs, convenience receptacles, and the point of

exit from the game.

5. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

6. Object and liquid entry-Never push objects of any kind into this game through openings as they may touch

dangerous voltage points or short-out parts which could result in a fire or electric shock. Never spill liquid of any

kind on the game.

7. Ventilation-Openings in the game are provided for the exhaust air to create a cushion effect. The openings on

the air blower are for the intake air. Keep clear of the air blower when it is on. Do not put hand or other objects

near the intake openings. To ensure reliable operation of the game and protect it from overheating these openings

must not be blocked or covered.

8. Damage requiring service-Unplug the game from the wall outlet.

Do not attempt to service the blower yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer servicing to qualified service personnel under the following conditions.

A. When the power supply cord or plug is damaged.

B. If liquid has spilled, or objects have fallen into the blower.

C. When the air blower exhibits a distinct change in performance e.g. abnormal noise, this indicates a need for

service.

9. CAUTION-ELECTRICALLY OPERATED PRODUCT-Not recommended for children

under 8 years of age. As with all electrical products, precautions should be observed

during handling and use to reduce the risk of electric shock.

10. We recommend that the game be periodically examined for conditions that may result in the risk of fire, electrical

shock, or injury to persons. In the event such conditions exist, the game should not be used until properly

repaired.

11. RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

WARNING-When using electric appliances, basic precautions should always be followed, including the following:

A) Read all the instructions before using the appliances.

B) To reduce the risk of injury, close supervision is necessary when an appliance is used near children.

C) Do not contact moving parts.

D) Only use attachment recommended or sold by the manufacturer.

E) Do not use outdoors.

F) For a cord-connected appliance, the following shall be included:

-To disconnect, turn all controls to the off position, then remove plug from outlet.

-Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

-Unplug from outlet when not in use and before servicing or cleaning.

-Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or

damaged in any manner. Stop using this product and call our customer service department for a replacement part.

SAVE THESE INSTRUCTIONS

WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any

Solid-State Speed Control Device.

For Household use only.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS

HARDWARE IDENTIFIER

(To Scale)

H1 - 6 mm x 35 mm

Allen Head Bolt

(16 pcs)

H2 - 6.3 mm x 16 mm

Flat Washer

(16 pcs)

H3 - 3.5 mm x 14 mm

Phillips Round

Head Screw

(48pcs)

(Not to Scale)

T1 - Allen Wrench

(1 pc)

(80 pcs)

- 4 mm x 40 mm

Phillips Flat

Head Screw

ACCESSORIES IDENTIFIER

(Not to Scale)

(4 pcs) (2 pcs)

-Red LED StrikerA1 -Red Puck

(2 pcs)

-Red LED PuckA3 A4- Felt Pad

(4 pcs)

A5-USB Cable

(2 pcs)

A6-Goal Box Puck

Blocker Insert

(2 pcs)

A7-A/C Adapter

(1 pc)

Used to charge A1 Strikers only

NOTE: A4 Felt Pads may already

Note: used to covert 4-player

game to 3-player or 2-player game

be attached to A1 Strikers.

P6- End Leg Panel

(Atomic logo) (Full Strength logo)

2 pcs

P7- End Leg Panel

2 pcs

P8- Leg Bottom Board

PARTS IDENTIFIER

(Not to Scale)

P1 - Air Hockey Cabinet

with 2 DC Fan motors

(1 pc)

P2 - Left Leg panel

(4pcs)

P3 - Right Leg panel

(4 pcs)

P9- Leg Attaching Board P10-Hinge

Factory Installed on all P6

and P7 End Leg Panels

(4 pcs)

P4 - Front Leg panel

(4pcs)

P5 - Back Leg panel

(4 pcs)

(16 pcs)

P11- Goal Box with Sensors

and Connecting Wires

(4 pcs)

With P-10 factory installed hinges With P-10 factory installed hinges

STEP 1:

48 pcs - H4 4 X 40mm Phillips Flat Head Screw 4 pcs - P2 Left Leg panel

4 pcs - P3 Right Leg panel 4 pcs - P4 Front Leg panel 4 pcs - P5 Back Leg panel

PARTS REQUIRED:

Install one Left Leg Panel P2 and one Right Leg panel P3 onto the edges of one Front Leg Panel P4

using Screws H4 as shown in Figure A-1 and Figure A-2.

Install one Back Leg panel P5 onto the edges of one Left Leg Panel P2 and one Right Leg panel P3

using Screws H4 as shown in Figure B.

TIGHTEN, BUT DO NOT STRIP OUT SCREWS.

Repeat procedure for the other 3 legs.

IMPORTANT NOTE: INSTALL P2 LEFT, P3 RIGHT, P4 FRONT

AND P5 BACK LEG PANELS WITH ALL ARROWS POINTING

SAME DIRECTION AS SHOWN.

Helpful Hint: Each leg (of 4 pcs) is packed separately in 4 cartons.

Figure A-1 Figure A-2 Figure B

Raw wood up

Mitered edge

H4 H4

P4 P4

Arrows Pointing

on this side

Arrows must be

as per diagram.

Arrow Pointing

on this side

Helpful Hint: place partial leg assembly

open side up and install P5 by shooting

Screws H4 straight down.

P9 Counter sink holes

this side

STEP 2:

32 pcs - H4 4 X 40mm Phillips Flat Head Screw

4 pcs - P8 Leg Bottom Board4 pcs - P9 Leg Attaching Board

PARTS REQUIRED:

Install Leg Attaching Boards P9 onto each assembled Leg using Phillips Flat Head Screws H4 as

shown in Figure C.

Install Leg Bottom Boards P8 onto each assembled Leg using Phillips Flat Head Screws H4 as

shown in Figure C.

TIGHTEN, BUT DO NOT STRIP OUT SCREWS.

Repeat procedure for the other 3 legs.

16 pcs - H1 6 X 35mm Allen Head Bolt

16 pcs - H2 6.3 X 16mm Flat Washer 1 pc - T1 Allen Wrench

1 pc - P1 Air Hockey Cabinet

STEP 3:

Install each Leg assembly onto Air Hockey Cabinet P1 using four Allen Head Bolts H1 with Four

Flat Washers H2 as shown in FIGURE D.

DO NOT TIGHTEN H1 BOLTS ON THIS TIME.

Repeat procedure for the other Legs.

See IMPORTANT NOTE below.

NOTE: Counter sink holes this

side. Tighten screws slightly in

board into P8 holes, so screw

heads do not scratch your floor.

Figure C

Figure D

NOTE: Pilot holes to inside

of legs. And legs angle outward.

NOTE: ARROWS POINTING ON THE

LEG PANELS POINT TOWARD LEG

SUPPORT BOARD P9.

P10

H3 H3

TIGHTEN, BUT DO NOT STRIP OUT SCREWS.

Lastly, tighten all leg attaching Bolts H1 in STEP 3 using the T1 Allen Wrench.

STEP 4:

With the help of another adult, place and hold each End Leg Panel (Atomic logo) P6 or End Leg Panel

(Full Strength logo) P7 centered and in correct position onto each leg. Install the pre-installed hinges

on Back Leg Panel P5 using pilot holes with Screws H3 as shown in FIGURE E and DETAIL 1.

32 pcs - H3 3.5 X 14mm Phillips Round Head Screw

2 pcs - P6 End Leg Panel (Atomic logo) 2 pcs - P7 End Leg Panel (Full Strength logo)

PARTS REQUIRED:

IMPORTANT NOTE: It may be

necessary to slightly move

the legs in order to achieve

correct placement of the P7

and P8 End Leg Panels in

STEP 4 and Figure E.

NOTE: All End Leg Panels logos

will be upside down and must face

outward for this assembly step.

Caution: Do not step on table during

this assembly step.

DETAIL 1

Figure E

NOTE:Two End Leg Panels (Atomic logo) P6

are opposite to each other. Two End Leg

Panels (Full Strength logo) P7 are opposite

to each other.

use pilot holes

Note: A/C

adapter plugs

in here

Note: While table is upside down, check all electrical

connections and confirm they are all tight.

P11

Goal Box

P11

H3 H3

TIGHTEN, BUT DO NOT STRIP OUT SCREWS.

STEP 5:

First, feed the female plug of each Goal Box with Sensors and connecting wires P11 through the hole

on each side apron as shown in DETAIL 2.

Connect the female plug to the male plug near the hole as shown in DETAIL 2 and DETAIL 3.

Lastly, secure Goal Box P11 onto Air Hockey Cabinet P1 using pilot holes with Phillips Round Head

Screws H3 as shown in FIGURE F.

16 pcs - H3 3.5 X 14mm Phillips Round Head Screw

4 pcs - P11 Goal Box with Sensors and Connecting Wires

PARTS REQUIRED:

DETAIL 2

Figure F

DETAIL 3

NOTE:Make sure slots on plugs are turned correctly

for correct installation.DO NOT FORCE THIS

CONNECTION and a flashlight will be very helpful to

study both the male plug and female Plug to insure

a correct connection.

CARE AND USE OF YOUR HOCKEY TABLE

rofdednetnisitcudorpsihT ROODNI .ylnoesu

.5 DO NOT

DO NOT

It is suggested that this table be placed close to wall thus allowing the air motor

cord to NOT be a trip hazard. Always turn air motor off when table is not in use.

.elbatehtnonaelrobmilc,tis

This will damage the legs..tignivomnehwelbatehtgard

.elbatehtnosknirdtes

For long life and best play from your air hockey table, apply spray furniture polish

to a clean cloth and wipe down the playfield with air motor running to make the

best play and frequently thereafter.

4. DO NOT operate the motor if the cord is damaged in any way.

Congratulations! You have now assembled your Hockey Table. Please note the Care and Use

instructions below to ensure many years of trouble free use of your Hockey Table.

Use only a suitable 120v AC household outlet, and insure the cord is not a trip hazard.

4 Player Air Powered Hockey Game Modes & Rules:

Game Mode 1 (default mode) 2 Player Traditional Hockey

In this game mode, only Player 1 and Player 2 goal boxes are active for scoring. Be sure to insert the

goal box puck blocking inserts into player 3 and 4 goal boxes to keep the puck in play. Its traditional

head to head air hockey game play and each goal scored counts as 1 point. The first person to score

9 goals is the winner. The LED electronic scorer will display the goals you have scored.

Game Mode 2 2 Player Elimination Hockey

In this game mode, only Player 1 and Player 2 goal boxes are active for scoring. Be sure to insert the

goal box puck blocking inserts into player 3 and 4 goal boxes to keep the puck in play. Its Eliminator

style hockey where the rules are simple. Each player gets 3 lives to start the game as indicated on

the LED scoring display. After each goal that gets scored upon you, one life will be deducted from

your LED screen. Once you are down to zero on the LED screen, you have been eliminated from the

game! 2 player elimination mode provides a shorter game length and is ideal for a quick game of 2

player hockey.

ELECTRONIC SCORER OPERATION:

Press the ON / OFF button to turn on the air powered game table. Press the START button to go to

Game mode 1 : 2 player Traditional Hockey game mode. To play this default mode game, Press

the START button again to begin play.

If you would like to play one of the other exciting game modes, simply continuously press the MODE

button after the table is turned on to toggle through the 6 different game modes. Once you have selected

the game mode of your choice, press the START button to begin game play of the game mode selected.

Below is the game mode menu and game rules for each:

GAME MODE MENU LIST

1, 2 Player Traditional Hockey

2, 2 Player Elimination Hockey

3, 3 Player Elimination Hockey

4, 4 Player Elimination Hockey

5, 4 Player Team Play Traditional Hockey

6, 4 Player Team Play Elimination Hockey

LED will show “0” in the player 1 and player 2 location

LED will show “3” in the player 1 and player 2 location

LED will show “3” in the player 1, 2, and 3 player location

LED will show “3” in all 4 player locations

LED will show “0” in all 4 player locations

LED will show “3” in all 4 player locations

Inhaltsverzeichnis

Sprachen:

Andere Atomic Inneneinrichtung Handbücher

Atomic

Atomic M01702AW Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung