Atrust P2T USB Bedienungsanleitung
Version 2.05
© 2017-18 Atrust Computer Corp.
User’s Manual
Atrust P2T USB
From PCs to Thin Clients
UM-P2T-USB-EN-20033015
i
Copyright and Trademark Statements
© 2017-18 Atrust Computer Corp. All rights reserved.
This document contains proprietary information that is protected by copyright. No part of this document may be
photocopied, reproduced, or translated to another language without the prior written consent of Atrust Computer
Corp.
Disclaimer
Atrust Computer Corp. (“Atrust”) makes no representations or warranties with respect to the contents or use of
this document, and specically disclaims any express or implied warranties of merchantability or tness for any
particular purpose. Atrust is not liable for technical or editorial errors or omissions contained herein. The information
in this document is subject to change without notice.
Trademark Statements
Atrust is a trademark of Atrust Computer Corp.
Microsoft, Windows, Windows Server, RemoteFX, and MultiPoint are trademarks or registered trademarks of the
Microsoft group of companies.
Citrix, ICA, XenApp, XenDesktop, and VDI-in-a-Box are trademarks of Citrix Systems, Inc. and/or one or more of its
subsidiaries, and may be registered in the United States Patent and Trademark Oce and in other countries.
VMware, VMware View, and VMware Horizon View are trademarks or registered trademarks of the VMware, Inc.
PCoIP is a registered trademark of Teradici Corporation in the United States and/or other countries.
The Parallels and 2X are registered trademarks of Parallels International GmbH.
Other product names mentioned herein are used for identication purposes only and may be trademarks and/or
registered trademarks of their respective companies.
ii
About This User’s Manual
This manual provides instructions on how to make use of an existing computer and Atrust P2T USB to provide Atrust
Linux-based thin client experience.
Manual Structure and Subjects
Chapter Subject
1 Provides instructions on the use of Atrust P2T USB.
Appendices Provide instructions on booting, information on supportability, setup notes, and known
issues for tested devices.
Notes, Tips, and Warnings
Throughout this manual, the notes, tips, and warnings in the following formats are used to provide important
information, useful advice, and prevent injuries to you, damage to your devices, or loss of data on your system.
NOTE
• A note provides important information for a specic situation.
TIP
• A tip gives a piece of useful advice to perform a task more eciently.
WARNING
• A warning provides crucial information that must be followed to prevent injuries to
you, damage to your devices, or loss of data on your system.
iii
Safety and Regulatory Information
Regulatory Statement
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
WEEE (Waste Electrical and Electronic Equipment) Directive
In the European Union, this symbol indicates that this product should not be disposed of with
household waste. It should be deposited at an appropriate facility to enable recovery and recycling. For
proper disposal, please contact your local recycling or hazardous waste center.
RoHS 2 (Restriction of the use of Hazardous Substances) Directive
This product of Atrust Computer Corp. fulls the requirements of the EU directive 2011/65/EU on the Restriction of
the use of certain Hazardous Substances in electrical and electronic equipment (RoHS 2). The CE marking is applied
on the product accordingly.
REACH (Registration, Evaluation, Authorisation and restriction of Chemicals) Regulation
REACH (EC 1907/2006) aims to improve the protection of human health and the environment through the better
and earlier identication of the intrinsic properties of chemical substances. This is done by the four processes of
REACH, namely the registration, evaluation, authorisation and restriction of chemicals. REACH also aims to enhance
innovation and competitiveness of the EU chemicals industry. Atrust Computer Corp. and our suppliers have taken
the necessary action to meet the requirements of REACH.
iv
v
Table of Contents
Copyright and Trademark Statements i
Disclaimer i
Trademark Statements i
About This User’s Manual ii
Manual Structure and Subjects ii
Notes, Tips, and Warnings ii
Safety and Regulatory Information iii
Regulatory Statement iii
1 Using Atrust P2T USB 1
1.1 Introduction 3
1.2 Features 3
1.3 Technical Specications 3
1.4 Getting Started 4
Appendices 7
A.1 Booting from Your P2T USB 9
A.2 Supportability, Setup Notes, and Known Issues 10
vi
Using Atrust P2T USB
1
This chapter provides instructions on the use of Atrust P2T USB.
1.1 Introduction
Desktop virtualization and simplied endpoint device 3
1.2 Features
The key features of Atrust P2T USB 3
1.3 Technical Specications
System requirements 3
1.4 Getting Started
The use of Atrust P2T USB 4
Inhaltsverzeichnis
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
