ATTO Technology Celerity FC-164E Bedienungsanleitung

ATTO Celerity Fibre Channel Host Adapters

Installation and Operation Manual

Celerity FC-164E

16Gb FC quad channel PCIe 3.0 host adapter

Celerity FC-162E

16Gb FC dual channel PCIe 3.0 host adapter

Celerity FC-161E

16Gb FC single channel PCIe 3.0 host adapter

Celerity FC-84EN

8Gb FC quad channel PCIe 2.0 host adapter

Celerity FC-82EN

8Gb FC dual channel PCIe 2.0 host adapter

Celerity FC-81EN

8Gb FC single channel PCIe 2.0 host adapter

ATTO Technology, Inc.

155 CrossPoint Parkway

Amherst, New York 14068 USA

www.attotech.com

Tel (716) 691-1999

Fax (716) 691-9353

Sales support: [email protected]

Technical support: Please visit

https://www.attotech.com/support/

for hours of operation.

[email protected]

(716) 691-1999 ext. 242

holders. No part of this manual may be reproduced in any form or by any means without the express written

permission of ATTO Technology, Inc.

1/2016 PRMA-0344-000

Contents

1 ATTO Celerity HBA Features & Overview ........................................................1

Celerity Getting started

Celerity 164E technical specifications

Celerity 162E Technical specifications

Celerity 161E Technical specifications

Celerity 84EN Technical specifications

Celerity 82EN Technical specifications

Celerity 81EN Technical specifications

2 Install Drivers .....................................................................................................8

Windows

OS X

Linux

VMware ESXi 5

VMware ESX/ESXi 4

FreeBSD

Specialized configurations

3 Hardware Installation..........................................................................................14

Bracket details

Adapter board details

4 Updating Hardware Flash, Drivers ....................................................................20

5 Troubleshooting .................................................................................................22

General suggestions

Mac OS X

Windows

Linux

VMware

Celerity FreeBSD

Celerity Supplemental Guide for VMware ESX/ESXi

Celerity Virtual Ports (NPIV)

Appendix A Glossary ............................................................................................i

Appendix B Accessories ......................................................................................iii

Appendix C Standards, Compliances: 16Gb adapters ......................................ix

FCC standards: radio and television interference

Canadian standards

European standards

Appendix D Standards, Compliances: 8Gb adapters ........................................x

FCC standards: radio and television interference

Canadian standards

European standards

Appendix E Safety, Warranty ...............................................................................xii

Safety

ATTO Technology, Inc. limited warranty

1 ATTO Celerity HBA Features & Overview

The ATTO Celerity Fibre Channel family of storage products provides connectivity, intelligence and scalability.

Celerity FC host adapters simplify advanced storage

networking needs such as switching, backup and data

management. Specifically designed to enhance the

functionality of third party fabric hardware and

software, Celerity FC products are the industry-

leading platform for storage connectivity.

Fibre Channel is a serial communications technology

designed to transfer large amounts of data among a

variety of hardware systems over long distances. It is

a key technology for applications that require shared,

high bandwidth access to storage.

Fibre Channel provides a logical, point-to-point, serial

channel for the transfer of data between a buffer at a

source device and a buffer at a destination device. It

moves buffer contents from one port to another,

without regard to the format or meaning of the data so

different upper level protocols are able to run over

Fibre Channel hardware.

The Fibre Channel architecture is structured as a

hierarchical set of protocol layers. Defined within these

layers are rules for signal interfaces, serial encoding

and decoding, error control, frame format and

communications protocols.

Getting started

In general, to install the ATTO Celerity FC host

adapter, you must:

1 Ensure you have the equipment and software

you need for the installation:

• Celerity FC adapter

• ATTO Celerity drivers, downloaded from the

ATTO website (https://www.attotech.com/)

• A computer with an available expansion slot

• Storage, cables and connectors

2 Install drivers for your operating system. Refer

to Install Drivers.

3 Install the configuration software from the

ATTO download pages.

4 Install the Celerity adapter. Refer to Hardware

Installation.

5 Attach storage.

6 If required, configure your Celerity adapter

using the ATTO Configuration Tool.

Note

Default settings are appropriate for most

systems but you may change settings using

the ATTO Configuration Tool.

2 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

Celerity Fibre Channel 16Gb Adapters

The ATTO Celerity 16Gb HBAs leverage two next-

generation storage technologies: PCIe 3.0

interconnect and 16-Gigabit Fibre Channel.

With 16-Gb FC speeds of up to 1600 MB/sec. per

channel, 16Gb Celerity adapters support the most

demanding application requirements, including high-

definition video, rich content databases and other

high-bandwidth environments.

ATTO Celerity host adapters are an integrated family

of advanced storage connectivity solutions that are

designed to provide reliable connectivity, intelligence

and scalability.

164E technical specifications

• Four independent Fibre Channel ports

• 16-Gigabit data transfer rates

• 3200 MB/sec. maximum full-duplex throughput

per channel

• Supports all FC topologies: fabric, arbitrated

loop and point-to-point

• ANSI Fibre Channel: FC-FS, FC-AL, FCP, FC-

AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 81

• ATTO Advanced Data Streaming (ADS™)

Technology

• Length: 6.600 inches

• Height: 4.376 inches

• Operating temperature and Airflow: 0-40 ºC (32-

104 ºF) 100lfm minimum recommended;

40-55 ºC (104-132

ºF) 300lfm minimum

recommended

• Storage temperature: -40 to 70 ºC (-40 to 158 ºF)

• Relative humidity: 10 to 95% non-condensing

• RoHS compliant

162E Technical specifications

• Two independent Fibre Channel ports

• 16-Gigabit data transfer rates

• 3200 MB/sec. maximum full-duplex throughput

per channel

• Supports all FC topologies: fabric, arbitrated

loop and point-to-point

• ANSI Fibre Channel: FC-FS, FC-AL, FCP, FC-

AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 81

• ATTO Advanced Data Streaming (ADS™)

Technology

• Length: 6.600 inches

• Height: 2.731 inches

• Operating temperature and Airflow: 0-40 ºC (32-

104 ºF) - 60lfm minimum recommended;

40-55 ºC (104-132

ºF) 100lfm minimum

recommended

• Storage temperature: -40 to 70 ºC (-40 to 158 ºF)

• Relative humidity: 10 to 95% non-condensing

• RoHS compliant

161E Technical specifications

• One Fibre Channel port

• 16-Gigabit data transfer rates

• 3200 MB/sec. maximum full-duplex throughput

per channel

• Supports all FC topologies: fabric, arbitrated

loop and point-to-point

• ANSI Fibre Channel: FC-FS, FC-AL, FCP, FC-

AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 81

• ATTO Advanced Data Streaming (ADS™)

Technology

• Length: 6.600 inches

• Height: 2.731 inches

• Operating temperature and Airflow: 0-40 ºC (32-

104 ºF) - 60lfm minimum recommended;

40-55 ºC (104-132 ºF) 100lfm minimum

recommended

• Storage temperature: -40 to 70 ºC (-40 to 158 ºF)

• Relative humidity: 5 to 95% non-condensing

• 10.97W

• RoHS compliant

4 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

Celerity Fibre Channel 8Gb Adapters

The ATTO Celerity 8Gb HBAs leverage two next-

generation storage technologies: PCIe 2.0

interconnect and 8-Gigabit Fibre Channel.

With 8-Gb FC speeds of up to 800 MB/sec. per

channel, 8Gb Celerity adapters support the most

demanding application requirements, including high-

definition video, rich content databases and other

high-bandwidth environments.

ATTO Celerity host adapters are an integrated family

of advanced storage connectivity solutions that are

designed to provide reliable connectivity, intelligence

and scalability.

84EN Technical specifications

• Four independent Fibre Channel ports 8-Gigabit

data transfer rates

• 1600 MB/sec. maximum full-duplex throughput

per channel

• Supports all FC topologies: fabric, arbitrated

loop and point-to-point

• ANSI Fibre Channel: FC-FS, FC-AL, FCP, FC-

AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 41

• ATTO Advanced Data Streaming (ADS™)

Technology

• Length: 6.6 inches

• Height: 3.987 inches

• Operating temperature: 0-40 ºC (32-104 ºF)

• Storage temperature: -40 to 70 ºC (-40 to 158 ºF)

• Relative humidity: 10 to 90% non-condensing

• 7.8 W (typical)

• 100 lf/m (minimum) airflow recommended

• RoHS compliant

82EN Technical specifications

• Two independent Fibre Channel ports

• 1600 MB/sec. maximum throughput per channel

in full-duplex mode

• 8-Gigabit data transfer rates

• Conforms to PCI Express Low Profile form-

factor specifications

• Supports all FC topologies: fabric, arbitrated

loop and point-to-point

• ANSI Fibre Channel: FC-FS, FC-AL, FCP, FC-

AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 41

• ATTO Advanced Data Streaming (ADS™)

Technology

• Length: 6.6 inches

• Height: 2.731 inches

• Operating temperature: 0-40 ºC (32-104 ºF)

• Storage temperature: -40 to 70 ºC (-40 to 158 ºF)

• Relative humidity: 10 to 90% non-condensing

• 5.9W (typical)

• 100 lf/m (minimum) airflow recommended

• RoHS compliant

81EN Technical specifications

• One independent Fibre Channel port

• 8-Gigabit FC data transfer rates

• 1600 MB/sec. throughput in full-duplex mode

• Supports all FC topologies: fabric, arbitrated

loop and point-to-point

• ANSI Fibre Channel: FC-FS, FC-AL, FCP, FC-

AL2, FC-PLDA, FC-FLA

• Flash ROM for easy field upgrades

• FC Class 3 support

• Local management and diagnostics

• Buffer credits: 41

• ATTO Advanced Data Streaming (ADS™)

Technology

• Length: 6.6 inches

• Height: 2.731 inches

• Operating temperature: 0-45ºC (32-113ºF)

• Storage temperature: -40 to 70ºC (-40 to 158ºF)

• Relative humidity: 10 to 90% non-condensing

• 5.3 W (typical)

• 100 lf/m (minimum) airflow recommended

• RoHS compliant

6 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

Selection guide: Celerity 16Gb adapters

Product Features FC-164E FC-162E FC-161E

Fibre Channel Ports 421

FC protocol 16-Gb 16-Gb 16-Gb

Maximum Transfer Rate (full duplex) 6400 MB/sec 3200 MB/sec 1600 MB/sec.

Bus type PCIe 3.0 PCIe 3.0 PCIe 3.0

Bus characteristics 8 lane 8 lane 8 lane

Optical interface SFP+ LC SFP+ LC SFP+ LC

Maximum cable length (OM2 type cable) 50m@8-Gb

35m@16-Gb

50m@8-Gb

35m@16-Gb

50m@8-Gb

35m@16-Gb

Low profile form factor 

Advanced Data Streaming (ADS™) Technology 

Software RAID support1

Developer's kit (Target Mode & API) 

Windows support 

Linux driver support 

Macintosh OS X driver support 

FreeBSD driver support 

VMware ESXi Server 6.0, 5.5 and 5.1 

Windows Hyper-V 

1 ATTO Express Power Center recommended

Andere Handbücher für Celerity FC-164E

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ATTO Technology Adapter Handbücher

ATTO Technology

ATTO Technology FC 3300 Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-24XL Bedienungsanleitung

ATTO Technology

ATTO Technology EPCI-UL4D Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressSAS Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Bedienungsanleitung

ATTO Technology

ATTO Technology ThunderLink FC 3322 Bedienungsanleitung

ATTO Technology

ATTO Technology R30F Bedienungsanleitung

ATTO Technology

ATTO Technology ThunderStream Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-21PS Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-41XS Bedienungsanleitung

ATTO Technology

ATTO Technology UL25 Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 2600 Bedienungsanleitung

ATTO Technology

ATTO Technology FastFrame Series Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-22XH Bedienungsanleitung

ATTO Technology

ATTO Technology Express SAS R348 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung