ATTO Technology ATTO ExpressPCI FC 3321 Bedienungsanleitung

ATTO Technology, Inc.

Installation and Operation Manual

ATTO ExpressPCI FC 3321

Dual channel 2-Gigabit FC-to-PCI Host Adapter, SW optical LC SFF interface

ATTO ExpressPCI FC 3322

Dual channel 2-Gigabit FC-to-PCI-X Host Adapter, SW optical LC SFP interface

ATTO ExpressPCI FC 3342

Quad channel 2-Gigabit FC-to-PCI-X Host Adapter, SW optical LC SFP interface

respective holders. No part of this manual may be reproduced in any form or by any means without the

express written permission of ATTO Technology, Inc.

10/2003 Document Control Number: PRMA-0334-000

Contents

1 ATTO provides Fibre Channel solutions ................................................ 1

ATTO ExpressPCI FC 3321

Fibre Channel Interface

Advanced FC features

Advanced SCSI-FCP support

Exclusive Advanced Data Streaming (ADS

) Technology

Accelerated PCI bus management

Environmental & physical specifications

ATTO ExpressPCI FC 3322

Fibre Channel Interface

Advanced FC Features

Advanced SCSI-FCP Support

Exclusive Advanced Data Streaming (ADS™) Technology

Accelerated PCI Bus Management

Environmental & Physical Specifications

ATTO ExpressPCI FC 3342

Fibre Channel Interface

Advanced FC Features

Advanced SCSI-FCP Support

Exclusive Advanced Data Streaming (ADS™) Technology

Accelerated PCI Bus Management

Environmental & Physical Specifications

2 Fibre Channel is a key technology for storage ...................................... 5

Glossary

3 Hardware installation and initial configuration ...................................... 7

System requirements

Fibre Channel address

Installation

LEDs

Cabling

ExpressPCI FC 3321

ExpressPCI FC 3322

ExpressPCI FC 3342

Initial configuration

4 Installing/updating device drivers and firmware ................................... 11

Windows 2000/XP driver installation

Windows NT driver installation

Mac OS X driver installation/update

Re-flashing firmware

Linux and Sun Solaris driver installation

5 Troubleshooting ....................................................................................... 13

General suggestions

Windows 2000

Windows NT

Appendix A Standards and compliances .................................................. i

Appendix B Fibre Channel accessories ....................................................ii

Appendix C SCSI host adapter selection guide ........................................ iii

Appendix D Contact ATTO Technology, Inc. ............................................ iv

ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual

1 ATTO provides Fibre Channel solutions

ATTO ExpressPCI FC host adapters have been designed to ensure interoperability with Fibre Channel

devices and compatibility with a broad range of servers and workstations to meet your needs.

ATTO ExpressPCI FC 3321

The ATTO ExpressPCI FC 3321 host adapter

incorporates dual independent channels with 2-

Gigabit Fibre Channel performance on a single

low-profile Fibre Channel host adapter. The

ATTO ExpressPCI FC 3321 is designed to

support data-intensive applications while using

only one PCI slot, representing a cost-effective

and efficient choice for Enterprise and

Workstation applications. It supports high-

performance applications, including Digital

Video/Audio, Imaging/Fixed Content and

Backup/Archiving.

Fibre Channel Interface

❖

2.125 Gigabit data transfer rates on each

channel

❖

400 MB/sec. per channel, full duplex

❖

Auto negotiation between 1-Gigabit and

2-Gigabit speeds

❖

Short-wave optical LC SFF connectors

❖

Supports all Fibre Channel topologies

Point to point

Arbitrated loop

Switched fabric (FL-port, F-port)

❖

Strict adherence to ANSI specifications:

FC-PH, FC-AL2, FC-FCP, FC-PLDA,

FC-FLA, FCA-IP, iETF-iPFC, FC-Tape

❖

Supports Class 2 and Class 3 transfers.

❖

LED indicates link activity, on line and

fault status for each channel

❖

Flash ROM for easy field upgrades

Advanced FC features

❖

Support for SNIA HBA API

❖

LUN masking

❖

Supports target and initiator modes

Advanced SCSI-FCP support

❖

Large command FIFO

❖

Asynchronous I/O support

❖

ASPI and SCSI Manager 4.3 compatible

❖

Bootable from attached disks

❖

Support for multiple block sizes

Exclusive Advanced Data Streaming

(ADS

) Technology

❖

Improved PCI system bandwidth use

❖

Optimized FC and SCSI-3 algorithms

❖

Supports SCSI-3 tagged command

queuing

❖

RISC processor for high performance

Accelerated PCI bus management

❖

PCI Bus Master DMA

❖

PCI 2.2 and PCI 99 compliant

❖

64-bit/66 MHz PCI (backward

compatible with standard 32-bit and

33MHz busses)

Environmental & physical specifications

❖

Temperature: 0-50

❖

Humidity: 5-90% non-condensing

❖

Low profile dimensions

Height: 2.53”

Width: 6.6”

❖

Low profile and full height brackets

available

❖

MTBF: >250,000 hours

❖

MTTR: <15 minutes

❖

Power requirements:

1.5 Amp max @ 5.0 Volts

❖

Airflow: 100 LFM (min.)

❖

PCI signal compatibility:

3.3V/5V universal

Features and benefits

ATTO ExpressPCI FC 3322

The ATTO ExpressPCI FC 3322 host adapter

incorporates dual independent channels of 2-

Gigabit Fibre Channel performance on a single,

low-profile host adapter. Its low-profile design

facilitates flexibility and maximum performance

in high-density environments. It supports high-

performance applications, including Digital

Video/Audio, Imaging/Fixed Content and

Backup/Archiving.

Fibre Channel Interface

❖

2.125-Gigabit data-transfer rates on each

channel

❖

400 MB/sec. per channel, full duplex

❖

Auto negotiation between 1-Gigabit and

2-Gigabit speeds

❖

Short-wave optical LC SFP connectors

❖

Supports all Fibre Channel topologies

Point to Point

Arbitrated loop

Switched fabric (FL-port, F-port)

❖

Strict adherence to ANSI specifications:

FC-PH, FC-AL2, FC-FCP, FC-PLDA,

FC-FLA, FCA-IP, iETF-iPFC, FC-Tape

❖

Supports Class 2 and Class 3 transfers

❖

LEDs indicate link activity, on line and

fault status for each channel

❖

Flash ROM for easy field upgrades

Advanced FC Features

❖

Support for SNIA HBA API

❖

LUN Masking

❖

Supports target and initiator modes

Advanced SCSI-FCP Support

❖

Large command FIFO

❖

Asynchronous I/O support

❖

ASPI compatible

❖

Bootable from attached disks

❖

Support for multiple block sizes

Exclusive Advanced Data Streaming

(ADS™) Technology

❖

Improved PCI system bandwidth use

❖

Optimized FC and SCSI-3 algorithms

❖

Supports SCSI-3 tagged command

queuing

❖

RISC processor for high performance

Accelerated PCI Bus Management

❖

PCI bus master DMA

❖

PCI 2.2 and PCI 99 compliant

❖

64-bit/133 MHz PCI-X

Environmental & Physical Specifications

❖

Temperature:0-50

❖

Humidity:5-90% non-condensing

❖

Low-profile dimensions:

Height: 2.53"

Width: 6.521"

❖

MTBF:>250,000 hours

❖

MTTR:<15 minutes

❖

Airflow:100 LFM (min)

❖

Power Requirements:

2.0 Amps max @ 3.3 Volts

5.0 Amps max @ 5.0 Volts

❖

PCI Signal Compatibility:

3.3V/5V universal

ATTO ExpressPCI FC 3342

The ATTO ExpressPCI FC 3342 host adapter,

with four independent 2-Gigabit FC ports and

delivering data-transfer rates up to 400

MB/second per channel, provides the ultimate

performance for the most demanding data

environments. It is ideal for connecting servers

directly to multiple storage sub-systems for

advanced, aggregated performance, while still

conserving valuable PCI expansion slots. It

supports high-performance applications,

including Digital Video/Audio, Imaging/Fixed

Content and Backup/Archiving.

Fibre Channel Interface

❖

2.125-Gigabit data-transfer rates on each

channel

❖

400 MB/sec. per channel, full duplex

❖

Auto negotiation between 1-Gigabit and

2-Gigabit speeds

❖

Short-wave optical LC SFP connectors

❖

Supports all Fibre Channel topologies

Point to Point

Arbitrated loop

Switched fabric (FL-port, F-port)

❖

Strict adherence to ANSI specifications:

FC-PH, FC-AL2, FC-FCP, FC-PLDA,

FC-FLA, FCA-IP, iETF-iPFC, FC-Tape

❖

Supports Class 2 and Class 3 transfers

❖

LEDs indicate link activity, on line and

fault status for each channel

❖

Flash ROM for easy field upgrades

Advanced FC Features

❖

Support for SNIA HBA API

❖

LUN Masking

❖

Supports target and initiator modes

Advanced SCSI-FCP Support

❖

Large command FIFO

❖

Asynchronous I/O support

❖

ASPI compatible

❖

Bootable from attached disks

❖

Support for multiple block sizes

Exclusive Advanced Data Streaming

(ADS™) Technology

❖

Improved PCI system bandwidth use

❖

Optimized FC and SCSI-3 algorithms

❖

Supports SCSI-3 tagged command

queuing

❖

RISC processor for high performance

Accelerated PCI Bus Management

❖

PCI bus master DMA

❖

PCI 2.2 and PCI 99 compliant

❖

64-bit/133 MHz PCI-X

Environmental & Physical Specifications

❖

Temperature:0-50

❖

Humidity:5-90% non-condensing

❖

Low-profile dimensions:

Height: 4.2"

Width: 6.875"

❖

MTBF:>100,000 hours

❖

MTTR:<15 minutes

❖

Airflow:100 LFM (min)

❖

Power Requirements:

1.0 Amps max @ 3.3 Volts (max)

4.5 Amps max @ 5 Volts (max)

❖

PCI Signal Compatibility:

3.3 Volts only

Features and benefits

Fibre Channel host adapter selection guide

2-Gigabit Adapters

FC 3342 FC 3322 FC 3321 FC 3300 FC 3305

FibreChannelports42211

Optical interface SW, LC, SFP SW, LC, SFP SW, LC, SFF Fixed SW LC

Copper interface HSSDC

Max. transfer rate 400 MB/sec per

channel

400 MB/sec

per channel

400 MB/sec per

channel

400 MB/sec 400 MB/sec

Class transfers

2, 3 2, 3 2, 3 2, 3 2, 3

Full duplex

77777

66/33 MHz PCI

compatible

66 MHz only

7777

133 MHz PCI-X

compatible

64- and 32-bit PCI

compatible

64-bit only

7777

Windows

XP/2000/NT

77777

Windows Server 2003

77777

Solaris/Linux

Linux Linux

Mac OS X

Mac OSX

Mac OS 9

RAID support

Mac OSX

Maximum cable length 300m @ 2-Gb

500m @ 1-Gb

300m @ 2-Gb

500m @ 1-Gb

300m @ 2-Gb

500m @ 1-Gb

300m @ 2-Gb

500m @ 1-Gb

25 m

(175m with

MIA)

ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual

2 Fibre Channel is a key technology for storage

Fibre Channel is a serial communications technology designed to transfer large amounts of data among

a variety of hardware systems over long distances. It is a key technology for applications that require

shared, high bandwidth access to storage.

Fibre Channel provides a logical, point-to-point,

serial channel for the transfer of data between a

buffer at a source device and a buffer at a

destination device. It moves buffer contents from

one port to another, without regard to the format

or meaning of the data so different upper level

protocols are able to run over Fibre Channel

hardware.

The Fibre Channel architecture is structured as a

hierarchical set of protocol layers. Defined within

these layers are rules for signal interfaces, serial

encoding and decoding, error control, frame

format and communications protocols.

ATTO ExpressPCI Fibre Channel host adapters

carry SCSI protocol over Fibre Channel.

Glossary

Some terms used in the Fibre Channel industry are defined below. More information is available

through the ATTO Technology website

(www.attotech.com)

, the Fibre Channel Industry Association

(www.fibrechannel.com)

, Cern (

www.cern.ch)

, the Storage Area Networking Industry Association

(www.snia.org)

, and the Fibre Channel Consortium (

www.iol.unh.edu/consortiums, click on FC)

Term Definition

ANSI American National Standards Institute

arbitrate process of selecting one L_Port from a collection of ports which ask for use of the arbitrated loop

at the same time

arbitrated loop a loop topology (FC-AL) in which two or more ports are interconnected, but only two ports can

communicate at one time; low-cost solution which may or may not use hubs and switches

auto negotiation hardware senses and automatically responds depending on configuration

BER Bit Error Rate: a measure of transmission accuracy; the ratio of bits received in error to bits sent

bit Smallest unit of data a computer can process: a single binary digit with a value of either 0 or 1

bus a collection of unbroken signal lines used to transmit information from one part of a computer

system to another; taps on the lines connect devices to the bus

Byte an ordered set of 8 bits

channel a point-to-point link which transports data from one point to another

CPU Central Processing Unit: the portion of the computer that actually performs computations

CRC Cyclic Redundancy Check: an error-correcting code which calculates a numeric value for received

and transmitted data; if no error has occurred during transmission, the CRC for both received and

transmitted data should be the same

destination

address

a value in the frame header of each frame which identifies the port in the node where the frame is

being sent

device driver a program that allows a microprocessor to direct the operation of a peripheral device

DMA Direct Memory Access: a way to move data from a storage device directly to RAM without using

the CPU’s resources

DMA bus master Allows a peripheral to control the flow of data to and from system memory by block as opposed to

allowing the processor to control the data by bytes (PIO or programmed I/O)

Andere Handbücher für ATTO ExpressPCI FC 3321

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ATTO Technology Hostadapter Handbücher

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3300 Handbuch

ATTO Technology

ATTO Technology Celerity FC-82EN Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-42XS Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-82EN Bedienungsanleitung

ATTO Technology

ATTO Technology Low Profile SAS Host Adapter H380 Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-42ES Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-41XS Bedienungsanleitung

ATTO Technology

ATTO Technology R348 v Bedienungsanleitung

ATTO Technology

ATTO Technology R30F Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI Ultra/WIDE SCSI Host Adapters Express PCI PSC: Single-Channel Single-Ended Ultra/WIDE ExpressPCI DC:... Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-41EL Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3321 Bedienungsanleitung

ATTO Technology

ATTO Technology Low-Profile SAS Host Adapter H308 Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3322 Handbuch

ATTO Technology

ATTO Technology Celerity FC-41EL Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-41EL Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-164E Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressSAS R608 RAID Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-84EN Bedienungsanleitung

ATTO Technology

ATTO Technology R30F Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-84EN Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressSAS H1208 HBA Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressPCI UL5D LP Bedienungsanleitung

Beliebte Hostadapter Handbücher anderer Marken

Digital Equipment

Digital Equipment StorageWorks EK-KZPCM-UG Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun StorEdge Bedienungsanleitung

LSI

LSI LSI21320-R Bedienungsanleitung

LSI

LSI Ultra160 Bedienungsanleitung

Tekram Technology

Tekram Technology TR-824 Bedienungsanleitung

LSI

LSI S14037 Bedienungsanleitung

Sonnet

Sonnet Tempo Ultra ATA66 Bedienungsanleitung

Adaptec

Adaptec AHA-3940UW/OF Bedienungsanleitung

HighPoint

HighPoint RocketRAID 600L Bedienungsanleitung

Tekram Technology

Tekram Technology DC-820B Bedienungsanleitung

HighPoint

HighPoint RocketRAID 174x Bedienungsanleitung

Adaptec

Adaptec AHA-2944UW Bedienungsanleitung

IBM

IBM System Storage DS4000 Bedienungsanleitung

HP A8002A Gebrauchsanweisung

Yealink

Yealink VC400 Bedienungsanleitung

Sans Digital

Sans Digital HA-SAN-4ESPCIE Bedienungsanleitung

Adaptec

Adaptec AHA-2740 Bedienungsanleitung

Adaptec

Adaptec AHA-1540CP Bedienungsanleitung