ATTO Technology UL4D PCI Bedienungsanleitung

Installation and Operation Manual

ATTO ExpressPCI UL4S

Single Channel Ultra320 SCSI, PCI-X Host Adapter

ATTO ExpressPCI UL4D

Dual Channel Ultra320 SCSI, PCI-X Host Adapter

ATTO ExpressPCI UL5D

Dual Channel Ultra320 SCSI, PCI Express Host Adapter

ATTO ExpressPCI UL5D LP

Dual Channel Ultra320 SCSI, Low-Profile PCIe Host Adapter

respective holders. No part of this manual may be reproduced in any form or by any means without the

express written permission of ATTO Technology, Inc.

7/2007 Document Control Number: PRMA-0325-000MD

ATTO Technology Inc.

Contents

1 SCSI is a key technology for storage 1

SCSI advantages

Glossary

2 ATTO ExpressPCI Ultra320 SCSI solutions 3

Ultra 320 SCSI features

Common features

UL4D, UL4S specific features

UL4D Host Adapter specific features

UL4S Host Adapter specific features

UL5D, UL5D LP Host Adapter specific features

UL5D Host Adapter specific features

UL5D LP Host Adapter specific features

SCSI host adapter selection guide

3 Hardware installation 5

System requirements

Installation

3.1 Cabling and termination ......................................................7

Setting up cables and termination

4 Installing drivers 9

5 Updating hardware flash 10

Use the ATTO Configuration Tool

Use the ExpressPCI BIOS Setup Utility

Appendix A Standards and compliances ............................................i

FCC standards: radio and television interference

Canadian standards

European standards

Declaration of Conformity

Appendix B ATTO product guide .........................................................ii

SCSI adapter selection guide

SAS selection guide

Celerity FC adapter selection guide

Appendix C Safety, warranty, contacts ...............................................v

Safety

Installation

Operation

ATTO Technology, Inc. limited warranty

Contact ATTO Technology, Inc.

ATTO Technology Inc. ExpressPCI Host Adapter Installation and Operation Manual

1 SCSI is a key technology for storage

Ultra320 SCSI represents the seventh generation of SCSI technology, an I/O interface that increases

performance while maintaining backward compatibility and legacy support.

From its roots in 5 MB/sec. transfer rates, SCSI

has evolved as the leading interface for disk drive

connections in high performance servers. It

features maximum data transfer rates of 320

MB/second, full backward compatibility with

older versions of SCSI protocols and additional

features to improve performance and reliability.

Ultra320 is a powerful storage technology. All

forms of digital content, from e-mail, video, film,

and audio, to streaming video, and imaging, are

driving the unprecedented growth in storage that

pushes the I/O bandwidth, requiring more

advanced interfaces to handle data transfer.

SCSI advantages

• Backward compatible with older versions of

SCSI. Newer adapters will negotiate to the

lower speeds of legacy devices.

• Minimal investment to upgrade technology.

Older equipment may still be used with newer

equipment. Upgrade does not require

replacement of infrastructure.

Exhibit 1-1 How SCSI has evolved.

Glossary

Some terms used in the storage industry are defined below. More information is available through the

ATTO Technology website (

www.attotech.com

) and the SCSI Trade Association (

www.scsita.org

Narrow Fast/

Narrow Ultra Ultra/WIDE Ultra2 Ultra160 Ultra320

Data transfer

rates

<5 MB/sec 10 MB/sec 20 MB/sec 40 MB/sec 80 MB/sec 160 MB/sec 320 MB/sec

SCSI protocol SCSI-1 SCSI-2 SCSI-3 SCSI-3 SCSI-3 SCSI-3 SCSI-3

Specification SPI-1 SPI-1 SPI-1 SPI-1 SPI-2 SPI-3 SPI-4

Transfer type Single-

Ended

Single-

Ended HVD

Single-

Ended HVD

Single-

Ended HVD

LVD LVD LVD

Term Definition

ANSI American National Standards Institute

Asynchronous

Information

Protection

AIP: although most Ultra320traffic is sent synchronously and protected by CRC, some

information is still sent asynchronously. AIP implements CRC-level error checking on

asynchronous traffic ensuring end-to-end data integrity.

bit Smallest unit of data a computer can process: a single binary digit with a value of either 0 or 1

byte an ordered set of 8 bits

CRC Cyclic Redundancy Checking, an error-correcting code which calculates a numeric value for

received and transmitted data. If no error has occurred during transmission, the CRC for both

received and transmitted data should be the same.

destination address A value in the frame header of each frame which identifies the port in the node where the

frame is being sent

domain validation Before sending data, domain validation verifies that the physical connection is capable of

handling the negotiated transfer speed. If the system determines that Ultra320speeds are not

feasible, a slower speed is enforced.

SCSI is a key technology for storage

double transition

clocking

Increases the data line frequency to equal that of the request signal, allowing sampling on

both the leading and trailing edges of the request signal. Clocking can be set to ensure

compatibility with legacy devices.

flow control The target indicates to the initiator when the last packet of a data stream will be transferred so

that the initiator can flush FIFOs and terminate pre-fetch sooner than previously possible.

Basically, the target warns the initiator that the transfer is almost complete so that it can

prepare for the next transfer while the target completes the current transfer.

host A processor, usually a CPU and memory, which communicates with devices over an interface

HVD High voltage differential: uses two wires, transmitting a signal on one and its inverse on the

other. At the receiving end, the difference between the two signals is measured and

interpreted. Noise on the bus will affect both the signal and its inverse equally, so the

difference between the two lines will remain the same and the noise cannot be misread as a

signal.

initiator device A component which originates a command

LED Light-emitting diode: a type of diode that emits light when current passes through it. Visible

LEDs are used as indicator lights on all sorts of electronic devices.

LVD Low voltage differential. SCSI signalling method that combines the benefits of HVD and

single-ended technologies, allowing longer cabling configurations while consuming less

power than HVD technology.

originator An initiating device; a component which originates a command

packetization Creates information units (IUs) from commands, data, status information, etc. which are

passed as synchronous transfers. Maximizes bus use, minimizes command overhead and

allows multiple commands to be transferred in a single connection

pre-compensation Although SCSI transfer speeds have changed dramatically over the past several generations,

cable specifications have remained constant. Higher speed and frequency signals have a

greater potential for reflection and distortion over distance. Pre-compensation techniques

slightly modify the SCSI signal to reduce the chance of these types of problems.

Quick Arbitration

Select (QAS)

Arbitration

The process of devices negotiating for control of the bus with built-in “quiet times” so that fast

and legacy devices have an opportunity to take control of the bus. A fair, but somewhat

inefficient process, QAS speeds up the arbitration process by eliminating the bus free phase.

When combined with packetization, reduces command overhead and maximizes bus use.

read and write data

streaming

Minimizes data transfer overhead by allowing a target to send one data stream (LQ) packet

followed by multiple data packets. Minimizes overhead of data transfers because the target

can send one data stream packet followed by multiple data packets

receiver The ultimate destination of data transmission; a terminal device

SCSI Small Computer Systems Interface: a processor-independent standard for system-level

interface between a computer and intelligent devices including hard disks, floppy disks, CD-

ROM, printers, scanners, etc.

single-ended An electrical signal protocol that transmits information through changes in voltage. Single-

ended SCSI uses standard TTL signal and ground pairs to transmit information over the SCSI

bus.

training pattern SCSI is a parallel bus technology that is dependent on signals being transmitted on parallel

wires simultaneously. At higher speeds, minute differences in wire lengths and transmission

characteristics could cause problems. Training pattern testing measures these minute

differences and compensates for them.

Vpath™ Technology The ATTO ExpressPCI UL4S with Vpath Technology offers data transfer rates of 320

MB/sec. With one external connector and one internal connector, Vpath Technology allows

both faster and slower devices to run without impacting the speed of faster devices.

Term Definition

ATTO Technology Inc. ExpressPCI Host Adapter Installation and Operation Manual

2 ATTO ExpressPCI Ultra320 SCSI solutions

The Ultra320 SCSI Host Adapter represents the seventh generation of SCSI technology, an I/O interface

that is committed to increased performance while maintaining backward compatibility and legacy

support. The ATTO ExpressPCI UL4S Host Adapter is a single channel Ultra320 SCSI, PCI-X host

adapter, the ATTO ExpressPCI UL4D Host Adapter is a dual channel Ultra320 SCSI, PCI-X host

adapter, and the ATTO ExpressPCI UL5D and UL5D LP are dual channel Ultra 320 SCSI PCI Express

(PCIe) host adapters.

Today’s computing applications continue to

strain the host PCI bus and storage subsystem. To

bring better performance and reliability to today’s

professional applications, the ATTO ExpressPCI

UL4D and UL4S adapters deliver up to 640

MB/sec. data throughput, and take advantage of

the PCI-X bus interface while the ExpressPCI

UL5D delivers data throughput rates of up to 640

MB/sec. using the latest in PCI bus technology,

PCIe. ATTO ExpressPCI UL4D, UL4S, UL5D

and UL5D LP adapters deliver the high

bandwidth demanded in data-intensive

environments such as real-time and high-

definition video editing, web server and database

engines.

To maximize your attached storage, you may

wish to use RAID, a storage system using

multiple disk drives to improve storage

productivity and efficiency. Instead of using the

RAID functionality built into Windows® OS, use

the ATTO Express PowerCenter Utility for the

most efficient performance.

Contact your ATTO representative for more

information.

Ultra 320 SCSI features

• Double Transition Clocking

• Domain Validation

• Cyclic Redundancy Check (CRC)

• Packetization

• Quick Arbitration Select (QAS)

• Free-Running Clock

• Read and Write Data Streaming

• Flow Control

• Training Pattern

• Pre-Compensation

• Asynchronous Information Protection (AIP)

Common features

• Supports data transfer speeds of up to 320

MB/sec. per channel

• Supports Ultra320 Specifications including:

• Packetized SCSI

• Double transition clocking

• Quick Arbitration Select (QAS)

• Cyclical Redundancy Checking (CRC)

• Domain Validation (DV)

• Asynchronous Information Protection (AIP)

• Free-running clock

• Flow control

• Advanced Data Streaming (ADS™) provides

controlled acceleration of data transfers.

• Embedded RISC processor for low

overhead

• Bus mastering eliminates CPU processing

time as a bottleneck

• Tagged command queuing allows threads to

be processed efficiently

• Disconnect/reconnect eliminates wait time

between transfers

• Optimized scatter/gather lists

• Backward compatible with legacy SCSI devices

• ASPI (Windows) compatible

• Automatic and upper-byte termination

• Flash ROM for easy field upgrades

• RAID ready

• Environment and physical specifications

• Operating temperature: 0-45oC

• Humidity: 10-90% non-condensing

• Airflow: 100 LFM (min.)

• Reliability

• MTBF: 150,000 hours

• MTTR: <15 minutes

UL4D, UL4S specific features

• Accelerated PCI bus management

• PCI Bus Master rate of 1-GB/sec.

• PCI-X 1.0a compliant

• PCI 2.2 compliant

ATTO ExpressPCI Ultra320 SCSI solutions

• 64-bit/133 Mhz PCI-X (backward compatible

with standard PCI)

• Power

• 0.75 typical/2.0 max. Amps @ + 5.0 /VDC

• 0.05 Amps @ + 12.0 VDC

UL4D Host Adapter specific features

• Two external VHDCI and two internal high-

density 68-pin connectors

• Supports up to 30 SCSI bus IDs (15 per channel)

• Dimensions

• Length: 6.521”

• Height: 4.450”

UL4S Host Adapter specific features

• One external high-density 68-pin connector and

one internal high-density 68-pin connector

• Dimensions

• Length: 6.521”

• Height: 4.200”

UL5D, UL5D LP Host Adapter specific

features

• Supports up to 30 SCSI bus IDs (15 per channel)

• PCI Express (PCIe) bus management

• PCI Bus master rate 2-GB/sec.

• PCI Express 1.0b compliant

UL5D Host Adapter specific features

• Two external VHDCI and two internal high-

density connectors.

• Dimensions

• Length: 7.5”

• Height: 4.376 “

• Power

• 1.61 typical/2.03 max. Amps @ +3.3 VDC

• 0.65 typical/1.46 Amps @ + 12.0 VDC

UL5D LP Host Adapter specific features

• Dual stacked external VHDCI connectors.

• Dimensions

• Length: 6.6”

• Height: 2.713”

• Power

• 0.55 typical/0.9 max. Amps @ +3.3 VDC

• 0.56 typical/0.59 max. Amps @ + 12.0 VDC

• Low-profile bracket available

SCSI host adapter selection guide

Single Channel Dual Channel-- 2 independent channels

ExpressPCI Ultra 320 ExpressPCI Ultra 320 ExpressPCI Ultra 320

Max. transfer rate 320 MB/sec 640 MB/sec 640 MB/sec

LVD •••

64-bit (PCI) ••

32-bit (PCI) ••

33 MHZ (PCI) ••

133 MHZ (PCI-X) ••

x4 PCIe •

Bus ID support 30 30 30

Part number EPCI-UL4S EPCI-UL5D EPCI-UL5D LP EPCI-UL4D

ATTO Technology Inc. ExpressPCI Host Adapter Installation and Operation Manual

3 Hardware installation

Install the ATTO ExpressPCI Ultra320 Host Adapter and attach your SCSI devices to it using the

instructions below. To get the best performance from your ATTO Express Ultra320 host adapters, use

Ultra 320 SCSI devices.

CAUTIONCAUTION

Remember to back up your system data

before changing or installing hardware.

System requirements

The ATTO ExpressPCI host adapter package

contains the host adapter, the ATTO ExpressPCI

CD and a warranty and registration card. If any

items are missing, contact your ATTO authorized

sales representative.

To install and use the ATTO ExpressPCI UL4D

and UL4S SCSI adapters you need:

• A computer with an available 64-bit PCI-X

expansion slot (preferred) or a standard 32- or

64-bit PCI expansion slot.

• The complete ATTO ExpressPCI SCSI host

adapter package.

To install and use the ATTO ExpressPCI UL5D

and ExpressPCI UL5D LP you will need

• A computer with an available x4 PCIe expansion

slot or larger, such as x8 or x16.

• The complete ATTO ExpressPCI SCSI host

adapter package.

CAUTIONCAUTION

ATTO ExpressPCI host adapters contain

components that are sensitive to

electrostatic discharge (ESD). ESD can

cause damage to the ExpressPCI host

adapter. Please follow standard methods

to avoid ESD.

Installation

Remember to back up your system data before

changing or installing hardware.

1 Plan your SCSI device connections.

If connecting both internal and external devices

to the ATTO ExpressPCI SCSI adapter, be sure

to have the appropriate cables to connect

devices.

2 Set SCSI device termination. Devices at both

ends of the SCSI bus must be terminated.

Devices in the middle of the bus, including the

ATTO ExpressPCI adapter, must have

termination removed or disabled. ATTO

ExpressPCI SCSI adapters select the proper

termination if left in auto termination mode.

3 Set SCSI IDs. Each device on the SCSI bus

requires a unique SCSI ID, one different from

the host adapter ID. The default setting for the

ATTO ExpressPCI adapter is 7.

If you need to change this setting, refer to the

ATTO Utilities Installation and Operation

manual. Also refer to your SCSI device

documentation to determine the current SCSI

ID and how to change it. Wide (16-bit) SCSI

devices can be assigned IDs 0 to 7 and 8 to 15,

while Narrow (8-bit) devices can only be

assigned IDs ranging from 0 to 7.

4 Review system documentation to select an

appropriate slot to install your adapter. The

combined power consumption of the expansion

slots must not exceed the limits for your

system. If you have more than one expansion

card installed, ensure power consumption is

within the limits outlined for your system.

5 Power down the computer and unplug the

computer from all power sources.

6 Open the case.

7Install the adapter in any open PCI expansion

slot. Consult your computer’s documentation if

you have questions about how to install an

expansion card in your system.

8 Connect SCSI devices by inserting a SCSI

cable to the connector on the ATTO

ExpressPCI host adapter until you hear a click.

Refer to Chapter 3.1 when selecting cables.

9 Close the computer case and power it up.

ATTO ExpressPCI host adapters come

preconfigured to operate properly in a variety of

common system setups. However, some systems

may benefit by tuning the adapter for optimal

performance. Refer to the

ATTO Utilities

Installation and Operation

manual for more

information on changing host adapter settings

Andere Handbücher für UL4D PCI

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ATTO Technology Hostadapter Handbücher

ATTO Technology

ATTO Technology UL4D PCI Handbuch

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3342 Bedienungsanleitung

ATTO Technology

ATTO Technology R30F Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 2600 Handbuch

ATTO Technology

ATTO Technology UL5D PCI Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-41EL Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-84EN Bedienungsanleitung

ATTO Technology

ATTO Technology iPBridge 2600 Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-42ES Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-84EN Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-44ES Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressSAS H1208 HBA Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-21PS Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressSAS H1208 HBA Bedienungsanleitung

ATTO Technology

ATTO Technology UL3D Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3321 Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3300 Handbuch

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressPCI UL4S Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-41EL Bedienungsanleitung

ATTO Technology

ATTO Technology Celerity FC-84EN Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Bedienungsanleitung

ATTO Technology

ATTO Technology R30F Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-41XS Bedienungsanleitung

Beliebte Hostadapter Handbücher anderer Marken

Digital Equipment

Digital Equipment StorageWorks EK-KZPCM-UG Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun StorEdge Bedienungsanleitung

LSI

LSI LSI21320-R Bedienungsanleitung

LSI

LSI Ultra160 Bedienungsanleitung

Tekram Technology

Tekram Technology TR-824 Bedienungsanleitung

LSI

LSI S14037 Bedienungsanleitung

Sonnet

Sonnet Tempo Ultra ATA66 Bedienungsanleitung

Adaptec

Adaptec AHA-3940UW/OF Bedienungsanleitung

HighPoint

HighPoint RocketRAID 600L Bedienungsanleitung

Tekram Technology

Tekram Technology DC-820B Bedienungsanleitung

HighPoint

HighPoint RocketRAID 174x Bedienungsanleitung

Adaptec

Adaptec AHA-2944UW Bedienungsanleitung

IBM

IBM System Storage DS4000 Bedienungsanleitung

HP A8002A Gebrauchsanweisung

Yealink

Yealink VC400 Bedienungsanleitung

Sans Digital

Sans Digital HA-SAN-4ESPCIE Bedienungsanleitung

Adaptec

Adaptec AHA-2740 Bedienungsanleitung

Adaptec

Adaptec AHA-1540CP Bedienungsanleitung