AUDAC AMP523 Bedienungsanleitung

AMP523 Commands user manual

Index

Introduction 2

Input list 2

Using the commands 4

SV01 Set Master Volume 4

SVU01 Set Master Volume Up 3dB 4

SVD01 Set Master Volume Down 3dB 4

SVL set Volume WLI input 4

SVM Set Volume Mic/WMI input 5

GSA Get all main screen settings 5

SR01 Set Routing 5

SRU01 Set Routing Up 6

SRD01 Set Routing Down 6

SB01 Set Bass 6

ST01 Set Treble 6

SM01 Set Mute 7

SAVE SAVE Volume/Routing settings 7

DEF Load factory settings 7

GSV Get Software Version 7

Introduction

Welcome to the command user manual of the AUDAC AMP523 . For more info about the

AMP523 see the AMP523 manual.

Input list

1 Line 1

2 Line 2

3 Line 3

4 Line 4

5 WLI-WMI/MIC

Using the commands

The AMP523 has three communication ports which all accept the same commands:

RS232 port

RS485 ports

TCP/IP

The RS232/RS485 ports must be configured with 19200 baud, 8 data bits, 1 stop bit, no parity

The TCP/IP port accepts command’s at port 5001. The AMP523 accepts maximum 3 simultaneous

TCP/IP connections.

Command overview

Example: Set volume X001 zone 1 to -30dB

ASCII #|X001|F001|SV01|30|58ab|return

Important

- The address of the AMP523 is fixed at X001.

- The checksum is CRC-16 excluding the ‘#’. You can replace the checksum with ‘U’, this is

always accepted as checksum.

- return = 0x0d 0x0a

Command flow

1) The client sends a command to the AMP523

2) The AMP523 acknowledges the command by returning the same command and a ‘+’ as

Argument.

3) The AMP523 updates all client’s with the new information

All volume, routing and tone settings will be lost if the device is switched off. To keep the changes

you must save them with the “SAVE” command. All device settings that are configured through the

configuration page of the website are saved with every change automatically.

SV01

Set output volume to a level

Command: SV01,

Arguments: Volume in neg dB, 0 is maximum volume, 80 is minimum volume

Example

Set volume in zone 2 to -30dB

Command #|X001|F001|SV01|30|58ab|return

Answer #|F001|X001|SV01|+|ead6|return

Update #|ALL|X001|V01|30|aa95|return

SVU01

Set volume up with 3dB

Command: SVU01,

Arguments: 0

Example

Current is Volume -30dB, set volume up with 3dB

Command #|X001|F001|SVU01|0|d6b9|return

Answer #|F001|X001|SVU01|+|c6c6|return

Update #|ALL|X001|V01|27|5ac6|return

SVD01

Set volume down with 3dB

Command: SVD01

Arguments: 0

Example

Current volume is -27dB, set volume down with 3dB

Command #|X001|F001|SVD01|0|97ba|return

Answer #|F001|X001|SVD01|+|87c57|return

Update #|ALL|X001|V01|30|aa95|return

SVL

Set volume WLI input

Command: SVL

Arguments: Volume in neg dB, 0 is maximum volume, 80 is minimum volume

Example

Set WLI volume to -20 dB

Command #|X001|F001|SVL|20|9f85|return

Answer #|F001|X001|SVL|+|deed|return

Update #|ALL|X001|VL|20|20c3|return

SVM

Set volume Mic/WMI input

Command: SVM

Arguments: Volume in neg dB, 0 is maximum volume, 80 is minimum volume

Example

Set Mic/WMI volume to -30dB

Command #|X001|F001|SVM|30|9fe9|return

Answer #|F001|X001|SVM|+|22ec|return

Update #|ALL|X001|VM|30|20af|return

GSA

Get website main screen settings

Command: GSA

Arguments: 0

Example

Get all settings from main screen

Command #|X001|F001|GSA|0|6964|return

Answer #|F001|X001|SA|0^0^1^30^0^7^7|5f17|return

Update none, nothing changed

Argument 1: WLI volume (0dB)

Argument 2: Mic/WMI volume (0dB)

Argument 1: Routing ( input 1)

Argument 1: Output volume (-30dB)

Argument 1: Mute (Mute disabled)

Argument 1: Bass (0dB)

Argument 1: Treble (0dB)

SR01

Set routing (select input)

Command: SR01

Arguments: input

Example

Select input 3

Command #|X001|F001|SR01|3|5aa2|return

Answer #|F001|X001|SR01|+|6ed74|return

Update #|ALL|X001|R01|3|e5e4|return

SRU01

Set Routing up

Command: SRU01

Arguments: 0

Example

Increase routing

Command #|X001|F001|SRU01|0|16fc|return

Answer #|F001|X001|SRU01|+|0683|return

Update #|ALL|X001|R01|5|45e7|return

SRD01

Set Routing down

Command: SRD01

Arguments: 0

Example

Decrease routing

Command #|X001|F001|SRD01|0|57 |return

Answer #|F001|X001|SRD01|+|4780 |return

Update #|ALL|X001|R01|4|d5e6 |return

SB01

Set bass

Command: SB01

Arguments: from 0 to 14. (from -14dB to +14dB with 7 = 0dB)

Example

Set bass to +2dB

Command #|X001|F001|SB01|8|faa7|return

Answer #|F001|X001|SB|+|1d2f|return

Update #|ALL|X001|B|8|ed58|return

ST01

Set treble

Command: ST01

Arguments: from 0 to 14. (from -14dB to +14dB with 7 = 0dB)

Example

Set treble to -4dB

Command #|X001|F001|ST01|5|9ca1|return

Answer #|F001|X001|ST01|+|08d7|return

Update #|ALL|X001|T01|5|23e7|return

SM01

Set mute state in a zone

Command: SMXX

Arguments: 0 (disable) or 1 (enable)

Example

Enable mute in zone 1

Command #|X001|F001|SM01|1|55a1|return

Answer #|F001|X001|SM01|+|01d5|return

Update #|ALL|X001|M01|1|eae7|return

SAVE

Save’s the current zone settings (routing, volume, bass, treble)

Command: SAVE

Arguments: 0

Example

Command #|X001|F001|SAVE|0|f1b3|return

Answer #|F001|X001|SAVE|+|35c6|return

Update none, nothing changed

DEF

All zone settings and device settings will be reset to factory default.

Command: DEF

Arguments: 0

Example

Command #|X001|F001|DEF|0|ed2c|return

Answer #|F001|X001|DEF|+|e268|return

Update none

GSV

Get the software version of the DSP board

Command: GSV

Arguments: 0

Example

Command #|X001|F001|GSV|0|dd61|return

Answer #|F001|X001|SV|V1.1|8663|return

Update none, nothing changed

Andere Handbücher für AMP523

Inhaltsverzeichnis

Andere AUDAC Verstärker Handbücher

AUDAC

AUDAC SMA Series Bedienungsanleitung

AUDAC

AUDAC SMQ Bedienungsanleitung

AUDAC

AUDAC PRE220 Bedienungsanleitung

AUDAC

AUDAC AMP22 Bedienungsanleitung

AUDAC

AUDAC PRE116 Bedienungsanleitung

AUDAC

AUDAC CAP412 Montage- und Bedienungsanleitung

AUDAC

AUDAC vc2200 Bedienungsanleitung

AUDAC

AUDAC Multi-functional SourceCon MFA208 Bedienungsanleitung

AUDAC

AUDAC SMA Montageanleitung

AUDAC

AUDAC PX110 Bedienungsanleitung

AUDAC

AUDAC DPA73 Montage- und Bedienungsanleitung

AUDAC

AUDAC CPA24 Montage- und Bedienungsanleitung

AUDAC

AUDAC SCP2 Series Bedienungsanleitung

AUDAC

AUDAC AMP20 MK2 Bedienungsanleitung

AUDAC

AUDAC AMP523MK2 Bedienungsanleitung

AUDAC

AUDAC AMP203 Montageanleitung

AUDAC

AUDAC CPA12 Montage- und Bedienungsanleitung

AUDAC

AUDAC M1 Montage- und Bedienungsanleitung

AUDAC

AUDAC COM12 Montage- und Bedienungsanleitung

AUDAC

AUDAC DPA74 Montage- und Bedienungsanleitung

AUDAC

AUDAC COM12 Mk2 Bedienungsanleitung

AUDAC

AUDAC EPA252 Bedienungsanleitung

AUDAC

AUDAC CEP Series Bedienungsanleitung

AUDAC

AUDAC SMA Series Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung