AUDAC ARES5A Bedienungsanleitung

User manual

audac.eu

ARES5A

ARES5A - User manual02

ADDITIONAL INFORMATION

This manual is put together with much care, and is as complete as could be on the publication date. However,

updates on the specications, functionality or software may have occurred since publication. To obtain the latest

version of both manual and software, please visit the Audac website @ www.audac.eu.

ARES5A - User manual 03

Table of contents

Introduction 05

Active speaker system � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 05

Precautions 06

Chapter 1 08

Connections and connectors � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 08

Chapter 2 09

Overview ARES5A: Rear � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 09

Overview ARES5: passive � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 010

Chapter 3 011

Placement and mounting � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 011

Technical specications 013

Notes 014

Notes 015

ARES5A - User manual04

ARES5A - User manual 05

Introduction

Active speaker system

The ARES5A is a 2-way active speaker system consisting of an active and passive unit to be linked witch each other.

It offers an easy and exible solution for a wide variation of applications, producing a clear and powerful sound.

The integrated amplier can deliver a power of 2 x 40 Watt and includes a stereo line input which is implemented

balanced and unbalanced, allowing convenient connection to any kind of audio source. Unbalanced audio sources

are connected through a 3.5 mm jack connector, while balanced sources can be connected to the terminal block

input connection allowing long signal runs without interference. A volume potentiometer allows the user to adjust

the level of loudness while the two-band tone control allows equalization of treble and bass. The auto-standby

mode reduces the power consumption when no input signal is detected. The active speaker includes an stereo

amplier module, also delivering the input signal to the passive unit.

A special designed bracket systems allows close to wall installation of the speakers, while the recessed bracket

structure guarantees an optimal cosmetic outlook of the system.

A remote input connection implemented trough an RJ45 connector allows wall panel connections, allowing

expansion of the system through remote input modules. A variation of optional remote input units with different

input possibilities is available.

ARES5A - User manual06

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY

ALWAYS HANDLE THIS UNIT WITH CARE

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH

LIQUID ON TOP OF THIS DEVICE

NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS

DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS ADEQUATE

VENTILATION TO COOL THE UNIT. DO NOT BLOCK THE VENTILATION OPENINGS.

DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS.

DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT

DO NOT PLACE THIS UNIT IN ENVIRONMENTS WHICH CONTAIN HIGH LEVELS OF DUST, HEAT, MOISTURE OR VIBRATION

THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK

ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER

UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME

ONLY CONNECT THIS UNIT TO A MAINS SOCKET OUTLET WITH PROTECTIVE EARTHING CONNECTION

THE MAINS PLUG OR APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, SO THE DISCONNECT DEVICE SHALL BE READILY

OPERABLE

USE THE APPARATUS ONLY IN MODERATE CLIMATES

CAUTION

The symbols shown are internationally recognized symbols that warn about potential hazards of electrical products.

The lightning ash with arrow point in an equilateral triangle means that the unit contains dangerous voltages. The

exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the users manual.

These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service

the unit yourself. Refer all servicing to qualied personnel. Opening the chassis for any reason will void the manufacturer’s

warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service.

Disconnect the unit during storms to prevent damage.

ARES5A - User manual 07

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing to qualied service personnel. Do

not perform any servicing (unless you are qualied to)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further relevant specications described

in following directives: 2014/30/EU (EMC) and 2014/35/EU (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be disposed with regular household waste

at the end of its life cycle. This regulation is created to prevent any possible harm to the environment

or human health.

This product is developed and manufactured with high quality materials and components which can be

recycled and/or reused. Please dispose this product at your local collection point or recycling centre for

electrical and electronic waste. This will make sure that it will be recycled in an environmentally friendly

manner, and will help to protect the environment in which we all live.

ARES5A - User manual08

Chapter 1

Connections and connectors

CONNECTION STANDARDS

The in- and output connections for AUDAC audio equipment are performed according to international wiring

standards for professional audio equipment

3-Pin Terminal block:

For unbalanced line input connections

For balanced signal input connections For balanced signal input connections

3.5 mm jack:

For unbalanced line input connections

RJ45 (Audio, +24V DC)

Remote input units

Left:

Center:

Right:

Tip:

Ring:

Sleeve:

Signal -

Signal +

Ground

Left

Right

Ground

(XLR Pin 3)

(XLR Pin 2)

(XLR Pin 1)

Pin 1 White-Orange Left channel +

Pin 2 Orange Left channel -

Pin 3 White-Green +24V DC

Pin 4 Blue Not connected

Pin 5 White-Blue Not connected

Pin 6 Green GND

Pin 7 White-Brown Right channel +

Pin 8 Brown Right channel -

ARES5A - User manual 09

Chapter 2

Overview ARES5A: Rear

1) Volume control

This button controls the general volume of the speaker

system.

2) Treble control

This button allows you to increase or decrease the high

frequencies by 12 dB. By adding high frequencies, the

intelligibility can be improved. In the center position, the

sound is neutral. You can adjust it to the desired level.

CAUTION: To reduce risk of fire or electrical

shock, do not expose this unit to rain or

moisture

ATTENTION: Pour réduire les risques

d’incendie ou d’électrocution, ne pas

exposer cet appareil à la pluie ou à l’humidité

ARES5A - User manual010

3) Bass control:

By adding bass, you can add warmth to your music.

Decreasing bass can improve the intelligibility of spoken

messages, certainly in reverberant rooms. These values

can be increased or decreased by 12 dB

4) Unbalanced line input 3.5mm:

The audio source from a portable device like a laptop,

a phone, … can be connected to this unbalanced line

input. The applied signal should be a line-level signal.

6) Remote connector:

Remote input units can be connected to this RJ45 input

connector. For more information about compatible devices

and further information about pinouts, cable runs and

technical possibilities, check additional documentation on

our websites or from the optional accessories.

5) Balanced line input:

These inputs can be used when connecting source

devices with a balanced output signal. The balanced

input connections are performed using three-pin

Terminal block connectors. Balanced signals are less

sensitive for interference caused by external devices.

For this reason is balanced wiring recommended when

using long cable runs between the source device and

the speakers, or when installed in areas where a lot of

interference occurs.

7) Stereo/mono switch:

The operation mode can be switched between mono

and stereo mode with this switch. When the speaker is

used in mono mode, the input signal applied to the left

input signal will be fed to the amplier.

8) Standby switch:

In normal operation, the speaker switches to standby

mode after ~20 minutes of inactivity (no signal detection).

It automatically wakes-up in presence of an input signal.

This switch allows to enable & disable the auto standby

mode in situations where this behavior is not desirable.

When switched ON, the power LED illuminates in blue

color, while orange when switched to standby.

9) Speaker output:

This two pin terminal block connector should be used to

connect the supplied passive loudspeaker. Using other

loudspeakers can give bad results and even cause

damage to the main unit. Be sure that the polarity of

the speakers is correct.

10) Power supply socket:

The unit should be connected to the mains circuit by using

a standard IEC C7/C8 power cord.

Overview ARES5: passive

Terminal block connector

Inhaltsverzeichnis

Andere AUDAC Sprecher Handbücher

AUDAC

AUDAC MBK523/G Bedienungsanleitung

AUDAC

AUDAC ATEO2D Leitfaden

AUDAC

AUDAC CS75B Bedienungsanleitung

AUDAC

AUDAC HS208MK2 Leitfaden

AUDAC

AUDAC WX502B Montage- und Bedienungsanleitung

AUDAC

AUDAC WXMK2 Series Leitfaden

AUDAC

AUDAC CIRA506 Bedienungsanleitung

AUDAC

AUDAC KYRA24 Leitfaden

AUDAC

AUDAC VEXO208 Bedienungsanleitung

AUDAC

AUDAC MTX Bedienungsanleitung

AUDAC

AUDAC WX Series Leitfaden

AUDAC

AUDAC ALTI Series Leitfaden

AUDAC

AUDAC VIRO5 Bedienungsanleitung

AUDAC

AUDAC SPRING-FIT CENA812 Bedienungsanleitung

AUDAC

AUDAC WMM630 Bedienungsanleitung

AUDAC

AUDAC WS524 Bedienungsanleitung

AUDAC

AUDAC NELO706 Series Bedienungsanleitung

AUDAC

AUDAC Ateo 2 Leitfaden

AUDAC

AUDAC SPRING-FIT CENA Series Bedienungsanleitung

AUDAC

AUDAC CSE55 Montage- und Bedienungsanleitung

AUDAC

AUDAC LINO4 Leitfaden

AUDAC

AUDAC ATEO M Series Bedienungsanleitung

AUDAC

AUDAC VEXO1 A Series Bedienungsanleitung

AUDAC

AUDAC CELO2D Leitfaden

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung