AUDAC XENO 6 Leitfaden

XENO 6

User & Installation

Manual

www.audac.eu

Introduction

6” Full range loudspeaker cabinet

The XENO series is a loudspeaker range specifically designed for fixed audio installations

in modern environments, offering two different sizes of contemporary and elegant

designed products. What makes them so unique is their full-range audio design, allowing

them to be used without additional an bass cabinet.

The XENO 6 is the 6” version, equipped with a 1” dome tweeter and a 6” Mid / Low

frequency driver, ensuring a high-fidelity sound. This wooden cabinet is fitted with a

slim and elegant front grill.

This makes the loudspeaker suitable for different kinds of environments where the audio

system can be used to create an aesthetical and musical atmosphere.

This ranges from design interiors in residential applications to contemporary retail stores

and restaurants that require a clear background sound. But the XENO 6 also shines in

clubs and pubs were sound goes up when the sun goes down.

It delivers a powerful full-range sound with an RMS rating of 80 Watt, and a maximum

of 160 Watt. The advanced integrated protection circuit avoids the tweeter from suffering

damage in case of overload. The included mounting bracket makes it possible to mount

the loudspeaker in both horizontal and vertical position, making it suitable for every

application.

The connections can be made on the rear side of the loudspeaker with a Euro Terminal

Block connector.

All Xeno series speakers are available in Black (/B) or White (/W).

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER

THROW THEM AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• CLEAN ONLY WITH DRY CLOTH

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR

SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON

TOP OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS

OR OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST,

HEAT, MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY

SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE

SPEAKER DOWN.

• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE

SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL

DOWN

• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,

INFORM YOUR VENDOR IMMEDIATELY.

CAUTION

• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

• USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,

THINNER OR OTHER COMBUSTIBLES

• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING

THE LOUDSPEAKER

• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and

further relevant specifications described in following directives:

2004/108/EC (EMC) and 2006/95/EC (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular houshold waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose this product to your local collection point or

recycling centre for electrical and electronic waste. This will

make to sure that it will be recycled on an environmentally friendly

manner, and will help to protect the environment in which we all

live.

Installing the XENO

Revolving mounting bracket

Every XENO speaker is standard delivered with a two-way revolving bracket, making it

possible to install the speaker at each location and focusing it into the desired direction.

By using this bracket you can install the loudspeaker both in a horizontal and vertical way.

The vertical installation method provides an additional advantage when the installation

height on the wall or ceiling is limited by focussing the loudspeaker more directly downwards.

The two-way revolving bracket is made out of extra strong zinc-alloy material which

ensures a solid and secure mounting of the loudspeaker. One horizontal and one vertical

revolving point ensure easy focusing of the loudspeaker into any direction.

To realise an optimal installation, distribution of the forces on the revolving points and

freedom in focusing of the loudspeaker, it is recommended to install the swivel points of the

loudspeaker in a way that the revolving point on the wall plate is positioned in a horizontal

direction and the revolving point on the speaker plate is positioned in a vertical direction.

The speaker plate has to be be fixed to the loudspeaker cabinet by inserting the 4

supplied mounting screws into the pre-drilled and threaded holes at the back of the

speaker cabinet.

The wall plate has to be fixed to the wall by four screws. The fasteners that are

used, depend on the mounting surface (brick, concrete, wood, ...). The holes should

be provided in a quadrangular shape with a mutual distance of 45 mm, as shown in

following drawing:

Rotatable logo

Depending on the mounting direction of the loudspeaker (either horzontally or vertically),

the logo on the front grill of the loudspeaker that is held in place by a spring loaded

mechanism can be rotated into the direction the speaker is mounted.

By placing a flat object between the logo and the recessed surface in the grill and the

logo, the logo will move forward because of the spring loaded mechanism and can be

rotated into the right position.

Connecting

For connecting the XENO loudspeaker, the wires coming

from the amplifier have to be connected to the 4-pin

Terminal Block connector at the back of the unit. The

wires coming from the amplifier have to be connected to

the ‘In +’ and ‘In -’ terminals. The other two terminals

‘Out +’ and ‘Out -’ can be used for linking the signal

coming from the amplifier to other loudspeakers,

resulting in a parallel network of multiple loudspeakers.

Mind the polarity markings when wiring the loudspeaker cables.

AUDAC

XENO 6

Impedance : 8 Ohm

Power Handling : 80 W att

Serial no

In +

In -

Out +

Out -

www.AUDAC .eu

Additional Information

Technical specifications

RMS Power 80 Watt

Max. Power 160 Watt

Nominal impedance 8 Ohm

Sensitivity 1W / 1m 88 dB

Sound pressure Max W / 1m 110 dB

Frequency response -3 dB 65 Hz - 18 kHz

Frequency range -10 dB 55 Hz - 20 kHz

Cross-over frequency 2.5 kHz

Cross-over network Passive Built-in

Drivers 1” HF Dome tweeter

6” MF / LF woofer

Connectors 4-Pin Euro-Terminal Block (5.08 mm)

Mounting bracket 2-Way revolving Zinc-Alloy

Construction Medium density wood

with structured coating

Front finish Perforated steel grill

Colour XENO6/W White (RAL9003)

XENO6/B Black (RAL9004)

Dimensions 210 x 345 x 220 mm

Weight (Incl Bracket) 5.60 Kg

Packaging Carton box

Shipping weight & Volume 6.2 Kg - 0.0355 Cbm

Accessories included 4-Pin Euro-Terminal Block (5.08 mm)

2-Way revolving mounting bracket

Inhaltsverzeichnis

Andere AUDAC Sprecher Handbücher

AUDAC

AUDAC ASP20 Bedienungsanleitung

AUDAC

AUDAC AWP06 Bedienungsanleitung

AUDAC

AUDAC WXMK2 Series Leitfaden

AUDAC

AUDAC WMM630 Bedienungsanleitung

AUDAC

AUDAC MERO5 Leitfaden

AUDAC

AUDAC MERO6 Leitfaden

AUDAC

AUDAC SPRING-FIT CENA306 Bedienungsanleitung

AUDAC

AUDAC KYRA12/O Series Leitfaden

AUDAC

AUDAC WXMK2 Series Leitfaden

AUDAC

AUDAC WX802/W Montage- und Bedienungsanleitung

AUDAC

AUDAC LINO4 Leitfaden

AUDAC

AUDAC WS624 Bedienungsanleitung

AUDAC

AUDAC VEXO208 Bedienungsanleitung

AUDAC

AUDAC MTX Bedienungsanleitung

AUDAC

AUDAC CS75B Bedienungsanleitung

AUDAC

AUDAC NELO706 Series Bedienungsanleitung

AUDAC

AUDAC WX502B Montage- und Bedienungsanleitung

AUDAC

AUDAC CENA706 Bedienungsanleitung

AUDAC

AUDAC SPRING-FIT CENA506 Bedienungsanleitung

AUDAC

AUDAC BASO10/B Leitfaden

AUDAC

AUDAC CS75 Bedienungsanleitung

AUDAC

AUDAC Ateo 2 Leitfaden

AUDAC

AUDAC CS74 Bedienungsanleitung

AUDAC

AUDAC KYRA24 Leitfaden

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung