Audio-Techica AT-LP3XBT Bedienungsanleitung

AT-LP3XBT

Automatic Wireless Turntable

User Manual

English

Notes on use

Turntable body

Do not set and use the product in locations that are considerably hot or humid, dirty, or subject to extreme vibrations.

The product should be positioned on a flat, level surface.

When closing the dust cover, close it completely.

When using this product with a Bluetooth device connected to it, be sure to also read the user manual for the

Bluetooth device.

Cartridge

Attach the provided protector to the cartridge when the product is not in use.

Do not touch the stylus of the cartridge with your finger.

Do not allow the stylus to bump against the platter, felt mat, or edge of the record.

Package contents

Make sure that you have all the included items before using this product.

If some items are missing or damaged, contact your local Audio-Technica dealer.

After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping.

89 10

4 5

12 13

Turntable body

Platter

Drive belt

Dust cover

Felt mat

Dust cover hinges

Package contents

Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)

Counterweight

45 RPM adapter

AC Adapter

RCA audio cable (Approx. 1.0 m (3.3'))

Quick Start Guide

Caution Guide

Part names and functions

Top view

45 RPM adapter (shown in receptacle)

Select the platter speed (33-1/3 or 45 RPM).

Felt mat

Spindle

Drive belt

Motor pulley (brass-colored)

Bluetooth indicator LED

Indicates the Bluetooth connection status with solidly lit or flashing light.

Wireless function button

Use to connect this product to a Bluetooth device.

Platter

Tonearm

Size selector

Switch between 12" and 7", according to the size of the record.

Part names and functions

Front view

1 2 3

Platter speed button

Selects the platter speed (33-1/3 or 45 RPM).

START button

Spins the platter and moves the tonearm.

STOP button

Returns the tonearm to its original position and stops the platter.

Rear view

1 12 23 4 5 6

Dust cover hinge holders

Attachment points for dust cover hinges.

Feet

Adjust the level of the product.

Pre-amplifier selector switch

If connecting to an amplifier’s PHONO input jack, set this switch to the PHONO position. If connecting to the AUX

jack of an amplifier, set this switch to the LINE position.

Stereo output terminals

Connect the RCA audio cable. Connect it to either the amplifier’s PHONO input jack or its line input jack. The red

terminal is the right channel and the white terminal is the left channel.

Part names and functions

Ground (earth) terminal

Connect the amplifier’s ground (earth) terminal to this terminal using the RCA audio cable’s ground line.

Power input jack

Connect the AC adapter.

Tonearm

Counterweight

Balances the tonearm and adjusts to provide the proper tracking force.

Tracking force gauge ring

Use to adjust the tracking force.

Anti-skate control dial

While the record is playing, a force acts on the stylus tip to pull it inward. This force can be counteracted by setting

the same values for anti-skate and the tracking force.

Tonearm lift

Moves the tonearm vertically to and from the face of the record.

Part names and functions

Tonearm lift control lever

Operates the tonearm lift.

Tonearm rest

Tonearm

Locking ring

Rotate the ring to the left (counterclockwise) to secure the headshell. To remove the headshell, rotate the ring to the

right.

Headshell and cartridge

The cartridge is attached to the headshell.

Preparation for use

Setting up the turntable

Position the product on a level surface.

To avoid the effects of vibrations and acoustic pressure, do not mount the product next to such items as speakers.

The product may pick up radio static if placed next to a radio. Therefore, try to keep the product away from radios.

If the product is near equipment (cell phone, etc.) that emits strong radio waves, noise may occur.

Placing the platter and the felt mat

This product requires some assembly before using it for the first time. Do not connect the AC adapter until assembly is

complete.

1Set the platter on the spindle.

Make certain that the platter is fully seated on the spindle.

Align one of the openings with the position of the motor pulley (brass-colored) (See the diagram below).

To avoid damaging the spindle when seating the platter, align the positions of the spindle and the platter’s

hole, and then slowly seat the platter.

Motor pulley (brass-colored)

2Attach the drive belt to the motor pulley (brass-colored).

Align one of the platter openings with the brass motor pulley, and, while pulling both ends of the red ribbon

that comes attached to the belt, place the belt on the motor pulley, as per the diagram. When doing this, be

careful not to twist the belt.

Preparation for use

3Remove the red ribbon from the belt.

4Set the felt mat on the platter.

After setting the felt mat, put the 45 RPM adapter into the space made for it on the upper left.

45 RPM adapter

Inhaltsverzeichnis

Andere Audio-Techica Drehscheibe Handbücher

Audio-Techica

Audio-Techica AT-LPW50BT Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LPW50PB Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP140XP Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP120XBT-USB Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT-USB Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP1240-USBXP Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XHP Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60X Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP7 Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung

Bryston

Bryston BLP-1 Bedienungsanleitung