Audio Technica AT2020USB+ Bedienungsanleitung

AT2020USB+

Instruction Manual

AT2020USB+

Cardioid Condenser USB Microphone

Contents

Introduction & features 3

Setting up your microphone with pivot mount & desk stand 4

Preliminary setup with Mac OS X 5

Preliminary setup with Windows 7 7

Using headphones 10

Using mix control 10

Selecting software 10

Setting your software levels 10

Positioning your microphone 10

Protecting your microphone 10

Specifications 11

Compliance with FCC rules (USA only)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:(1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC WARNING

You are cautioned that any changes or modifications not expressly approved in this manual could

void your authority to operate this equipment.

Canada only

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme á la norme NMB -003 du Canada.

Federal Communications Commission Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

Thank you for buying the Audio-Technica AT2020USB+ Cardioid Condenser USB Microphone.

Equipped with a USB output, this microphone is designed for digitally capturing music or any acoustic

audio source using your favorite recording software. The AT2020USB+ offers studio-quality articulation

and intelligibility perfect for home studio recording, field recording, podcasting, and voiceover use.

The AT2020USB+ features a built-in headphone jack with volume control that allows you to directly

monitor your microphone signal with no delay. It also offers mix control that blends microphone and

pre-recorded audio. The microphone’s cardioid pickup pattern delivers excellent off-axis rejection,

while its A/D converter with a 16-bit, 44.1/48 kHz sampling rate ensures extremely articulate sound

reproduction.

Audio-Technica’s state-of-the-art design and manufacturing techniques ensure that the microphone

complies with the company’s renowned consistency and reliability standards.

Features

• Condenser microphone with USB output for digital recording

• High quality A/D and D/A converter with 16 bit, 44.1/48 kHz sampling rate for superb audio

• Headphone jack with volume control allows you to monitor the microphone signal with no delay

• Mix control allows you to blend your microphone signal and pre-recorded audio

• High-output internal headphone amplifier delivers superior clarity and musical detail as well as

more volume overall

• Smooth, extended frequency response ideally suited for podcasting, home studio recording,

field recording and voiceover use

• Compatible with Windows 7, Vista, XP, 2000 and Mac OS X

• Tripod desk stand with folding legs for secure and easily portable tabletop use

Introduction

1. Capsule — Condenser microphone element with cardioid polar pattern

2. Blue LED — Blue light shows microphone is receiving USB power

3. Headphone Level Control — Dial controls headphone volume

4. Mix Control — Blends microphone and pre-recorded audio

5. Headphone Jack — 1

/8-inch (3.5 mm) stereo jack for connecting your headphones

6. Metal Construction — Tough, durable, resilient design

7. USB Connector — Use the included USB cable to connect AT2020USB+ to your Mac or PC

8. USB Cable

Setting up your microphone with included pivot mount and tripod desk stand

A. Screw the pivot mount onto the top of the tripod desk stand.

B. Place the tripod desk stand on a flat surface. (The tripod legs will extend to provide a wide,

secure base.)

C. Install the AT2020USB+ microphone into the threaded collar of the pivot mount and tighten

collar while holding the microphone in place. The front of the microphone should be facing the

sound source. (A USB icon and blue LED indicate the front of the microphone; the product model

number is displayed on the rear of the microphone.)

D. If necessary, adjust the microphone’s angle with the pivot mount’s thumbscrew.

E. Plug the provided USB cable into the USB digital output at the base of the microphone.

Note: Many recording software programs are available online. Audacity is widely used free software

for recording and editing sounds. It is available online at http://audacity.sourceforge.net/

AT2020USB+

(on back)

1. Plug the free end of the provided USB cable into the USB port on your computer. The microphone’s

blue LED will illuminate, indicating the microphone is receiving power. Your computer will

automatically recognize the USB device and install a driver.

2. To select the AT2020USB+ as your audio input, first, open your System Preferences.

3. Next, click Sound to display the Sound preference pane.

Preliminary setup with Mac OS X

AT2020USB+ USB

4. Click the Input tab and select the AT2020USB+ as the device for sound input.

Preliminary setup with Mac OS X (continued)

5. Click the output tab and make certain AT2020USB+ is selected as the default output device.

(This should have happened automatically.)

Your preferences are now set to use the AT2020USB+ on your Mac with GarageBand or another

recording program of your choice.

AT2020USB+ USB

1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue

LED light will illuminate, indicating the mic is receiving power. Your computer will automatically

recognize the USB device and install a driver.

2. In the lower right portion of your screen you may get a message that new hardware was found;

or you may see a driver software installation notice.

3. Start menu > Control Panel > Sound

To select the AT2020USB+ as your default recording device, begin at your Start menu.

Select Control Panel.

Preliminary setup with Windows 7

Preliminary setup with Windows 7 (continued)

4. Select Sound.

5. The following screen will pop up:

6. Select the Recording tab, and choose AT2020USB+ as the default device.

7. Double click on the AT2020USB+ icon to open the Microphone Properties window. Select the

Levels tab to adjust microphone level (loudness). You may need to come back to this window to

readjust the level after you begin recording.

Your preferences are now set to use the AT2020USB+ with Windows 7 and the recording program of

your choice.

Microphone

AT2020USB+

Default Device

Additional Information

Using headphones

Warning: Turn the volume control down before using the headphones.

The 1

/8" (3.5 mm) headphone jack on the rear of the microphone allows you to directly monitor your

recording without the delay that occurs when monitoring through your computer’s headphone output.

When your preliminary setup is completed, and your USB microphone is connected to your computer’s

USB port (the microphone’s blue LED is illuminated), plug your headphones into the headphone jack

on the rear of the microphone. While talking into the microphone, you should hear yourself in the

headphones. (If Mix Control is set on COM you may not be able to hear yourself. Set Mix Control

between COM and MIC to assure you will be able to hear live audio through your headphones.)

Adjust the volume by rotating the Headphone Level Control dial on the front of the microphone.

Note: The Headphone Level Control dial only adjusts the volume of the mic’s headphone output; it

does not adjust the microphone level.

Note: The AT2020USB+ is equipped with a high-output internal headphone amplifier that provides

superior clarity and musical detail as well as more volume overall.

Using Mix Control

The AT2020USB+ allows you to monitor previously recorded tracks while recording new audio. Adjust

the Mix Control to balance levels of live audio from your microphone and pre-recorded audio on your

computer. Turn the Mix Control dial towards COM (computer) to hear more pre-recorded audio; turn

the dial towards MIC (microphone) to hear more of your voice or instrument in the mix.

Selecting software

You have many choices in recording software. Audacity, available for free online at

http://audacity.sourceforge.net/, is a widely used software program that provides basic recording software.

Setting your software levels

Correct adjustment of microphone level is important for optimum performance. Ideally, the microphone

level should be as high as possible without overloading the input of your computer. If you hear

distortion, or if your recording program shows levels that are consistently overloaded (at peak levels),

turn the microphone volume (or level) down, either through your control panel (or system preferences)

settings, or through your recording software. If your recording program shows insufficient level, you

can increase the microphone gain either from the control panel (or system preferences) settings or

through your recording program.

No further microphone level adjustments should be needed, as long as the acoustic input does not

change significantly.

Positioning your microphone

It is important to position the microphone directly in line (on axis) with the person speaking/ singing or

instrument (or other sound source) to achieve the best frequency response of the microphone.

For use in speaking/singing applications, the ideal placement for the microphone is directly in front of

the person speaking/singing. The same placement is optimal when miking an instrument such as an

acoustic guitar, drums or piano. Experiment with different mic placements to find the best sound for

your particular setup.

Protecting your microphone

Avoid leaving your microphone in the open sun or in areas where temperatures exceed 110° F (43° C)

for extended periods. Extremely high humidity should also be avoided.

Andere Handbücher für AT2020USB+

Inhaltsverzeichnis

Andere Audio Technica Mikrofon Handbücher

Audio Technica

Audio Technica ES964 Bedienungsanleitung

Audio Technica

Audio Technica ATM610 Bedienungsanleitung

Audio Technica

Audio Technica U853R Betriebsanleitung

Audio Technica

Audio Technica ES935SH6 Bedienungsanleitung

Audio Technica

Audio Technica Artist Elite AE5100 Bedienungsanleitung

Audio Technica

Audio Technica UniLine unipoint U857QMU Bedienungsanleitung

Audio Technica

Audio Technica ES961 Betriebsanleitung

Audio Technica

Audio Technica unipoint U857QLU Bedienungsanleitung

Audio Technica

Audio Technica ATR2100x-USB Bedienungsanleitung

Audio Technica

Audio Technica AT4050ST Installationsanleitung

Audio Technica

Audio Technica ES925C6/XLR Bedienungsanleitung

Audio Technica

Audio Technica unipoint U853AU Bedienungsanleitung

Audio Technica

Audio Technica AT815b Bedienungsanleitung

Audio Technica

Audio Technica AT4033a Bedienungsanleitung

Audio Technica

Audio Technica PRO 42 Installations- und Betriebshandbuch

Audio Technica

Audio Technica OMNIDIRECTIONAL DYNAMIC AT804 Bedienungsanleitung

Audio Technica

Audio Technica ATM450 Bedienungsanleitung

Audio Technica

Audio Technica Engineeredsound ES947C/TB3 Bedienungsanleitung

Audio Technica

Audio Technica Artist Series Bedienungsanleitung

Audio Technica

Audio Technica ES993 Betriebsanleitung

Audio Technica

Audio Technica AT831b Bedienungsanleitung

Audio Technica

Audio Technica AT835b Bedienungsanleitung

Audio Technica

Audio Technica MicroSet BP892 Bedienungsanleitung

Audio Technica

Audio Technica ATW-2110 Betriebsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung