Audio Technica ATM610 Bedienungsanleitung

• Tailored for extended-range, high-fidelity vocal reproduction

• Hypercardioid polar pattern reduces pickup of sounds from the

sides and rear, improving isolation of desired sound source

• Durable performance for professional applications

• Special dual-wall floating construction reduces handling noise and

assures consistent performance from mic to mic

• Hi-ENERGY®neodymium magnet for articulate vocal reproduction

• Multi-stage grille design offers excellent protection against plosives

and sibilance without compromising high-frequency clarity

•Quiet-Flex™stand clamp provides silent, flexible microphone

positioning

• Corrosion-resistant contacts from gold-plated XLRM-type

connector

• Rugged, all-metal design and construction for years of trouble-free

use

Output from the microphone's XLRM-type connector is low

impedance (Lo-Z) balanced. The signal appears across Pins 2 and

3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” – positive

acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be

wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance (Hi-Z)

mic input, connect a Lo-Z balanced cable to a Hi-Z matching

transformer (A-T CP8201 or equal) at the equipment input.

When using the ATM610 in settings with a stage monitor speaker,

the speaker should be located 135° off axis (45° off the rear of the

microphone). This placement, in conjunction with the microphone's

uniform hypercardioid pickup pattern, will virtually eliminate the

possibility of undesired audio feedback.

Take care to keep foreign particles from entering the windscreen. An

accumulation of iron or steel filings on the diaphragm, and/or foreign

material in the windscreen's mesh surface, can degrade

performance.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

www.audio-technica.com

ATM610

ATM610 SPECIFICATIONS†

ELEMENT Dynamic

POLAR PATTERN Hypercardioid

FREQUENCY RESPONSE 40-16,000 Hz

OPEN CIRCUIT SENSITIVITY –55 dB (1.7 mV) re 1V at 1 Pa*

IMPEDANCE 300 ohms

WEIGHT 280 g (9.9 oz)

DIMENSIONS 177.0 mm (6.97") long,

48.0 mm (1.89") diameter

OUTPUT CONNECTOR Integral 3-pin XLRM-type

ACCESSORIES FURNISHED AT8470 Quiet-Flex™stand clamp

for 5/8"-27 threaded stands;

5/8"-27 to 3/8"-16 threaded adapter;

soft protective pouch

†In the interest of standards development, A.T.U.S. offers full details on its test

methods to other industry professionals on request.

*1 Pascal = 10 dynes/cm2= 10 microbars = 94 dB SPL

Specifications are subject to change without notice.

HYPERCARDIOID DYNAMIC

VOCAL MICROPHONE

8 kHz

Polar Pattern

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

200 Hz

1 kHz

5 kHz

Frequency in Hertz

LEGEND 12" or more on axis

Frequency Response

Response in dB

Andere Audio Technica Mikrofon Handbücher

Audio Technica

Audio Technica ES917S Bedienungsanleitung

Audio Technica

Audio Technica AT835b Bedienungsanleitung

Audio Technica

Audio Technica UNIPOINT U857Q Bedienungsanleitung

Audio Technica

Audio Technica U841A Bedienungsanleitung

Audio Technica

Audio Technica Artist Elite AE2500 Bedienungsanleitung

Audio Technica

Audio Technica ES945O Bedienungsanleitung

Audio Technica

Audio Technica AT4060 Bedienungsanleitung

Audio Technica

Audio Technica AT4050/LE Bedienungsanleitung

Audio Technica

Audio Technica Midnight Blues MB1000H Handbuch

Audio Technica

Audio Technica ES961RC Betriebsanleitung

Audio Technica

Audio Technica ES933ML Betriebsanleitung

Audio Technica

Audio Technica ES933PMH Betriebsanleitung

Audio Technica

Audio Technica ES925ML6/XLR Bedienungsanleitung

Audio Technica

Audio Technica ATR3350xiS Bedienungsanleitung

Audio Technica

Audio Technica AT2010 Bedienungsanleitung

Audio Technica

Audio Technica PRO 42 Installations- und Betriebshandbuch

Audio Technica

Audio Technica AT898 Bedienungsanleitung

Audio Technica

Audio Technica AT2010 Bedienungsanleitung

Audio Technica

Audio Technica ES915SC Betriebsanleitung

Audio Technica

Audio Technica ES945 Betriebsanleitung

Audio Technica

Audio Technica AT831b Bedienungsanleitung

Audio Technica

Audio Technica ProPoint PRO 51Q Bedienungsanleitung

Audio Technica

Audio Technica UniPoint AT853RWx Bedienungsanleitung

Audio Technica

Audio Technica ES961 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung