Audio Technica ATR2100-USB Bedienungsanleitung

ATR2100-USB

OFF

Instruction Manual

ATR2100-USB

Cardioid Dynamic USB/XLR Microphone

Contents

Introduction & features 2

Setting up your microphone with pivot mount & desk stand 3

Preliminary setup with Mac OS X 4

Preliminary setup with Windows XP 6

Preliminary setup with Windows Vista 9

Preliminary setup with Windows 7 10

Using headphones 13

Selecting software 13

Setting your software levels 13

Positioning your microphone 13

Protecting your microphone 13

Specifications 14

Warranty 15

Thank you for buying the Audio-Technica ATR2100-USB cardioid dynamic USB/XLR microphone.

Equipped with both USB and an XLR outputs, this digital/analog mic is designed both for live

performance and digitally capturing music or any acoustic audio source using your favorite recording

software.

The ATR2100-USB offers high-quality articulation and intelligibility perfect for home studio recording,

field recording, podcasting, voiceover, and on-stage use. Its cardioid polar pattern reduces pickup of

sounds from the sides and rear, improving isolation of desired sound source.

The microphone also features a built-in headphone jack with volume control that allows you to directly

monitor your microphone’s output during recording. The microphone’s focused pickup pattern delivers

excellent off-axis rejection, while its A/D converter with a 16-bit, 44.1/48 kHz sampling rate ensures

clear, articulate sound reproduction.

Audio-Technica’s state-of-the-art design and manufacturing techniques ensure that the microphone

complies with the company’s renowned consistency and reliability standards.

Features

• Handheld dynamic microphone with USB digital output and XLR analog output

• USB output connects to your computer for digital recording, while the XLR output

connects with your sound system’s conventional microphone input for use in live

performance

• Smooth, extended frequency response ideally suited for podcasting, home studio

recording, field recording, voiceover, and on-stage use

• Built-in headphone jack allows you to directly monitor your microphone’s output without

audible delay

• Adjust headphone volume with easy-to-use controls on the bottom of the microphone

• High-quality A/D converter with 16-bit, 44.1/48 kHz sampling rate

• Compatible with Windows and Mac

• Low-mass diaphragm provides excellent frequency response

• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving

isolation of desired sound source

• Tripod desk stand with folding legs for secure and easily portable tabletop use

• Pivoting, threaded stand mount attaches securely to the supplied tripod or to a

conventional microphone stand

• USB and XLR cables included

• Durable metal construction for long-lasting performance

• On/off switch functions for both USB and analog operation

Compliance with FCC rules (USA only)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:(1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC WARNING

You are cautioned that any changes or modifications not expressly approved in this manual could

void your authority to operate this equipment.

Canada only

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme á la norme NMB -003 du Canada.

OFF

1. Windscreen–Multi-stage grille design offers excellent protection against plosives and sibilance

without compromising high-frequency clarity

2. Capsule–Dynamic microphone element with cardioid polar pattern

3. Blue LED–Blue light shows mic is receiving USB power (Note: The blue LED is not affected

by the on/off switch position)

4. ON/OFF switch–Functions for both USB and analog operation

5. Metal construction–Tough, durable, resilient design

6. Headphone level control–Up/Down dial controls headphone volume

7. XLR connector–XLR connector with analog output for connection to PA system’s conventional

microphone input

8. USB–USB connector for connection to your Mac or PC

9. Headphone Jack–1

/8-inch (3.5mm) stereo jack for connecting your headphones

10. USB cable

11. XLRM to XLRF cable

Setting up your microphone with included pivot mount and tripod desk stand

A. Screw the pivot mount microphone mount onto the threaded portion of the desk stand.

B. Extend the tripod legs to provide a wide, secure base, and place the tripod desk stand on

a flat surface.

B. Install the ATR2100-USB microphone into the microphone mount, with ON/OFF switch up

C. The top of the microphone should be facing the sound source.

D. Use a screwdriver or coin to loosen and tighten the pivot screw for angle adjustment.

E. Plug the provided USB cable into the USB output at the base of the microphone, or plug the

provided XLR cable into the microphone input of your sound system.

Note: Many recording software programs are available online. Audacity is widely used free software

for recording and editing sounds. It is available online at http://audacity.sourceforge.net/

ATR2100-USB

1. Plug the free end of the provided USB cable into the USB port on your computer. The microphone’s

blue LED will illuminate, indicating the microphone is receiving power.Your computer will

automatically recognize the USB device and install a driver.

2. To select the ATR2100-USB as your audio input, first, open your System Preferences.

Preliminary setup with Mac OS X

ATR2100-USB USB

3. Next, click Sound to display the Sound preference pane.

4. Click the Input tab and select the ATR2100-USB as the device for sound input.

Your preferences are now set to use the ATR2100-USB on your Mac with GarageBand or another

recording program of your choice.

(Service Pack 2; other operating systems may vary slightly)

1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue

LED will illuminate, indicating the mic is receiving power. Your computer will automatically

recognize the USB device and install a driver.

2. In the lower right portion of your screen you may see a message that new hardware was found;

or you may see a driver software installation notice.

3. To select the ATR2100-USB as your default recording device, begin at your Start menu.

Select Control Panel.

Preliminary setup with Windows XP

4. Select Sounds and Audio Devices.

5. Select the Audio tab, and choose ATR2100-USB as the default device.

6. Adjust computer volume by clicking on the Volume button beneath Sound recording

Default device.

Preliminary setup with Windows XP (continued)

ATR2100-USB

7. Through the Wave In window, you can set the computer volume or mute the microphone.

Your preferences are now set to use the ATR2100-USB with Windows XP with the recording

program of your choice.

ATR2100-USB

Microphone

ATR USB Mic

Working

Microphone

SigmaTel C-Major Audio

Working

Preliminary setup with Windows Vista

1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue

LED will illuminate, indicating the mic is receiving power. Your computer will automatically

recognize the USB device and install a driver.

2. In the lower right portion of your screen you may see a message that new hardware was found;

or you may see a driver software installation notice.

3. To select the ATR2100-USB as your default recording device, begin at your Start menu.

Select Control Panel.

4. Select (double-click) Sound.

5. Select the Recording tab. Make sure that the AT2100-USB microphone is set as the default

recording device. (You should see a green check mark beside the USB microphone icon.)

Your preferences are now set to use the ATR2100-USB with Windows Vista with the recording

program of your choice.

1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue

LED light will illuminate, indicating the mic is receiving power. Your computer will automatically

recognize the USB device and install a driver.

2. In the lower right portion of your screen you may get a message that new hardware was found;

or you may see a driver software installation notice.

3. Start menu > Control Panel > Sound

To select the ATR2100-USB as your default recording device, begin at your Start menu.

Select Control Panel.

Preliminary setup with Windows 7

Inhaltsverzeichnis

Andere Audio Technica Mikrofon Handbücher

Audio Technica

Audio Technica ATR1300 Bedienungsanleitung

Audio Technica

Audio Technica U853R Betriebsanleitung

Audio Technica

Audio Technica AT3032 Bedienungsanleitung

Audio Technica

Audio Technica AT897 Bedienungsanleitung

Audio Technica

Audio Technica AT831b Bedienungsanleitung

Audio Technica

Audio Technica unipoint U853R Bedienungsanleitung

Audio Technica

Audio Technica AT898 Bedienungsanleitung

Audio Technica

Audio Technica ES935SC6 Betriebsanleitung

Audio Technica

Audio Technica AT829cW Bedienungsanleitung

Audio Technica

Audio Technica Artist Elite AE3300 Bedienungsanleitung

Audio Technica

Audio Technica UniPoint AT853PMWx Bedienungsanleitung

Audio Technica

Audio Technica ES915SML Betriebsanleitung

Audio Technica

Audio Technica UniPlate AT851RWx Bedienungsanleitung

Audio Technica

Audio Technica MICROSET AT892 Bedienungsanleitung

Audio Technica

Audio Technica UniPoint AT857AMa Bedienungsanleitung

Audio Technica

Audio Technica AT853-ELE Bedienungsanleitung

Audio Technica

Audio Technica ESW-T214 Betriebsanleitung

Audio Technica

Audio Technica AT4033a Bedienungsanleitung

Audio Technica

Audio Technica ES945O/TB3 Bedienungsanleitung

Audio Technica

Audio Technica MT838IIa Bedienungsanleitung

Audio Technica

Audio Technica AT2020 Bedienungsanleitung

Audio Technica

Audio Technica ATR1100 Bedienungsanleitung

Audio Technica

Audio Technica unipoint U857AU Bedienungsanleitung

Audio Technica

Audio Technica ES947 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung