Audio Technica ES925C6/XLR Bedienungsanleitung

ES925C6/XLR

ES925C12/XLR

ES925C15/XLR

ES925C18/XLR

ES925C21/XLR

ES925C24/XLR

User Manual

CARDIOID CONDENSER

MODULAR GOOSENECK MICROPHONE

WITH XLR POWER MODULE

■Introduction

Thank you for purchasing this product. Before using the product, read through

the user manual to ensure that you will use the product correctly. Please keep

this manual for future reference.

■Features

• Modular microphone system comprised of an ES Series capsule, gooseneck

assembly, and power module.

• RGB LED built into the gooseneck assembly can be linked seamlessly with

ATUC Series products and the desk stand (AT8699R).

• Insert the power module into a standard XLRF-type connector, or use the

included quick mount stand adapter (AT8473) to attach it to a microphone

stand.

• Cover a wide sound acquisition range from 90° to 360° by replacing the

capsule.

■Safety precautions

Although this product was designed to be used safely, failing to use it correctly

may result in an accident. To ensure safety, observe all warnings and cautions

while using the product.

■Cautions for the product

• Do not subject the product to strong impact to avoid malfunction.

• Do not disassemble, modify or attempt to repair the product.

• Do not handle the product with wet hands to avoid electric shock or injury.

• Do not store the product under direct sunlight, near heating devices or in a

hot, humid or dusty place.

■Notes on use

• Do not swing or pull the product. Doing so may cause disconnection or

damage.

• The circuitry in the microphone takes about 30 seconds to stabilize after power

is supplied. You may hear some audio disturbance during startup.

• Check that the carry case ground is grounded with the mic cable latch firmly

engaged before use.

• Do not excessively bend the gooseneck assembly, rotate the ends of the

capsule, or pull on them. Doing so may cause disconnection or malfunction.

• The product is a modular system comprised of a microphone element,

gooseneck assembly and power module. Make sure the parts are firmly

attached before use.

• Do not remove the rubber O-ring on the power module connecting part at the

lower section of the gooseneck assembly and the lower part of the XLR power

module.

• When attaching parts, remove the black cap on the capsule connecting part

of the gooseneck assembly. Do not remove the silicone part at the end of

the capsule connecting part.

Silicone part

Do not remove

■Assembly

1. • Insert the gooseneck assembly (c) while rotating it into the XLR power

module (d).

• Tighten until it does not rotate, and use the hex wrench (f) to tighten the

set screw (e) and set the gooseneck assembly in place.

• Connect the capsule (b) to the gooseneck assembly, and attach the

windscreen (a).

* If the parts are not sufficiently tightened together, problems may occur

such as the LED not lighting up to the set color or sound is not output.

2. • If you are using the AT8474, make mounting reference holes (with a

diameter of 1.5 mm (0.06") (X) on the circumference of a circle with a

diameter of 40 mm (1.6")) in the mounting surface.

• Make a hole with a diameter of 25.4 mm (1") in the center (Y) of the

mounting surface for the XLR power module.

• The outer diameter of the mounting surface is 52.4 mm (2.1") (Z).

120°

52.4

3-1.5

40.0

25.4

AT8474

■LED color

123

OFF RED GREEN

YELLOW

4567

BLUE

MAGENTA

CYAN WHITE

■Wiring

1 2

PIN2

(Hot)

PIN1

(LED control)

CASE

(Ground)

PIN3

(Cold)

LED control only available with ATUC series products and AT8699R desk stand

■Specifications

ES925Cx/XLR

Element Fixed-charge back plate, permanently polarized condenser

Polar pattern Cardioid

Frequency response 30 - 20,000 Hz

Open circuit sensitivity -40 dB (10.0 mV) (0dB=1V/Pa, 1kHz)

Impedance 130 ohms

Maximum input sound

level 140 dB SPL (1kHz at 1% THD)

Dynamic range 112 dB (1kHz at Max SPL)

Signal-to-noise ratio 66 dB (1kHz at 1Pa, A-weighted)

Phantom power

requirements 11 - 52 V DC, 6.7 mA

Weight

ES925C6/XLR: 102 g (3.6 oz)

ES925C12/XLR: 126 g (4.4 oz)

ES925C15/XLR: 131 g (4.6 oz)

ES925C18/XLR: 136 g (4.8 oz)

ES925C21/XLR: 141 g (5.0 oz)

ES925C24/XLR: 146 g (5.2 oz)

Dimensions

ES925C6/XLR: 197.4 mm (7.8“) x 20.2 mm (0.8“) x 20.2 mm (0.8“)

ES925C12/XLR: 304.8 mm (12“) x 20.2 mm (0.8“) x 20.2 mm (0.8“)

ES925C15/XLR: 381 mm (15“) x 20.2 mm (0.8“) x 20.2 mm (0.8“)

ES925C18/XLR: 457.2 mm (18“) x 20.2 mm (0.8“) x 20.2 mm (0.8“)

ES925C21/XLR: 533.4 mm (21“) x 20.2 mm (0.8“) x 20.2 mm (0.8“)

ES925C24/XLR: 609.6 mm (24“) x 20.2 mm (0.8“) x 20.2 mm (0.8“)

(H×W×D)

Output connector 3-Pin XLRM-type

Optional interchangeable

elements

ESE-Ha (100°), ESE-Oa (360°), ESE-MLa (90°)

Included accessories

Windscreen AT8109a,

Universal isolation mount AT8474,

Quick mount stand adapter AT8473,

Coversion screw adapter (5/8”-27 to 3/8”-16),

Set screw (M2×2 mm (0.08“)) 2 pcs., Hex wrench (0.89 mm (0.04“))

x = 6/12/15/18/21/24

■Polar pattern

240˚

180˚

210˚

270˚

300˚

330˚

0˚

150˚

120˚

90˚

30˚

60˚

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

■Frequency response

5020 20k10k5k2k1k500200100

Response in dB

Frequency in Hertz

LEGEND

0°, 50cm

■Dimensions

XLR power module (ES8544)

20.2

142419770-02-01 ver.1 2019.06.01

ES925C24/XLR

ES925C21/XLRES925C18/XLRES925C15/XLRES925C12/XLRES925C6/XLR

(unit: mm)

197.4

304.8

381.0

457.2

533.4

609.6

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

Global Support Contact: www.at-globalsupport.com

Made in Japan

10dB

φ8.4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Audio Technica Mikrofon Handbücher

Audio Technica

Audio Technica unipoint U853AU Bedienungsanleitung

Audio Technica

Audio Technica ATIR-T88 Bedienungsanleitung

Audio Technica

Audio Technica ES915SC Betriebsanleitung

Audio Technica

Audio Technica C70_convertible Bedienungsanleitung

Audio Technica

Audio Technica MicroSet BP892 Installationsanleitung

Audio Technica

Audio Technica ATM410 Bedienungsanleitung

Audio Technica

Audio Technica AT831b Bedienungsanleitung

Audio Technica

Audio Technica ATR4697 Bedienungsanleitung

Audio Technica

Audio Technica AT835b Bedienungsanleitung

Audio Technica

Audio Technica ATM710 Bedienungsanleitung

Audio Technica

Audio Technica ES945 Bedienungsanleitung

Audio Technica

Audio Technica M3 Bedienungsanleitung

Audio Technica

Audio Technica PRO 35 Bedienungsanleitung

Audio Technica

Audio Technica AT4060 Bedienungsanleitung

Audio Technica

Audio Technica AT935AMRx Bedienungsanleitung

Audio Technica

Audio Technica AT2020 Installationsanleitung

Audio Technica

Audio Technica U841R Bedienungsanleitung

Audio Technica

Audio Technica AT835ST Bedienungsanleitung

Audio Technica

Audio Technica STEREO BOUNDARY MICROPHONE AT849 Bedienungsanleitung

Audio Technica

Audio Technica ES933PMC Bedienungsanleitung

Audio Technica

Audio Technica AT2021 Bedienungsanleitung

Audio Technica

Audio Technica ES933PM/H Bedienungsanleitung

Audio Technica

Audio Technica MT838IIa Bedienungsanleitung

Audio Technica

Audio Technica ATR3500 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung