Audioaccess MA-362 Service Bedienungsanleitung
AUDIOACCESS
MA-362
TWELVE CHANNEL AMPLIFIER
PRELIMINARY SERVICE MANUAL
Harman Consumer Group
250 Crossways Park Dr.
Woodbury, New York 11797
MA-362
Audioaccess®
Twelve
Channel
Amplifier
www.audioaccess.com
The Audioaccess MA-362 Twelve
Channel Amplifier represents a high value
approach while providing twelve channels
of clean amplifier power for multi-room
system applications.
Power to Spare
With a power rating of 50 Watts per
channel at 8 Ohms from 20Hz to 20kHz
with less than .05% THD, the MA-362
will drive virtually any in-wall loudspeaker
to room filling volume. Power into 4
Ohms is even more impressive at 75
Watts per channel. All channels may be
bridged if additional power is required.
Cool operation is ensured with a design
incorporating heat sinks, flow through
ventilation and low-noise fans.
After a series of careful evaluations
and tests, Madrigal has chosen to imple-
ment a conservative and proven design
philosophy with the MA-362 with the
added benefit of improved sound quality
and long component life. Power for each
channel is delivered by a pair of high
current output transistors capable of
delivering over 200 watts, much higher
power than the rated 50 watts per chan-
nel. For example, the output transistors
for each channel can handle up to 12
amps. At rated power, the MA-362 is
drawing only about 3 amps of current per
channel, ensuring its reliable performance.
Control Capabilities
Each pair of channels is controlled by a
Trigger Source Selector, a three-position
switch that selects signal sensing, voltage
trigger input or link (to the trigger signal
of the zone to the immediate left) as the
source for muting control within each
individual zone. A two position Signal Link
Selector, is also provided and is
used to link a zone to the Signal Input
connector of the zone to its left.
Installation Flexibility
Ease of installation, a hallmark of all
Audioaccess products is maintained in the
new MA-362. An external speaker termi-
nation board can be ordered in advance
to allow the installing dealer to “pre-wire”
all of the loudspeakers in the system before
the amplifier is delivered for final installa-
tion. Final hook up consists of plugging
the speaker termination board into a slot
in the rear panel of the amplifier.
Summary
The MA-362 features, performance
and reliability make it the perfect
amplifier choice for a wide variety of
multi-room audio system applications.
Simply Ingenious
A Harman International Company
Audioaccess®
Madrigal Audio Laboratories, Inc.
P.O.Box 781
Middletown, CT 06457-0781
Internet: www.madrigal.com
Fax: 860.346.1540 ©2002 Madrigal Audio Laboratories, Inc.
20202AA – SS/MA-362
Specifications
▲Rack mountable chassis
▲Discrete amplifier design for improved
sound quality
▲Signal Input Connector: six dual RCA jacks,
one per two channel
▲Four position switch to select Stereo, Bridged
Right, Bridged Left, or mono operation for
each zone
▲Independent level controls for each amp channel
▲Trigger Input, euro-style connector, accepts 3
to 24V AC or DC, to “unmute” amp channels
in the zone
▲Trigger Source Selector: three position switch
to select signal sensing, voltage trigger input
or link (to the trigger signal of the zone to the
immediate left) to control muting in the zone.
▲Plug-in Speaker Termination Board, a snap for
advance installations (available separately, not
included with the amplifier)
▲Signal Link Selector: two position switch to
link a zone to the signal input connector of
the zone to its left (excluding zone 1)
▲Power Switch on Front panel
▲Bi-color LED Power Indicator
Features
▲Number of Channels: 12, configured as 6
left/right pairs (zones)
▲Power Output (Unbridged): 50W @ 8Ω,
75W @ 4Ω, 20 - 20k Hz, All Channels Driven
▲Power Output (Bridged): 150W @ 8Ω,
20 - 20k Hz, All Channels Driven
▲THD+Noise: <0.05%, at rated power,
20 - 20k Hz
▲IMD: <0.05% (SMPTE)
▲Frequency Response: 20 - 20k Hz,
+0/-0.2 dB, at rated power, 4Ωload
▲Bandwidth: 5 – 75k Hz. +0, -3dB, at rated
power, 4Ωload
▲S/N: >100dB unweighted (ref: Rated Power),
unbridged into 8Ω
▲Crosstalk: <-70 dB (ref: Maximum Output)
between any two channels (no audible
crosstalk)
▲Protection: Short Circuit, Over Current, DC,
Thermal
▲Muting: Turn on, Turn off, Signal Sensing, and
Triggered per zone
▲Input impedance: 24kΩ
▲Input Sensitivity: 1.0 Vrms (with input trim at
minimum attenuation)
▲Input Level Trim Range: 20dB
▲Gain: 26dB
Dimensions and weight:
▲Height: 7" (178 mm)
(4 rack spaces, not including feet)
▲Width front panel: 19" (483 mm),
Width chassis: 1711⁄16" (450 mm)
▲Depth: 1711⁄16" (450 mm)
▲Weight: 60 lb (27.2 kg) (without carton)
Features, specifications and dimensions are subject to change.
Audioaccess TI-501 Speaker Termination Board (Sold separately)
FEATURES
The Audioaccess MA-362 Twelve Channel Amplifier represents a high value approach while providing twelve channels of
clean amplifier power for multi-room system applications.
Power to Spare
With a power rating of 50 Watts per channel at 8 Ohms from 20Hz to 20kHz with less than .05% THD, the MA-362 will
drive virtually any in-wall loudspeaker to room filling volume. Power into 4 Ohms is even more impressive at 75 Watts per
channel. All channels may be bridged if additional power is required. Cool operation is ensured with a design
incorporating heat sinks, flow through ventilation and low-noise fans. After a series of careful evaluations and tests,
Madrigal has chosen to implement a conservative and proven design philosophy with the MA-362 with the added benefit
of improved sound quality and long component life. Power for each channel is delivered by a pair of high current output
transistors capable of delivering over 200 watts, much higher power than the rated 50 watts per channel.
The output transistors for each channel can handle 12 amps of current. At rated power, the MA-362 draws 2.5 amps of
current, ensuring ample safe operating area headroom and reliable performance.
Zone Muting Control
Each pair of channels is controlled by a three-position Trigger Source switch to select signal sensing, voltage trigger or
link (to the trigger signal of the zone to the immediate left).
Unique Input Bussing
A two position Signal Link switch is also provided for each zone. This allows assignment of direct input to the zone, or to
share the source utilized by the zone to its left, eliminating the need for Y-cords to distribute common inputs to multiple
zones.
Installation Flexibility
Ease of installation, a hallmark of all Audioaccess products is maintained in the new MA-362. An external speaker
termination board can be ordered in advance to allow termination of loudspeakers before the amplifier is delivered for final
installation. At final, simply plug the speaker termination board onto the rear panel of the amplifier.
Summary
The MA-362 features, performance and reliability make it the perfect amplifier choice for a wide variety of multi-room
audio system applications.
Specifications:
• Number of Channels: 12, configured as 6 left/right pairs (zones)
• Power Output (Unbridged): 50W @ 81Ú2,
• 75W @ 41Ú2, 20 - 20k Hz, All Channels Driven
• Power Output (Bridged): 150W @ 81Ú2,
• 20 - 20k Hz, All Channels Driven
• THD+Noise: <0.05%, at rated power,
• 20 - 20k Hz
• IMD: <0.05% (SMPTE)
• Frequency Response: 20 - 20k Hz, +0/-0.2 dB, at rated power, 41Ú2 load
• Bandwidth: 5 — 75k Hz. +0, -3dB, at rated power, 41Ú2 load
• S/N: >100dB unweighted (ref: Rated Power), unbridged into 81Ú2
• Crosstalk: <-70 dB (ref: Maximum Output) between any two channels (no audible crosstalk)
• Protection: Short Circuit, Over Current, DC, Thermal
• Muting: Turn on, Turn off, Signal Sensing, and Triggered per zone
• Input impedance: 24k1Ú2
• Input Sensitivity: 1.0 Vrms (with input trim at minimum attenuation)
• Input Level Trim Range: 20dB
• Gain: 26dB
• Dimensions and weight:
Height: 7" (178 mm) (4 rack spaces, not including feet)
Width front panel: 19" (483 mm), Width chassis: 17 1/16" (450 mm)
Depth: 17 1/16" (450 mm). Weight: 60 lb (27.2 kg) (without carton)
Features, specifications and dimensions are subject to change.
MA362
Electrical/Mechanical Parts Lists
Note:
These parts lists may contain some part
numbers that are not valid, or No Longer
Available.
Descriptions and Reference Designators,
when included, should aid technicians in part
substitution.
If necessary, call the Parts department at
1-516-496-3400 ext. 6553 for assistance.
Andere Handbücher für MA-362 Service
2
Inhaltsverzeichnis
Andere Audioaccess Verstärker Handbücher
Audioaccess
Audioaccess PX-600 Bedienungsanleitung
Audioaccess
Audioaccess MA-362 Service Bedienungsanleitung
Audioaccess
Audioaccess PX-600 Montage- und Bedienungsanleitung
Audioaccess
Audioaccess MA-361 Service Bedienungsanleitung
Audioaccess
Audioaccess PX-612 Bedienungsanleitung
Audioaccess
Audioaccess MA-362 Service Handbuch
Audioaccess
Audioaccess PX-612 Bedienungsanleitung
Audioaccess
Audioaccess PX-600 Bedienungsanleitung
