AudioCodes Mediant 800 Series Montageanleitung

Hardware Installation Manual

AudioCodes Gateway & Session Border Controller Series

Mediant 800 Gateway

and E-SBC

Version 7.2

Notice Mediant 800 Gateway & E-SBC | Hardware Installation Manual

Notice

Information contained in this document is believed to be accurate and reliable at the time of

printing. However, due to ongoing product improvements and revisions, AudioCodes can-

not guarantee accuracy of printed material after the Date Published nor can it accept

responsibility for errors or omissions. Updates to this document can be downloaded from

https://www.audiocodes.com/library/technical-documents.

This document is subject to change without notice.

Date Published: November-20-2019

WEEE EU Directive

Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with

unsorted waste. Please contact your local recycling authority for disposal of this product.

Customer Support

Customer technical support and services are provided by AudioCodes or by an authorized

AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes

products and for contact information, please visit our website at

https://www.audiocodes.com/services-support/maintenance-and-support.

Documentation Feedback

AudioCodes continually strives to produce high quality documentation. If you have any comments

(suggestions or errors) regarding this document, please fill out the Documentation Feedback form

on our website at https://online.audiocodes.com/documentation-feedback.

Stay in the Loop with AudioCodes

Notes and Warnings

Read and adhere to all warning statements in this document before installing the

device.

The device is an INDOOR unit and therefore, must be installed only indoors. In addition,

FXS and Ethernet port interface cabling must be routed only indoors and must not exit

the building.

- ii -

Notice Mediant 800 Gateway & E-SBC | Hardware Installation Manual

Caution Electrical Shock: Do not open or disassemble this device. The device carries

high voltage and contact with internal components may expose you to electrical shock

and bodily harm.

The device must be installed and serviced only by qualified service personnel.

The device must be installed ONLY in restricted access locations that are compliant

with ETS 300 253 guidelines where equipotential bonding has been implemented.

Disconnect the device from the mains and Telephone Network Voltage (TNV) before

servicing.

Open source software may have been added and/or amended for this product. For

further information, please visit our website at https://www.audiocodes.com/services-

support/open-source/ or contact your AudioCodes sales representative.

Related Documentation

Document Name

SBC-Gateway Series Release Notes for Latest Release Versions

SBC-Gateway Series Release Notes for Long Term Support Versions

Gateway and SBC CLI Reference Guide

Mediant 800 Gateway and E-SBC User's Manual

Document Revision Record

LTRT Description

10259 FXO warning statement.

10260 Power amperage updated.

10261 E1 cabling warning statement regarding STP.

10262 Max. power consumption.

10263 Power surge warnings; AC input current.

10265 Miscellaneous formatting.

10266 E1/T1 PSTN fallback added.

- iii -

Notice Mediant 800 Gateway & E-SBC | Hardware Installation Manual

LTRT Description

10267 AC power cable warning (Japanese).

10680 BRI cabling warning; LED label for console port; Status LED state typo.

10681 Download URL for CentOS driver.

10682 Typo fixed re 19-inch rack mounting brackets.

10683 Logo updated; fallback updated.

10684 Lifeline splitter cable – not supplied.

10685 Wall mounting added; Mediant 800C added; Mediant 800A removed; logos updated;

CENTOS removed.

10687 Power fuse updated; AC power rating updated; warnings added for grounding; cable

type for LAN updated.

10688 PRI PSTN fallback hardware note updated; OSN driver download note removed.

10689 Logo updated on front panel.

10690 Mediant 800C rear panel updated with correct Amps.

10691 Button press duration updated for reset to defaults; trademarks.

- iv -

Content Mediant 800 Gateway & E-SBC | Hardware Installation Manual

Table of Contents

1 Introduction 1

2 Unpacking the Device 2

3 Physical Description 3

Physical Dimensions and Operating Environment 3

Front Panel Description 3

Ports and Buttons 3

LEDs Description 5

LAN Interface LEDs 5

FXS LEDs 5

FXO LEDs 5

BRI LEDs 6

E1/T1 (PRI) LEDs 6

STATUS LED 6

Power LEDs 7

Rear Panel Description 8

4 Mounting the Device 10

Desktop Mounting 10

Wall Mounting 10

19-Inch Rack Mounting 12

Using a Pre-Installed Rack Shelf 13

Using Mounting Brackets 13

5 Cabling the Device 15

Grounding and Surge Protection 15

Connecting to LAN 16

Connecting to Analog Devices 18

Connecting the FXS Interfaces 18

Connecting the FXO Interfaces 19

Connecting the FXS Analog Lifeline 20

ISDN BRI Interfaces 21

Connecting to BRI Lines 21

Connecting PSTN Fallback for BRI Lines 22

Connecting ISDN E1/T1 Interfaces 23

Connecting to ISDN PRI (E1/T1) Trunks 23

Connecting PSTN Fallback for E1/T1 Trunks 24

Connecting to a Computer for Serial Communication 25

Connecting the OSN Server 26

Connecting to Power 27

Connecting to AC Power 28

Connecting to DC Power 29

6 Maintenance 32

Replacing the Power Fuse 32

- v -

CHAPTER1 Introduction Mediant 800 Gateway & E-SBC | Hardware Installation Manual

1 Introduction

This document provides a hardware description of the Mediant 800 Gateway and E-SBC (hereafter

referred to as device) and step-by-step procedures for mounting and cabling the device.

The device supports the following interfaces (customer ordered):

■E1/T1 (PRI):

●Mediant 800B: Up to 2 E1/T1 port interfaces (over single copper wire pair).

●Mediant 800C: Up to 4 E1/T1 port interfaces

■Up to 8 BRI ports (supporting up to 16 voice channels).

■Up to 12 FXS port interfaces.

■Up to 12 FXO port interfaces.

■12 LAN Ethernet interfaces - up to 4 Gigabit Ethernet ports and up to 8 Fast Ethernet ports.

These ports operate in port-pair redundancy, providing up to 6 port-pair groups.

■Open Solutions Network (OSN) server platform for hosting third-party applications such as an

IP PBX.

■Power:

●Mediant 800B: Single AC power inlet

●Mediant 800C: Single AC power inlet, and a DC power inlet (optional, customer ordered)

●Mediant 800 includes two hardware revisions which differ as follows:

✔Mediant 800B: Max. 2 E1/T1; AC power only

✔Mediant 800C: Max. 4 E1/T1; AC and DC power (optional)

●Hardware configurations may change without notice. Currently available hardware

configurations are listed in AudioCodes Price Book. For available hardware

configurations, contact your AudioCodes sales representative.

●The Fast Ethernet ports are available only on "pure" SBC Mediant 800 (i.e., without

PSTN / Gateway interfaces).

●For software configuration, refer to the User's Manual.

- 1 -

CHAPTER2 Unpacking the Device Mediant 800 Gateway & E-SBC | Hardware Installation Manual

2 Unpacking the Device

Follow the procedure below for unpacking the carton in which the device is shipped.

➢To unpack the device:

1. Open the carton and remove packing materials.

2. Remove the chassis from the carton.

3. Check that there is no equipment damage.

4. Ensure that in addition to the chassis, the package contains the following items:

●Four anti-slide bumpers for desktop installation

●Two mounting brackets for 19-inch rack mounting

●One AC power cord

●(Mediant 800C only) one AC/DC power adaptor (optional, separate orderable item)

5. Check, retain and process any documents.

If there are any damaged or missing items, notify your AudioCodes sales representative.

- 2 -

CHAPTER3 Physical Description Mediant 800 Gateway & E-SBC | Hardware Installation Manual

3 Physical Description

This section provides a physical description of the device.

Physical Dimensions and Operating Environment

The device's physical dimensions and operating environment are listed in the following table:

Table 3-1: Physical Dimensions and Operating Environment

Physical Specification Description

Dimensions (H x W x D) 1U x 32 x 34.5 cm (12.6 x 13.6 inches)

Weight 2.5 kg (5.5 lbs.)

Environmental ■Operational: 5 to 40°C (41 to 104°F)

■Storage: -25 to 85°C (-13 to 185°F)

■Humidity: 10 to 90% non-condensing

Front Panel Description

The front panel provides the telephony port interfaces, various networking ports, reset pinhole

button, and LEDs.

Ports and Buttons

The device's front panel is shown in the following figure and described in the subsequent table.

Figure 3-1: Mediant 800B Front Panel

Figure 3-2: Mediant 800C Front Panel

- 3 -

CHAPTER3 Physical Description Mediant 800 Gateway & E-SBC | Hardware Installation Manual

The figures above are used only as an example. The number and type of port interfaces

depends on the ordered model.

Table 3-2: Front Panel Description

Item # Label Description

1 Mediant 800B:

POWER /

STATUS

Mediant 800C:

AC PWR /DC

PWR /

STATUS

Power and operating status LEDs. For more information, see

LEDs Description on the next page.

2FXS /FXO /

BRI /PRI

Telephony port interfaces that can include one or a combination

of the following, depending on the ordered model:

■FXS port interfaces (RJ-11)

■FXO port interfaces (RJ-11)

■ISDN BRI port interfaces (RJ-45)

■ISDN PRI (E1/T1) port interfaces (RJ-48)

Note:

■The FXS/FXO interfaces support loop-start signalling (indoor

only).

■For supported hardware configuration options, refer to the

Release Notes.

3GE Up to four 10/100/1000Base-T (Gigabit Ethernet) LAN ports for

connecting IP phones, computers, or switches. These ports

support the following features:

■1+1 LAN port redundancy: These ports are grouped in pairs,

where one port is active and the other redundant. When a

failure occurs in the active port, a switchover is done to the

redundant port.

■Half- and full-duplex modes

■Auto-negotiation

■Straight or crossover cable detection

4FE Eight Fast Ethernet (10/100Base-TX) RJ-45 LAN ports for

connecting IP phones, computers, or switches. The supported

port features are the same as the GE ports (see Item #6 above).

Note: The Fast Ethernet ports are available only on "pure" SBC

Mediant 800 (i.e., without PSTN / Gateway interfaces).

5 // Reset pinhole button for resetting the device and optionally, for

restoring the device factory defaults. To restore the device to

factory defaults, with a paper clip or any other similar pointed

object, press and hold down the Reset pinhole button for at least

15 seconds (but no more than 25 seconds).

6CONSOLE RS-232 port (RJ-45) for serial communication.

- 4 -

CHAPTER3 Physical Description Mediant 800 Gateway & E-SBC | Hardware Installation Manual

Item # Label Description

7USB/WWAN Two USB ports that can be used for various functionality such as

saving debug captures to a USB storage device.

LEDs Description

The front panel provides various LEDs depending on the device's hardware configuration (e.g., the

available telephony interfaces). These LEDs are described in the subsequent subsections.

LAN Interface LEDs

Each LAN port provides a LED (located on its left) for indicating LAN operating status, as described

in the following table.

Table 3-3: LAN LEDs Description

LED Color LED State Description

Green On Ethernet link established.

Flashing Data is being received or transmitted.

- Off No Ethernet link.

FXS LEDs

Each FXS port provides a LED for indicating operating status, as described in the following table.

Table 3-4: FXS LEDs Description

LED

Color

LED

State Description

Green On Phone is off-hooked.

Flashing Rings the extension line.

Red On ■Error - malfunction in line or out of service due to Serial Peripheral

Interface (SPI) failure.

■Disabled port initiated by user (using the CLI command, analog-port-

enable)

- Off Phone is on hook.

- Off No power received by the device.

FXO LEDs

Each FXO port provides a LED for indicating operating status, as described in the following table.

- 5 -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AudioCodes Tor Handbücher

AudioCodes

AudioCodes Mediant 1000 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 800 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 800B Bedienungsanleitung

AudioCodes

AudioCodes MediaPack MP-11x Series Bedienungsanleitung

AudioCodes

AudioCodes MediaPack Series Montageanleitung

AudioCodes

AudioCodes Mediant 600 Bedienungsanleitung

AudioCodes

AudioCodes MediaPack MP-272 Bedienungsanleitung

AudioCodes

AudioCodes mediapack MP-500 Bedienungsanleitung

AudioCodes

AudioCodes MediaPack 1288 Bedienungsanleitung

AudioCodes

AudioCodes MP-1xx Fast Track Bedienungsanleitung

AudioCodes

AudioCodes MediaPack MP-124 Bedienungsanleitung

AudioCodes

AudioCodes MediaPack MP-124 Bedienungsanleitung

AudioCodes

AudioCodes MediaPack MP-124 Bedienungsanleitung

AudioCodes

AudioCodes MP-252 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 1000 Bedienungsanleitung

AudioCodes

AudioCodes MediaPack 5 Series Montageanleitung

AudioCodes

AudioCodes M500L Montageanleitung

AudioCodes

AudioCodes Mediant 1000 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 800 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 2000 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 2000 Bedienungsanleitung

AudioCodes

AudioCodes Mediant 600 Montageanleitung

AudioCodes

AudioCodes MediaPack MP-263 Bedienungsanleitung

AudioCodes

AudioCodes MP-11 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung