AudioCodes RXVCam50 Bedienungsanleitung

1 |Page

RXVCam50 AI HD

Video Conference Camera

User Manual

This User Manual provides a brief introduction to the functions, installation, and operations of the

RXVCam50 AI HD Video Conference Camera.

The document describes two product flavors:

RXVCam50L. The field of view is 81 degrees (suitable for a Large room)

RXVCam50M. The field of view is 100 degrees (suitable for a Medium room)

The target environment size is the only difference between the RXVCam50L and the RXVCam50M.

2 |Page

Safety Precautions

This User Manual describes the functions,

installation, and operations related to the

RXVCam50 camera. Read the manual thoroughly

before installation and use.

How to Use

To prevent damage to this product or any

product connected to it, use it within the

specified range:

1. Do not expose the product to rain or

moisture.

2. To prevent the risk of electric shock, do not

open the case. Installation and

maintenance should only be carried out by

qualified technicians.

3. Do not use the product beyond the

specified temperature, humidity, or power

supply specifications.

4. Wipe it with a soft, dry cloth when cleaning

the camera lens. Wipe it gently with a mild

detergent if needed. To avoid scratching

the lens and affecting the image, do not use

strong or corrosive detergents.

Electric Safety

Installation and use of this product must strictly

comply with local electrical safety standards.

Handle with Care

Avoid damage to product caused by heavy

pressure, strong vibration or immersion during

transportation, storage and installation.

Install with Caution

1. Do not rotate the camera head violently

otherwise it may cause mechanical failure.

2. This product should be placed on a stable

desktop or other horizontal surface. Do not

install the product obliquely otherwise it

may display an inclined image.

3. If the camera is installed on a TV or a

computer, the base can be fixed by four

double-sided adhesive trays.

4. Housing of this product is made of organic

materials. Do not expose it to any liquid,

gas or solids which may corrode the shell.

5. Ensure there are no obstacles within

rotation range of the holder.

6. Do not power on before completing

installation.

Do not Disassemble the Product Without

Permission

This product contains no parts which can be

maintained by users themselves. Any damage

caused by dismantling the product by users

without permission is not covered by the

warranty.

Magnetic Interference

Electromagnetic fields at specific frequencies

may affect the image. This product is Class A. It

may cause radio interference for household

applications. Appropriate measures are

required.

3 |Page

Quick Installation Instructions

The figure below illustrates the camera interface.

Camera Interface

1. Camera lens

2. Indicator Light

4. Tripod fixing hole

5. Positioning hole

6. Bracket

7. USB3.0 interface

Camera Operation

1. Product Installation: Fix the device onto an LCD screen, on top of a computer; place it on a desktop, or on

a tripod mounting.

2. Connect the camera using a USB cable to a computer, a video conference terminal, or any other USB

input device. Log in to the video conference software and select a video device.

4 |Page

Product Overview

Product Model: RXVCam50

Camera Dimensions:

Accessories:

Wireless remote controller

USB3.0 Type-A to Type-B, 3-meter cable

2 * AAA batteries

5 |Page

Main Features

The camera includes integral AI functions which can automatically centrally frame all people in a meeting. It

features smooth functionality and superior performance with advanced ISP processing algorithms that

provide vivid images with evenly clear brightness, strong color layering, high resolution, and good color

rendition. The product is easy and convenient to install and maintain and is stable and reliable.

4K UHD: Employs a 1/2.5 inch, 8 million-pixel high-quality CMOS sensor; supports 4K UHD; provides 4K@

30fps MJPG video resolution maximum; and provides clear UHD video and vivid expressions and

movements. At the same time, it’s compatible with 1080p and 720p resolution.

ePTZ:ePTZ and 4x digital zoom

Dual stream output: The USB3.0 port supports simultaneous main stream and sub-stream output.

Auto framing: Includes an excellent facial detection algorithm which automatically adjusts the zoom

according to the number of people in the meeting. It can frame all the people in the meeting and display

them in the middle of the scene.

Wide view angle without distortion:

RXVCam50L. The field of view is 81 degrees (suitable for a Large room)

RXVCam50M. The field of view is 100 degrees (suitable for a Medium room)

Multiple Installations: Standard equipped with a mold clamp. Easy to install on any device, be it LCD

screen, PC, table, or tripod.

Easy to Use: No need to download a driver; USB plug and play.

Wide Applications: Personal video conferencing, enterprise video conferencing, Unified Collaboration

(UC), etc.

6 |Page

Specifications

Parameter RXVCam50L RXVCam50M

Camera

Image Sensor 1/2.5-inch high-quality 4K CMOS Sensor

Effective Pixels 8.28MP 16:9

Video output

port

1* USB3.0, Type B, supports audio output over USB3.0

View Angle 91°(D) / 81°(H) / 54°(V) 102°(D)/100°(H)/64°(V)

Video Format Main stream: 3840×2160@30fps、1920×1080P@30fps/25fps、

1280×720P@30fps/25fps, etc.

Sub-stream:1280×720P@30fps/25fps; 640×480P@30fps/25fps;

320×172P@30fps/25fps, etc.

Min

Illumination

0.1Lux (F1.8, AGC ON)

Lens f=3.24mm f=2.26mm

Aperture F2.1 F1.8

Digital zoom 4X

Ultra-low

illumination

On/Off

White Balance Auto / Manual/ One Push/ 3000K/ 3500K/ 4000K/ 4500K/ 5000K/ 5500K/ 6000K/

6500K/ 7000K

Focus Auto / Manual

Exposure Auto / Manual

Auto framing On/Off/Sensitivity

Backlight

compensation

On/Off

Dual stream On/Off

USB Feature

Operation

Systems

Windows 7 (1080p maximum), Windows 8.1, Windows 10; macOS™ 10.10 or higher,

Linux (required for UVC support)

Video

Compression

format

YUY2, NV12, MJPG, H.264

7 |Page

Parameter RXVCam50L RXVCam50M

USB

communication

protocol

UVC, UAC

PTZ control Supports EPTZ

Hardware

requirement

2.4 GHz Intel@ Core 2 Duo processor or higher

2GB RAM or more USB 2.0/USB3.0 port (USB 3.0 is needed for 4K video)

Other Parameters

Input Voltage 5V

Input Current 1A (max.)

Power

consumption

5W (max.)

Store

Temperature

-10℃～+60℃

Store Humidity 20%～90%

Working

Temperature

-10℃～+50℃

Working

Humidity

20%～80%

Dimension (W*H*D）180mm×42.5mm×46.3mm

Weight Approximately 0.23 kg

Application Indoor

Accessory Wireless Remote Controller

USB3.0 Type-A to Type-B 3-meter cable

2 * AAA batteries

8 |Page

Interface

External Interface

The figure below shows the external interface connections.

Interface Diagram

9 |Page

Application

Wireless Remote Controller

Keys Instructions

1. SET: Use in combination with other keys to

confirm actions).

2. Standby:Press for the device to enter standby

mode; press again for the device to redisplay

the picture.

3. CAMERA SELECT:Select the camera to

control.

4. Number keys: Set or call 0-9 presets.

5. FOCUS (unsupported)

+Focus in

-Focus out

6. AUTO (unsupported)

7. MANUAL (unsupported)

8. ZOOM

Press + to zoom in

Press – to zoom out

9. SET PRESET | CLEAR PRESET

Set Preset: Press and then press a

number key (0-9) to set a position.

Note that 10 presets can be set using

the RC.

Clear Preset: Press and then press the

number key (0-9) to clear a preset.

To clear all presets: Press the #key

three consecutive times (see Key

Combinations below for other possible

key combinations)

10. Pan/Tilt

Up: Long-press ↑; release to stop

Down: Long-press ↓; release to stop

Left: Long-press ←; release to stop

Right: Long-press →; release to stop

HOME: Press for the camera lens to

return to the middle position, or to

enter the next menu.

11. BLC ON/OFF:Press to switch the back light

compensation on or off.

12. MENU

Press to open or close the On-Screen

Display (OSD) menu or return to the

previousmenu.

10 |Page

13. Setting Camera Address

F1, F2, F3, F4. Press the following

sequence to set an address:

Press * + #+ F1 to set Camera Address 1

Press * + #+ F2 to set Camera Address 2

Press * + #+ F3 to set Camera Address 3

Press * + #+ F4 to set Camera Address 4

Key Combinations

Press # + #+ #to clear all presets

Press * + #+ 6 to restore defaults

Press * + #+ 9to flip switch

Basic Operations

Pairing the RC with the Camera

1. Connect the camera to the PC using a USB3.0

Type-A to Type-B cable.

2. On the Remote control (RC), long-press the

SET and *keys simultaneously for three

seconds; the LED indicator on the RC starts

flashing.

3. Release the SET and *keys.

4. Unplug the USB cable from the camera for

one second and then plug it back in; the LED

indicator on the RC turns off.

Pairing has successfully completed.

Andere Handbücher für RXVCam50

Inhaltsverzeichnis

Andere AudioCodes IP-Kamera Handbücher

AudioCodes

AudioCodes RXV81 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung