Audiovox ACAB104 Bedienungsanleitung

4 Sensor Backup Obstacle Sensing System

Model: ACAB104

Users Manual

Features:

•Four reversing sensors detect obstacles between 1- 7 feet

•Includes 0°, 5°, and 10° angle sensor sleeves to fit most

bumpers

•Activates only when vehicle is in reverse

•Will not drain battery or void factory warranty

•Includes speaker/buzzer with 3 settings - high, low, and off

•Four detection zones give the following warnings:

1 = slow beep within 5-7 feet

2 = medium beep within 3-5 feet

3 = fast beep within 1-3 feet

4 = steady tone within 1 foot

•Works with any vehicle

0° 5° 10°

Warnings

This product is intended to assist in safe driving by signaling the driver of

obstacles behind the vehicle while the vehicle is in reverse. You, as the

driver, are solely responsible for the safe operation of your vehicle and the

safety of your passengers according to your local traffic regulations. Do

not use any features of this system to the extent it distracts you from safe

driving. Your first priority while driving should always be the safe

operation of your vehicle. Audiovox Electronics Corporation cannot accept

any responsibility whatsoever for accidents resulting from failure to

observe these precautions or safety instructions.

1. This product utilizes high voltage. Any unauthorized modifications

or damage to the product may result in electrical shock. Handle all

components with care. Inspect regularly for damage to

components and cabling.

2. You are responsible for ensuring that the installation of this

product does not void or affect the vehicle manufacturer’s

warranty. Audiovox Electronics Corporation or its subsidiaries are

not liable in full or in part for improper installation resulting in

loss or damage to your property, or for voiding all or part of the

vehicle manufacturer’s warranty.

3. Do not apply excessive force to any of the components contained

within this kit. Excessive force used before, during or after

installation that results in a damaged or non-functional part will

void all warranties.

4. Please follow the procedures in this installation manual. Improper

installation or modification of this product will void all warranties.

Product Description

This 4 Sensor Backup Obstacle Scanning System is designed to assist the

driver by providing an alert when an object is behind the vehicle whenever

the vehicle is shifted into reverse. Never rely solely on this product to

ensure the area is clear of children and/or obstructions. This product is not

intended to replace existing safety procedures, but rather to add an

additional safety tool for your vehicle.

Using the Sensor System

Your four sensor backup obstacle sensing system transmits and receives

ultrasonic waves from the four sensors mounted in your vehicle’s rear bumper.

As the transmitted waves bounce off obstacles behind your vehicle and are

received back by the sensors, the unit’s control box converts these waves into

warning sounds, or beeps, which alerts you, the driver, of obstacles behind

your vehicle.

Your four sensor backup obstacle sensing system will signal in five increasing

warning tones (beeps) which correlates the vehicle’s distance from an

obstacle. When the vehicle’s reverse gear is engaged, the system will emit a

quick beep. This indicates that the system is on and the sensors are operating.

The following chart shows the detection range and beep associated with the

distance of an object from the rear bumper.

Distance

(meter) Distance (feet) Type of Beep

>1.5 >4.9 No beep

1.5-1.0 4.9-3.3 Slow repeating

beep

1.0-0.7 3.3-2.3 Medium

repeating beep

0.7-0.4 2.3-1.3 Faster

repeating beep

<0.4 <1.3 Solid beep

When towing a trailer, the system will emit a solid beep. Move the switch on

the speaker to the “off” position to turn off the speaker. Remember to turn the

switch to the “high” or “low” position when the vehicle is not towing a trailer.

Specifications

Power Supply DC12V

Current Draw <180mA

Detecting Distance 1 to 7 ft

Sensor Cable Length 23 ft

Control Box Size 4.125”x 3”x .830”

Operating Temperature Range -40°F~ 176°F

Maintenance

Though your backup system requires minimum care, you should maintain its

condition and performance using the following the guidelines:

•Keep the control box away from moisture, extreme heat or cold.

•Keep the sensors free from snow, ice, and debris.

Troubleshooting

Problem Solution

System does not beep

when reverse gear is

engaged and object is in

range

1. Check if ignition/reverse light on

2. Check power cable connection

3. Check switch on speaker

System beeping without

obstacle behind vehicle 1. Remove anything mounted on

the vehicle higher than the

sensor

2. Verify sensor is installed at the

correct height

3. Verify sensor is in the correct

position

4. Check all connections

5. Reduce sensitivity

Low sensitivity 1. Clean sensors

2. Check all connections

3. Check if voltage is normal

4. Set sensitivity to high

Re-start often Poor contact of power cable or

ground

No obstacles present and

system is beeping Check sensors for snow, ice, heavy

rain, and/or debris

Andere Handbücher für ACAB104

Inhaltsverzeichnis

Andere Audiovox Automobilelektronik Handbücher

Audiovox

Audiovox CMT405 Bedienungsanleitung

Audiovox

Audiovox CarStream Fehlerbehebungshandbuch

Audiovox

Audiovox CMT-3000 Bedienungsanleitung

Audiovox

Audiovox SBAR - SBAR Bar-Type Chrome Back-up Sensor Bedienungsanleitung

Audiovox

Audiovox Prestige 128-6182A Bedienungsanleitung

Audiovox

Audiovox CMT400 Bedienungsanleitung

Audiovox

Audiovox CMT-125E Bedienungsanleitung

Audiovox

Audiovox Advent PSD100 Bedienungsanleitung

Audiovox

Audiovox XADV2 Bedienungsanleitung

Audiovox

Audiovox TR93 Bedienungsanleitung

Audiovox

Audiovox ACA240 Bedienungsanleitung

Audiovox

Audiovox Auto Security AS-GMDLT03 Bedienungsanleitung

Audiovox

Audiovox Prestige APS-45B Bedienungsanleitung

Audiovox

Audiovox ACA240 Bedienungsanleitung

Audiovox

Audiovox Prestige 128-8602 Bedienungsanleitung

Audiovox

Audiovox CarStream Bedienungsanleitung

Audiovox

Audiovox REMIRS Bedienungsanleitung

Audiovox

Audiovox A-ACC-BMW-DSP Betriebsanleitung

Audiovox

Audiovox Pursuit PRO 9845 Bedienungsanleitung

Audiovox

Audiovox CMOS2 Bedienungsanleitung

Audiovox

Audiovox ACA200 Bedienungsanleitung

Audiovox

Audiovox CMOS2 Bedienungsanleitung

Audiovox

Audiovox ASH400 Bedienungsanleitung

Audiovox

Audiovox Auto Security AA-9103N Bedienungsanleitung

Beliebte Automobilelektronik Handbücher anderer Marken

GoldCruise

GoldCruise GC90Ci Bedienungsanleitung

DRG

DRG LC 120 Bedienungsanleitung

Blue Ox

Blue Ox BX8848 Bedienungsanleitung

Dometic

Dometic MAGICWATCH MWE890K Bedienungsanleitung

Perfect Power

Perfect Power SMT8-T5 Bedienungsanleitung

Honeywell

Honeywell Thor VM3A Bedienungsanleitung

Waeco

Waeco MagicWatch MWE250 Bedienungsanleitung

Rydeen

Rydeen BKM091 Bedienungsanleitung

Skoda

Skoda 5E0 054 630 Bedienungsanleitung

VDO

VDO SENDER UNIT 2159-0 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

Movon

Movon MDAS-3LFFHD Bedienungsanleitung

Pioneer

Pioneer Comfort adapter CA-D-PI.150 Bedienungsanleitung

Dietz

Dietz 1110 Bedienungsanleitung

Crux

Crux RVCFD-79 Bedienungsanleitung

Nonda

Nonda ZUS Bedienungsanleitung

iDataLink

iDataLink Maestro Bedienungsanleitung

COBHAM

COBHAM Explorer 325 Bedienungsanleitung