Audiovox Rampage ACC-52 Programmierhandbuch

MODEL ACC-52

REMOTE-CONTROL

10-DISC CD CHANGER

OWNER'S MANUAL

AND

INSTALLATION GUIDE

OPEN

INTRODUCTION

Congratulations on your purchase of this remote mount 10 Disc CD Changer. It allows you to easily upgrade

yourexistingcarstereosystemtothequalityofCompactDiscentertainment. Theentiresystemplaysthrough

your FM Stereo car radio and stereo speaker system - there’s nothing else to add or replace. Best of all, the

CDChangeriseasytoinstall. Thereareonlythreewirestoconnectandfour simple plug-in cables.Justfollow

the simple step-by-step instructions that follow.

FEATURES

nRemote mount changer holds up to 10 compact discs

nRemote control with back-lit LCD panel, displays disc, track and function

nRemote controls include forward and reverse track and disc search, track and disc scan, shuffle and

repeat play plus high speed audible cue and review search

nAdvanced technology includes 8x oversampling digital filter and twin 1-bit digital/analog converters

nThe special design allows horizontal, vertical or 45-degree mounting.

TOLL-FREE ASSISTANCE

The installation and connections are so simple we doubt you’ll need our help, but if you do, we’re here to help

you. Just call our toll-free assistance line at 1-800-645-4994 during the days/hours shown.

EASTERN

8:30AM - 7PM

9AM - 5PM

7:30AM - 6PM

8AM - 4PM

CENTRAL

6:30AM - 5PM

7AM - 3PM

MOUNTAIN

PACIFIC

5:30AM - 4PM

6AM - 2PM

MON. - FRI.

SATURDAY

DAY TIME ZONE

INDEX

Introduction and Contents Page 2 Mounting the Remote Control Page 12

Packing List Page 3 Remote Control Operating Instructions Page 13

Before Installing the Unit Page 4 Hints for Correct and Safe Operation Page 15

Where to Install the Changer Page 5 Handling the Discs Page 15

Installation Page 6 Use of the CD Magazine Page 16

Overall Wiring View Page 9 CD Changer Operating Instructions Page 17

Wiring the CD Changer Page 10 Specifications Page 17

Troubleshooting Page 18

CD Magazine (P/N ACC-52MAZ)

1 pc.

Index label sheet

1 pc.

Owner's Manual

and Installation Guide

1 pc.

Self-tapping screw

(M5 x 12)

4 pcs.

Seals (A)

1 pc.

5 Meter Din Cable

1 pc.

Hexagonal bolt with washer

(M5 x 10)

7 pcs.

INSTALLATION PARTS

OTHER ACCESSORIES

MAIN UNIT

PACKING LIST

Changer

Bracket (L)

1 pc.

Bracket (R)

1 pc.

Seals (B)

1 pc.

FM Module

Remote Control

Screw (C)

Phillips Head Self-Tapping

Screw

(M3x12)

2 pcs.

OPEN

Note

Ifthechangeristobeinstalledinacarthatisequippedwithanon-boarddriveornavigationcomputer,donotdisconnect

the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra

caution during installation not to cause a short circuit.

Do not install the unit in the following locations.

lLocations exposed to direct sunlight.

lWhere hot air is discharged from the car heater.

lIn areas subject to extreme temperatures.

Incorrect installation can cause the sound to "skip" when playing a disc.

Mount the unit firmly in place, using the supplied brackets and screws.

Be careful not to damage the car wiring.

lBe sure to use the supplied screws.

lBe careful not to snag any wires when tightening screws.

lDo not use any of the screws that are part of the brake or steering system, to install the unit.

lThisunitcannotbeinstalledonitsside,end,orupsidedown. Installationinsuchpositionswillcausemalfunctioning

of the mechanism.

Installation and Wiring Precautions

To prevent a short-circuit,

lBe sure to turn off the ignition and remove the negative (-) battery cable, prior to installation.

lConnect power wires last.

BEFORE INSTALLING THE UNIT

Transport Lock Screws

The mechanism in the CD changer is "locked" into place during shipment by the

transport screws. Be sure to remove the screws prior to installation.

lCaution l

After removing the transport lock screws, place the supplied seals (A) over the screw

holes. These seals are used to keep dust out of the unit, which could cause a malfunction.

TRANSPORT LOCK SCREWS

(2 RIGHT SIDE, 1 LEFT SIDE)

ADDITIONAL 10-DISC MAGAZINES

Additional CD magazines are available as an accessory item (Part No. ACC-52MAZ) from the store where your ACC-52

was purchased. If they are out of stock, you can order them direct from Audiovox. Send a check or money order (do not

send cash) made payable to Audiovox Corp in the amount of $49.95 (U.S. Currency) to:

Audiovox Corp.

150 Marcus Blvd.

Hauppauge, N.Y. 11788

Attn: Parts Department

NOTE: New York residents, please include applicable sales tax.

MOUNT ON FLOOR OF TRUNK

(HORIZONTAL OR 45 DEGREES)

MOUNT ON

SIDEWALL OF

CARGOAREA

MOUNT ON BULKHEAD BEHIND

SEAT OF PICKUP TRUCKS

MOUNT ON BACKWALL

OF HATCH AREA

MOUNT ON SIDE OF

TRUNK SIDEWALL

TRUNK MOUNTING (SEDANS)

This is usually the easiest location to use as there is ample

space available. Check that you do not interfere with the

removal of your spare tire, etc. Observe caution on fuel tank

statedabove.Theonlynegativeaspectistheneedtoroutethe

wiring from the trunk to your car dashboard.

HATCHBACKS, WAGONS & VANS

A simple investigation of the areas shown will often provide

several possibilities. Observe caution on fuel tank stated

above and make sure the unit is protected from cargo,

passenger entry and exit, etc.

UNDER PASSENGER’S FRONT

SEAT/BEHIND SEAT

If sufficient space and easy access exist, the area under the

passenger's front seat is ideal, and will also allow easy wiring

access. However, you may need to temporarily remove the

seat for ease of installation. The area behind either the

passenger’s or driver’s seat on pickup trucks is another ideal

location.

MOUNT UNDER LIP OF TRUNK

MOUNT UNDER

SEAT

The ACC-52changer is designedfor horizontal(flat),vertical(upright)or 45-degreemounting.Itmustneverbemounted

upside-downoroneitheroneofit'ssidesasexplainedpreviously. Afewofthemanymountingpossibilities are shownbelow.

The following precautions must be considered when selecting the mounting location:

1. FuelTank-Neverinstallaboveyourfueltankastheholesyoumustdrillmaypiercethetankorthefuellines. Alsocheck

for other obstructions such as wires, etc.

2. ExcessiveHeat-Avoidareasexposedtodirectsunlight(ontopofrearpackageshelf)ornexttoyourcarheater’soutput

ducts.

3. Ease of Use - Make certain the changer is easily accessible for loading and unloading the CD magazine.

4. Distance - The data cable that joins the changer to the FM module is 15 feet long. Do not exceed this length.

5. If mounting to a plastic surface, do not use the self-tapping screws provided. Use the bolts and hex nuts provided for

a more secure installation.

IMPORTANT: Failure to properly secure the CD changer is the most common cause of all “skipping” and related

CD play problems. Changer must be mounted as explained on the following pages.

WHERE TO INSTALL THE CHANGER

PROCEDURE FOR HORIZONTAL INSTALLATION

INSTALLATION

Theunitcanbeinstalledhorizontally,verticallyorata45°angle. Thepositionofthebuilt-inanti-vibrationsprings(leftandright

side), must correspond to the mounting position chosen. If the springs are not set correctly for the type of installation chosen,

the anti-vibration compensation will not be effective and vibration may cause the disc to skip.

CAUTION: Aftersettingthebuilt-in anti-vibration springs, place the supplied Seals (B) over the holes. These seals are used

to keep dust, which could cause a malfunction, out of the unit.

position "H"

position "V"

HORIZONTAL INSTALLATION

Set the left and right anti-vibration

springs to position "H".

VERTICAL INSTALLAITON

Set the left and right anti-vibration

springs to position "V".

45° ANGLE INSTALLATION

Set the left and right anti-vibration

springs to position "45°".

Drill holes 4mm in diameter.

Attachbracket(L)andbracket(R)toeachsideoftheunit,

using the hexagonal bolts with washer base (M5 x 10)

Determinethe mounting location, and drill four mount-

ing holes.

Securetheunitinplace,usingfourself-tappingscrews

(M5 x 12).

Use RTV (silicone sealer) on screw threads or around

the holes to prevent moisture intrusion.

Never mount the unit near the fuel tank.

Bracket (R)

Bracket (L)

Hexagonal bolt (4)

with washer base (M5 x 10)

Anti-vibration

springs position

NOTE: Use seals (A) to cover unused

mountingholesonsidesof unit.

V45

position "45°"

45°

Bracket (R)

Self-tapping screw (M5 x 12)

Bracket (L)

Hexagonal bolt

with washer base (M5 x 10)

Bracket (R)

Bracket (L)

2Attachbracket(L)andbracket(R)toeachsideofthe

unit, using the hexagonal bolts with washer base

(M5 x 10).

Mount the unit in place, using four self-tapping screws

(M5 x 12).

Use RTV (silicone sealer) on screw threads or around

the holes to prevent moisture intrusion.

Set the left and right anti-vibration springs to position

"V".

Determinethemountinglocation,anddrillfourmount-

ing holes.

PROCEDURE FOR VERTICAL INSTALLATION

NOTE: If the anti-vibration spring position has been changed and verified for vertical mounting

(as shown on page 3), start with step 2.

Never mount the unit near the fuel tank.

Drill holes 4 mm in diameter.

position "V"

Self-tapping screw

(M5 x 12)

Bracket (R)

Bracket (L)

NOTE:Useseals(A)tocoverunused

mountingholesonsidesofunit.

2Attachbracket(L)andbracket(R)toeachsideofthe

unit, using the hexagonal bolts with washer base

(M5 x 10).

Mount the unit in place, using four self-tapping screws

(M5 x 12).

Use RTV (silicone sealer) on screw threads or around

the holes to prevent moisture intrusion.

Set the left and right anti-vibration springs to position

"45°".

Determinethemountinglocation,anddrillfourmount-

ing holes.

PROCEDURE FOR 45° ANGLE INSTALLATION

NOTE: If the anti-vibration spring position has been changed and verified for 45° angle

Never mount the unit near the fuel tank.

Bracket (L)

Bracket (R)

Hexagonal bolt

withwasherbase(M5 x10)

Drill holes 4mm in diameter. Bracket (R)

Self-tapping screw (M5 x 12)

NOTE:Useseals(A)tocoverunused

mountingholesonsidesofunit.

Bracket (L)

position "45°"

45°

NOTE: When routing wires and cables

from the rear of the car to the dash-

board, it is best to conceal the wires

under carpeting. If you do not know

how to do this, your local auto me-

chanicorcarstereoinstallershouldbe

consulted.

REMOTE CONTROL

CABLE (4-1/2 FEET)

CHANGER

BLACK GROUND WIRE

OVERALL WIRING VIEW

This page is provided to give you a quick look at the entire wiring of the ACC-52. Use it to plan your wire routing

paths and possible connection points. Detailed wiring is explained in the following pages.

DATACABLE

(15 FEET)

ORANGE/WHITE

WIRE CONNECT TO THE CAR'S

FUSEBLOCK AT THE

"RADIO" OR "ACCESSORY"

IDENTIFIED TERMINALS

GREEN/WHITE POWER WIRE

ANTENNA INPUT

ANTENNA OUTPUT

EXISTING CAR RADIO

ANTENNA SOCKET

EXISTING CAR

STEREO

EXISTING CAR

RADIOANTENNA

CABLE

CONNECT TO

SOURCE OF CON-

STANT +12 VOLTS

REMOTE CONTROL

FM MODULE

WIRING THE FM MODULE

The FM module should be positioned near your existing car

stereo and the 15 foot data cable should be connected to it.

Make the following connections to the FM module:

15 FOOT DATA CABLE

"TO CD CHANGER"

LABEL

CAR FUSEBLOCK

ORANGE w/WHITE

STRIPE WIRE

15 FOOT EXTENSION LEAD

(MAY NOT BE REQUIRED)

SPLICE INTO "LIVE" WIRE

AND TAPE SPLICE

EXISTING +12 VOLT

"LIVE" WIRE

"RADIO" OR "ACCESSORY"

TERMINAL

FM MODULE

12 VOLT

CARBATTERY

DATA CABLE

The15footdatacableconnectsthechangertotheFMmodule.

First connect the end of the data cable labelled "TO CD

CHANGER"tothesocketontheleftsideofthechanger.Route

theother endof the cableup tothecar’s dashboardarea near

yourexistingcarradioandplugthedatacable into the mating

socket on the end of the FM module.

WIRING THE CD CHANGER

ORANGE WITH WHITE STRIPE WIRE

Attached to the FM module is a 3 foot orange with white

stripe wire. This is to be connected to a + 12 volt circuit that

is only live when the ignition is on. The best connection

point is at the car’s fuse block at the “RADIO” or “ACCES-

SORY” identified terminals.

GREEN WITH WHITE STRIPE

POWER WIRE

The 3 foot green with white stripe wire must be connected

toa “live” 12 volt wire in the vehicle. You will have to check

the wire you connect it to and make certain it is always “live”’

even when the car’s ignition is turned off. If none is found,

route the wire to the car’s fuseblock and connect it to a “live”

circuit there.

FM MODULE

GREEN w/WHITE

STRIPE WIRE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Audiovox CD-Player Handbücher

Audiovox

Audiovox CE149MP Bedienungsanleitung

Audiovox

Audiovox Prestige SP-11CDP Bedienungsanleitung

Audiovox

Audiovox Portable MP3 CD Player Bedienungsanleitung

Audiovox

Audiovox CE142AR Bedienungsanleitung

Audiovox

Audiovox CE146B Bedienungsanleitung

Audiovox

Audiovox SP-11CDS Bedienungsanleitung

Audiovox

Audiovox CE148 Bedienungsanleitung

Audiovox

Audiovox CE1705 Bedienungsanleitung

Audiovox

Audiovox CE154MP Bedienungsanleitung

Audiovox

Audiovox CE101A - annexe 1 Bedienungsanleitung

Audiovox

Audiovox CE101A - annexe 1 Bedienungsanleitung

Audiovox

Audiovox CDA1361 Bedienungsanleitung

Audiovox

Audiovox PAV6D Bedienungsanleitung

Audiovox

Audiovox CE211R Technisches Handbuch

Audiovox

Audiovox CE140A Bedienungsanleitung

Audiovox

Audiovox CE215 Technisches Handbuch

Audiovox

Audiovox CE147 Bedienungsanleitung

Audiovox

Audiovox DMP8733 Bedienungsanleitung

Audiovox

Audiovox Rampage ACC-31 Bedienungsanleitung

Audiovox

Audiovox CE150MP Bedienungsanleitung

Audiovox

Audiovox CE145B Bedienungsanleitung

Audiovox

Audiovox CE270 Bedienungsanleitung

Audiovox

Audiovox CE270 Bedienungsanleitung

Audiovox

Audiovox DM8900-00 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung