AUDMIC TE-003 Bedienungsanleitung

Turntable with Bluetooth reception and wooden speakers
User Manual
Questions, problems, missing parts? CONTACT --------[email protected]
Before returning to Amazon, please use above contact for Customer Service.
TURNTABLE RECORD
PLAYER INSTRUCTIONS
Model No: TE-003
1

1. Do not use this product near water.
2. Never use a record with cracks or warps.
3. Never use a record that is cracked or warped, as this may cause extreme wear and destruction of the needle.
4. Never use unusual play methods such as scratching. This unit is not designed for such playback.
5. Do not expose the unit to direct sunlight, high temperature or high humidity. This may cause warping or deformation. When holding the
record, hold only the label or the outer edge.
6. Do not touch the record groove. Dust and fingerprints may cause distortion of the sound. Care of the record
7. Use a special record cleaner and cleaner solution (sold separately). Wipe the record cleaner in a circular motion along the record groove.
•45 rpm adapter
•2x Stylus(one installed)
•AC power adapter
•7-inch Turntable mat
•User’s quick guide
•User’s manual
•3 speed turntable plays 33 1/3, 78, and 45 rpm records;
•Auto stop function
•Supports Bluetooth Input
•Aux Line-in
•External stereo speakers
•RCA stereo audio outputs
•Volume Control/ON & OFF Power
•3.5mm Headphone Jack
•Vinyl Recording via PC
Accessories Includes
About Built-in Bluetooth
1. The Bluetooth devices used in this unit use the same frequency band (2.4GHz) as wireless LAN devices (IEEE802.11b/g/n), so if they are
used near each other, they may interfere with each other, resulting in reduced communication speed or connection failure. In this
case, please use it as far away as possible (about 10m).
2. We do not guarantee the connection with all Bluetooth devices.
3. Also, depending on the conditions, it may take some time to connect.
Instructions Before Start
Please Read the Manual Before Using this product. Keep these instructions for future reference.
Main Features
About Records Applied
2

PARTS ILLUSTRATION:
Tone Arm &
Stylus
Record Speed
Choose 33, 45, or 78, depending on the type of record to be played.
Auto Stop
Select ON or OFF.
Tone Arm
Lock
Turntable
Tone Arm
Arm Lift Switch
45 rpm Record Adapter
Orientation
Rear Inputs
AC Power Input
PC- USB Encoding
Mode
Selection
Phono
Bluetooth
AUX
PC-USB Out AUDIO OUT SPEAKER OUT DC IN 12V/2A
1. Line out to the included pair of
speakers
Notice: All connection cable sold separately
PC OUT
2. Audio output to
your own speakers
or system
3

SET UP
1. An AC/DC adaptor with an output of 12V DC 2.0A is included with this Turntable with Bluetooth reception and Wooden Speakers.
The adaptor is required for operating the unit.
2. Connect the speaker cables from each speaker to the back of the unit (White jack to White hole, Red Jack to Red hole)
3. Firmly and securely insert the DC plug of the adaptor to the DC IN Jack on the back of the unit.
4. Plug the adaptor’s AC plugs into a power outlet rated at 110-240V AV ~ 50 Hz.
5. Turn on the unit by the POWER/VOLUME Knob. The Power Led Light Indicator will turn on.
Audio
Tube
Cable connect to turntable
Remark: To avoid Larsen effect or echo noise, you can do the following:
1. Put your speakers at minimum distance of 60 cm or more from your turntable.
2. Let the dustcover open when you play a record at higher sound volume.
3. Keep the back of the speakers at minimum distance of 10 cm from from your wall.
12V/2A
Dedicated AC Plug
Warning:
Do Not Change The Original Adaptor
Unless Being Advised By Qualified
Technician)
Master
Volume
power
ON/OFF Mode
Selection
Phono
Bluetooth
AUX
Headphone
AUX
Cable connect to turntable
Front
4

It is recommended that you use extreme care when manipulating the tone arm, stylus, and other components of this
turntable. These parts are very sensitive and can easily break or become damaged if they are carelessly handled.
1. Turn the the Volume and power button clockwise till the LED indicator lights up, if not, check the power and adapter.
2. Turn the mode selector button aim to "PHO" on the control panel. Or once you place the tone am on the vinyl, the
turntable will switch to vinyl mode and Bluetooth mode will automatically be disabled if you are using "BT" mode .
3. Remove the shroud that protects the stylus, and release the lock that holds the Tone Arm in it’s resting position.
4. Before use, turn the turntable clockwise about 10 times by hand to make sure there is no belt shift or kinks from the
pulleys.
5. Select the correct turntable speed based on the type of record you wish to play, and place the record on the turntable. If
you are playing a 45 rpm record, use the included adapter and place it between the turntable and the record.
6. Use the Tone Arm Lift Switch to raise the Tone Arm from its catch.
7. Using your hand, gently swing the Tone Arm into the desired location over the record. The turntable will start spinning as
the Tone Arm is moved into position.
8. Use the Tone Arm Lift Switch to safely lower the stylus onto the record.
Using the Lift Switch instead of your hand will reduce the chance of accidentally damaging the record or the stylus.
9. Slide the Auto Stop Switch to ON to enable the Auto Stop feature. When the record is finished playing, it will
automatically stop the turntable. Use the Lift Switch to raise the stylus off of the record, and gently return the Tone Arm to
the catch by hand.
Note: Some records place their Auto Stop area outside of the range of this unit. In these cases, the record will stop playing before
the last track is reached. Set the Auto Stop Switch to OFF and use the Tone Arm Lift Switch to safely raise the stylus off the record
when the end of the record has been reached.
10.When not in use, secure and lock the Tone Arm in its resting position and replace the protective shroud over the stylus.
This will minimize the risk of accidental damage to these sensitive parts.
33 1/3 rpm
12in diameter vinyl record
78 rpm
10in diameter vinyl record
45 rpm & adapter
7in diameter vinyl record
Lock Unlock
Operation---Listen to a Record
5

On an iPhone
•Go to SETTINGS > BLUETOOTH
Search for devices (Make sure Bluetooth is
turned ON)
Paired
Bluetooth
Bluetooth
ON
BLTD
Devices
Now discoverable
12:12 PM
On an Android Phone
Bluetooth settings
Bluetooth devices Scanning
Bluetooth
Device name
BLTD
Visible
Search for devices
Make device visible
•Go to SETTINGS > BLUETOOTH
Search for devices (Make sure Bluetooth is
turned ON)
12:12 PM
Bluetooth--- pairing with bluetooth
Requires 3.5 mm audio input cable (not included).
Note: When the Source selector is set to Aux In, When a 3.5mm audio cable is plugged into the unit, it will automatically
detect the input and power ON in Aux In mode.
1. Turn the mode selector button aim to "AUX" on the control panel.
2. Plug a 3.5 mm audio input cable into the "AUX" on the unit and the audio output/headphone output on an MP3 Player or
other audio source.
3. Use the controls on your connected music player to select and play audio.
4. Audio played through the connected device will now be heard through the speakers.
LINE-IN---Listen to auxiliary input
1. Turn on the the ON/OFF /Volume button to power on, turn the mode selector button aim to "BT" on the control panel.
2. Using the controls on your Bluetooth device, search for and select "BLTD" in your Bluetooth settings to pair. If your device requests
a password, enter the default password 0 0 0 0 and and press OK.
3. When successfully paired and connected, an audible chime will sound. After initial pairing, the unit will stay paired unless unpaired
manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to
connect, repeat the above steps.
4. After pairing to a Bluetooth device, use the controls on your connected Bluetooth Device to select a track.
6

PC record--- recording vinyl to MP3 via PC
Installing the software
1. Download the Audacity software on your computer or laptop from official website (www.audacityteam.org)
2. Double click the downloaded files and follow the instructions and the software will automatically install as
below
•Click ALL the ‘Next’ or "Install" options that follows till the " Finish" button appears
7

3. Click on ‘Finish’ to complete the installation
4. Audacity should automatically start up (The Audacity icon will now be seen on the desktop, double click on it to start Audacity
running if it not start up automatically)
Note: If an icon does not appear, go to the ‘C‘ drive under ‘My Computer‘, click on ‘Program files‘ and then ‘Audacity‘. Right
click on the ‘orange ball wearing Headphones’ icon and select ‘Send to’ then ‘Desktop (create shortcut)‘.
8

Using the Audacity software
•Plug the USB cable (cable included in the package)into the back of the unit and the other end into a spare
USB port on your computer.
•Run the Audacity software by double clicking the Audacity icon.
•Before recording, click on Edit at the top of the main page; select Preferences at the bottom of the menu
which will open up Preferences.
•At the recording part of the window open the Device menu by using the down arrow on the right hand side.
Select the ‘Realtek High Definition Au’ option from the Playback sub menu. Select the ‘USB PnP Audio
Device’ option from the ‘Recording - Device’ sub menu. The lower box enables the number of recording
channels to be set, 1 is Mono and 2 is Stereo, select the Stereo option.
•Click ‘OK’ once the options have been selected
Recording to computer using Audacity
•Start the record playing as described above, and press Record icon(red dot) on the left corner of the
window to start recording to the computer.
•Once recorded use the buttons on the Transport controls at the top of the screen to Pause, Play, Stop, Go
to Start, Go to end and Record of Wav. audio form.
•Use the file, Edit, Select, View, Transport, Tracks, Generate, Effect, Analyze, Tools, Help menus to Save,
Export and edit your music and save.
9

Exporting your music files to other devices
•Once you have recorded and edited your music, you will need to save your files to the computer. To do
this, click on "File" option and move down to "Export " option as to save as MP3/WAV... .
•It can be saved to an existing one or a new folder.
•Click on this and you will promptly be asked for the file name and other information of the music
recorded which will be saved in the local for reference.\
•You can find the recording music from your saved folder and playback.
10
Inhaltsverzeichnis
Andere AUDMIC Drehscheibe Handbücher


















