Aukey BT-F4 Bedienungsanleitung
Wireless FM Transmitter
User Manual
Model: BT-F4
AUKEY International Ltd.
www.aukey.com | [email protected]
No.102, Building P09, Electronic Trade Center
Huanan City, Pinghu Town, Longgang District
Shenzhen, Guangdong 518111 CN
208-170148
FCC ID: 2AFHP-BT-F4
Contents
English
Deutsch
Français
Español
Italiano
日本語
01~07
08~13
14~19
20~25
26~31
32~37
Introduction
Thank you for purchasing the AUKEY BT-F4 2-in-1WirelessCarAudioKit. Please read
this user manual carefully and keep it in a safe place for future reference. If you need
any assistance, please contact our support team with your product model number
and Amazon order number.
Package Contents
AUKEY BT-F4 2-in-1WirelessCarAudioKit
Dual Port USB Car Charger
Sticky Gel Pad
User Manual
Warranty Card
Product Diagram
1. Frequency Up
2. LED Display
3. Multi-function Button
4. Previous Track
5. LED Indicator
6. Microphone
7. Next Track
8. Car Charger
9. USB Port
10. Cigarette Lighter
Connector
2
3
4
5
6
7
8
9
10
1
- 01 -
Setting Up
1. Place the transmitter at desirable location using the sticky gel pad.
2. Plug the car charger into your cigarette lighter.
3. Plug the USB end of the transmitter into the car charger.
Turn On / Off
• BT-F4 will automatically power on when you start your car and power off when you
turn off your engine
• To manually turn off, press Multi-function Button for 5 seconds
• To restart, press Multi-function Button for 3 seconds
Pairing
1. Activate your mobile phone's Bluetooth function.
2. In the list of available pairing devices, find and select “BT-F4”.
3. If a code or pin is required for pairing, please enter “0000”.
4. When successfully paired, the blue light will be on with a voice prompt.
5. Simultaneously press and hold Previous Track Button and Next Track button for 3
seconds, the transmitter will automatically go into pairing mode when it is paired.
- 02 -
Notes
• The BT-F4 will automatically shut down after 5 minutes in pairing mode if no device
is paired
• Maximum wireless operating range is 33ft (10m). If you exceed this range, the
transmitter will lose connection and go into standby mode. The connection will be
reestablished once you reenter wireless range within 5 minutes
• The transmitter will automatically reconnect to the last successfully paired device.
To connect to other devices, please repeat the previous “Pairing” process
Simultaneously Pairing with Two Devices
1. Follow the instructions in the “Pairing” section to pair the transmitter with Device A.
2. Once paired, disable Bluetooth function on Device A and turn off the transmitter.
3. Follow the instructions in the “Pairing” section to pair with the Device B.
4. Once paired with Device B, reactivate Bluetooth function on Device A and the
transmitter will automatically reconnect.
5. You can now make and receive calls from either of the two paired devices.
FM Frequency Setting
1. Set the car radio station to any unoccupied frequency.
2. Press Frequency Up Button and hold for 2 seconds, the frequency figure will flash.
Set the BT-F4 FM transmitter to the same frequency by pressing the Previous Track
/ Next Track. Press the Frequency UP Button once to save your setting.
- 03 -
Controls & LED Indicator
Making phone call
Once paired with your smartphone, incoming phone call can be handled via the FM
Transmitter.
To answer / end a call
To redial last number
Microphone Switching
Press Multi-function Button once
Press and hold Multi-function Button for
2 seconds
Double press Multi-function Button
Press and hold Previous Track Button for
2 seconds
Press and hold the Next Track button for
2 seconds
Double press Previous Track Button to
switch between two mobile phones
Press and hold Multi-function Button for
2 seconds to switch between the
device and your phone for talking
3. Now you can enjoy music on your device from the car audio system.
Charge Your Devices
Use the USB port to charge any smartphone, tablet, GPS, camera or other USB powered
devices.
To mute / resume a call
Voice Notification
Device Switching
To reject an incoming call
- 04 -
Streaming music
Once connected, you can stream music from your device to your car. Music will
automatically pause with incoming phone call, and resume once the call is ended.
Pause / Resume
Volume Control
Next / Previous Track
Press Multi-function Button once
Press Next / Previous Track Button once
Press Next / Previous Track Button for 2 seconds
LED Indicator
Blue LED flashes 5 times
Red LED flashes 3 times
Blue and red light flash alternately
Blue LED on
Blue LED flashes once every second
Blue LED flashes every 7 seconds
Status
Power on
Power off
Pairing mode
Connected / Playing music
Incoming call
During a call
Specifications
Standard
Supported Profile
Maximum Working Range
Working Voltage
Item Weight
FM Frequency Range
Interval
Stability
v4.1
A2DP, AVRCP, HSP, HFP
33ft / 10m
DC 5V
1.19oz / 33.8g
87.5 - 108.0 MHz
0.1 MHz
10ppm (-10°C - 55°C / 14°F - 131°F)
- 05 -
Suggested
• Please unplug the transmitter from vehicle cigarette lighter when not using for a
long time
• Please keep away from liquids and direct sunlight
Warranty & Customer Support
For questions, assistance, support, or warranty claims, please contact us at the address
below that corresponds with your region. Please include your Amazon order number
and product model number.
*Please note, AUKEY can only provide after sale service for products purchased directly from
AUKEY. If you have purchased from a different seller, please contact them directly for service or
warranty issues.
Notice for US
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation
- 06 -
FCC Rules
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
● Reorient or relocate the receiving antenna
● Increase the separation between the equipment and receiver
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
● Consult the dealer or an experienced radio/TV technician for help
Caution
Changes or modifications made to this device that are not expressly approved by
AUKEY may void the user's authority to operate this equipment.
- 07 -
Inhaltsverzeichnis
Sprachen:
Andere Aukey Sender Handbücher
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
