AURES OLC 15 Bedienungsanleitung
User Manual
Revision v1.1 March 2010
OLC 15 VESA Monitor
1
Copyright 2010 March.
All Rights Reserved
Manual Version 1.1
The information contained in this document is subject to change without notice.
We make no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular
purpose. We shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use
of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced or translated to another language without the prior written consent
of the manufacturer.
TRADEMARK
Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
Other trademarks mentioned herein are the property of their respective
owners.
2
Safety
IMPORTANT SAFETY INSTRUCTIONS
1. To disconnect the machine from the electrical power supply, turn off the
power switch and remove the power cord plug from the wall socket. The
wall socket must be easily accessible and in close proximity to the
machine.
2. Read these instructions carefully. Save these instructions for future
reference.
3. Follow all warnings and instructions marked on the product.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it
from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near or
over a radiator or heat register, or in a built-in installation unless proper
ventilation is provided.
7. This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product
where persons will walk on the cord.
9. Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
product.
CE MARK
This device complies with the requirements of the EEC directive
2004/108/EC with regard to “Electromagnetic compatibility” and
2006/95/EC “Low Voltage Directive”
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
3
CAUTION ON LITHIUM BATTERIES
There is a danger of explosion if the battery is replaced incorrectly. Replace
only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
LEGISLATION AND WEEE SYMBOL
2002/96/EC Waste Electrical and Electronic Equipment Directive on the
treatment, collection, recycling and disposal of electric and electronic devices
and their components.
The crossed dustbin symbol on the device means that it should not be
disposed of with other household wastes at the end of its working life. Instead,
the device should be taken to the waste collection centers for activation of the
treatment, collection, recycling and disposal procedure.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
4
Revision History
Revision
Number Description Revision Date
1.0 Initial release 2009 May
1.1
-Update for new VFD module:
•configuration by software (no
dip-switches)
•non volatile EEPROM to store
configuration
•supports user defined character set
•software utilities to configure VFD,
define character set and update
firmware
-Updated Chapter 1.1, Standard items
- Added instructions to Chapter 4.2 on
installation of RFID and Biometric
(fingerprint) Reader
2010 March
5
Table of Contents
1. Item Checklist ...............................................................................................................6
1.1. Standard Items...................................................................................................6
1.2. Optional Items....................................................................................................7
2. System View.................................................................................................................9
2.1. Front View..........................................................................................................9
2.2. Rear View ..........................................................................................................9
2.3. I/O View ...........................................................................................................10
3. Drivers Installation ......................................................................................................11
3.1. Driver List.........................................................................................................11
3.2. ELO Touch Driver Installation...........................................................................12
3.3. USB VFD Driver Installation.............................................................................15
4. Peripheral Assembly and Disassembly.......................................................................16
4.1. VFD Replacement............................................................................................16
4.2. Optional Module Installation.............................................................................17
5. System Disassembly ..................................................................................................19
5.1. Opening the Rear Cover ..................................................................................19
5.2. Replacing the Scalar Board .............................................................................20
5.3. Replacing the Inverter Board ...........................................................................21
5.4. Replacing the OSD Board................................................................................21
6. Specification ...............................................................................................................22
7. Customer Display Software Commands .....................................................................23
8. OLC 15 VESA dimensions..........................................................................................52
6
1. Item Checklist
Take the system unit out of the carton. Remove the unit from the carton by holding it by the
foam inserts. The following contents should be found in the carton:
1.1.Standard Items
a.OLC15 VESA Monitor b.Power Adapter
c. Power Cord d.Driver Bank CD
e.VGA Cable f. PS/2 keyboard Cable (for PS/2 MSR
and PS/2 iButton Dallas reader)
7
g.USB Cable h. COM port cable (for RS232 MSR or
RS232 iButton Dallas reader)
1.2.Optional Items
a. Magnetic Card Reader b. iButton Dallas key reader
c. Magnetic Card +
iButton Dallas key Reader d.RFID Reader
8
e.Magnetic Card Reader +
Biometric Reader (fingerprint) f. VFD Customer Display
9
2. System View
2.1.Front View
2.2.Rear View
Touch Screen Optional MSR Module
Optional VFD Module
Ventilation
VESA Mounting Holes
Speakers
Inhaltsverzeichnis
Andere AURES Monitor Handbücher
