Aurora IPX series Bedienungsanleitung
i
Manual Number: 170302
IPX Manager Version: 2.1.40 & above
IPX Server 2.8.3 & above
IPX FPGA Firmware: 2.11.3
IPX MCU Firmware: 2.1.10
USERS GUIDE
IPX Manager
IPX Series Windows Control Software
i
User Guide
SAFETY INSTRUCTIONS
Please review the following safety precautions. If this is the first time using this model, then read this manual
before installing or using the product. If the product is not functioning properly, please contact your local
dealer or Aurora for further instructions.
The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage
inside the product that may be sufficient to constitute a risk of electric shock to anyone opening
the case. It is also used to indicate improper installation or handling of the product that could
damage the electrical system in the product or in other equipment attached to the product.
The exclamation point in the triangle is used to alert you to important operating and maintenance
instructions. Failure to follow these instructions could result in injury to you or damage to the
product.
Be careful with electricity:
Power outlet: To prevent electric shock, be sure the electrical plug used on the product power cord
matches the electrical outlet used to supply power to the Aurora product. Use only the power adapter
and power connection cables designed for this unit.
Power cord: Be sure the power cord is routed so that it will not be stepped on or pinched by heavy
items.
Lightning: For protection from lightning or when the product is left unattended for a long period,
disconnect it from the power source.
.
Also follow these precautions:
Ventilation: Do not block the ventilation slots if applicable on the product or place any heavy object on
top of it.
Blocking the air flow could cause damage. Arrange components so that air can flow freely. Ensure that
there is adequate ventilation if the product is placed in a stand or cabinet. Put the product in a properly
ventilated area, away from direct sunlight or any source of heat.
Overheating: Avoid stacking the Aurora product on top of a hot component such as a power amplifier.
Risk of Fire: Do not place unit on top of any easily combustible material, such as carpet or fabric.
Proper Connections: Be sure all cables and equipment are connected to the unit as described in this
manual.
Object Entry: To avoid electric shock, never stick anything in the slots on the case or remove the cover.
Water Exposure: To reduce the risk of fire or electric shock, do not expose to rain or moisture.
Cleaning: Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
ESD: Handle this unit with proper ESD care. Failure to do so can result in failure.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Trademarks
All trademarks in this document are the properties of their respective owners.
ii
User Guide
TABLE OF CONTENTS
INTRODUCTION........................................................................................................................1
About...............................................................................................................................................1
Features..........................................................................................................................................1
INSTALLATION .........................................................................................................................2
Cloning Installations.........................................................................................................................5
SOFTWARE OPERATION .........................................................................................................6
Launching IPX Manager ..................................................................................................................6
Connecting to QXP-2-IPX Server.....................................................................................................7
Matrix Switching ..............................................................................................................................9
Seamless Switching....................................................................................................................... 10
Video Wall ......................................................................................................................................11
Audio Switching............................................................................................................................. 13
RS-232 Routing and Control .......................................................................................................... 14
Infrared Routing............................................................................................................................. 15
USB Routing.................................................................................................................................. 16
Recalling & Saving Macros ............................................................................................................ 17
Help .............................................................................................................................................. 19
Setup............................................................................................................................................. 21
Tools.............................................................................................................................................. 22
View .............................................................................................................................................. 23
Encoder & Decoder Setup ............................................................................................................. 25
Device Settings.............................................................................................................................. 27
Search........................................................................................................................................... 33
EDID Setup and its Importance...................................................................................................... 34
Firmware Update........................................................................................................................... 36
APPENDIX 1 Troubleshooting...........................................................................................40
APPENDIX 2 Protocol ........................................................................................................41
APPENDIX 3 EULA.............................................................................................................42
1
User Guide
INTRODUCTION
About
The IPX Manager is a Windows® based software available at the Aurora customer portal on
www.auroramm.com
Always check from time to time for the latest firmware as it may have enhancements, new features, and
bug fixes.
IPX Manager allows a user to control the various capabilities of IPX series products on a network. While
the IPX manager is a client software, the IPX Server (QXP-2-IPX Server) handles all the communication
handling and is the target for all communication. This allows for centralized communications and the
ability to run many clients on a network seamlessly. In addition, 3rd party control systems can
communicate via Telnet to the Server.
Features
Matrix Switching
Seamless Matrix Switching for Progressive RGB/YCrCb 4:4:4
Video Wall Setup and Control
Audio Break-away Routing
RS-232 Routing & Control
IR (Infrared) Remote Control Routing
USB Routing
Horizontal and Vertical Viewing
Preset Store and Recall
Connection Manager
Advanced Debug Logging
Touch Screen Friendly Layout
Configuration File for Cloning Presets and Connections on Other PCs
Multi-Server connections
2
User Guide
INSTALLATION
1. Download the IPX Manager from the Aurora website customer portal. It will require a login. If
you do not have one you can register for one. http://portal.auroramultimedia.com/login
2. Unzip and launch the setup.exe
3. Read the EULA (Copy in back of manual under Appendix 4), select I agree, then Next to
continue.
3
User Guide
4. If accepted, click next for the default directory unless it is required to install in different location.
5. A prompt will appear to confirm the installation selection. Press Next if you still wish to continue.
4
User Guide
6. A progress bar will appear. Please note it will not start until Windows User Account Control
prompts for permission.
7. Once installation is finished a prompt will appear to confirm. Note at the bottom instructions to
check for any updates to the .net framework as IPX Manager uses it.
5
User Guide
Cloning Installations
The clone file IPX Manager.exe.config is located at C:\Program Files (x86)\IPX Manager\IPX Manager\. If there is an
existing installation with presets and other parameters, the clone file can be saved and used to copy over a new
installation config file. The new installation will have all the same settings.
6
User Guide
SOFTWARE OPERATION
Launching IPX Manager
With a properly installed IPX Manager there will be an Icon for the IPX Manager as shown below. Launch
the application by double clicking or single clicking (based on mouse settings).
The default starting position will appear which is in an unconnected state which is why no units will show
at this time. Note the IPX Manager firmware revision number will appear in the top header bar. The view
being shown is Horizontal view. Under the View tab it can be changed to Vertical view so objects can be
dragged left to right instead of top to bottom.
It is also important to note if it is planned to have a specific unit switch between Encoder and Decoder
mode the setup for the unit must be done once in both Encoder and Decoder mode so it is saved
accordingly.
Andere Handbücher für IPX series
1
Inhaltsverzeichnis
Andere Aurora Transceiver Handbücher
Aurora
Aurora IPX-TC3A Series Bedienungsanleitung
Aurora
Aurora IPX-TC1-F Bedienungsanleitung
Aurora
Aurora VLX-TC1-CF Bedienungsanleitung
Aurora
Aurora VLX-TC1-C Bedienungsanleitung
Aurora
Aurora VLX-TC1-C Bedienungsanleitung
Aurora
Aurora MLink Ultra Bedienungsanleitung
Aurora
Aurora IVLX-TCW2V-C Bedienungsanleitung
Aurora
Aurora IPX-TC3 Series Bedienungsanleitung
Aurora
Aurora VLX-TCW2H-C Bedienungsanleitung
