07
USER MANUAL
move to next preset l
preset#200~215,preset dwell time,the
is 5,6,7...20 sec;
according to preset order. Call specia
corresponding dwell time
(1) Call 99 preset , start 1 to 20 preset cruise;
(2) Call 88 preset, start 1 ~ 10 preset cruise;
(3) Call 89 preset, start 11 ~ 20 preset cruise;
(4) Call 90 preset, start 21 ~ 30 preset cruise;
(5) Call 91 preset, start 31 ~ 40 preset cruise;
3.6. Swing
PTZ is in a certain position via Controller Keyboard Joystick
( User set up PAN/TILT angle according to necessity ), set up
Preset#65 is left boundary,then controller keyboard joystick get
to right boundary,set up Preset#66 is right boundary, left-right
boundary of PTZ scanning
Call preset# 82 ,PTZ start point to point Swing
PTZ go to preset#66(right boundary)firstly,then in existing 2
boundaries,scanning constantly at specified speed. Call special
preset#225 ~ #229 to ensure scanning speed is level1 ~ 5;
Attention: left and right boundaris should set up at same TILT
angle,namely,2 points keep same horizontal line.If 2 boundaries
setup is
not at same horizontal line,Call preset#82,left-right
swing,
the scanning startpoint is prest#66(right boundary)
3.7. Continuous Scanning
PTZ is in a certain position via Controller Keyboard Joystick
IntelligenceIRmediumspeeddomecameraIntelligenceIRmediumspeeddomecamera
