AUSTRALIAN MONITOR ACM1202P Bedienungsanleitung

120W + 120W

Dual Channel Power Amplifier

ACM1202P

Description

The ACM1202P is a dual channel 120W + 120W power amplifier designed to deliver continu-

ous full range performance in a compact and reliable package. The ACM1202P is two inde-

pendent amplifiers in the one chassis making it the perfect choice for multi-zone or multi-chan-

nel applications.

Inputs and Outputs

The ACM1202P provides dual balanced XLR inputs (male and female) per channel. These two

inputs are wired in parallel enabling a line level “split” to be taken from the second input of

each channel.

100/70 volt line and 4/8 ohm outputs are available via the rear panel barrier strip.

Controls and Metering

A recessed input attenuation control for each channel is included on the rear panel. These pots

are accessible using a screwdriver.

The ACM1202P features a signal-present LED per channel and power-on LED.

Protection

The ACM1202P features ”slow start“ and dual AC and DC fuse protection. Also featured is

automatic speaker protection. The ACM1202P includes generous heat sinking for reliable

operation in even the most extreme conditions.

Australian Monitor Installation Series amplifiers feature a protection network that provides

greater stability and performance. Our amplifiers are recognised

worldwide for their reliability and this is due to the extensive levels of

current limiting which protect the amplifiers from both overload and

overdrive conditions.

Power Output 120 Watts per channel

Maximum Load 80 Ohms on 100 Volt line setting

Frequency Response 50Hz - 15kHz (± 3dB)

Total Harmonic Distortion 0.5% at 1kHz (1 Watt - full power)

Signal To Noise Ratio -80dB at 100V; -80dB at 8 Ohms; -80dB at 4 Ohms

Input Sensitivity 0.5 Volt RMS - 100 Volt line

Input Impedance 10K Ohms

Input Connection Active balanced input with male and female

3 pin XLR input/output sockets per channel.

Outputs 100/70 Volt line and 4/8 Ohm via rear panel barrier strip. Line out to feed

additional amplifiers from one of the paralleled XLR input sockets

Controls Front panel power switch; Recessed rear panel input attenuator (per channel)

Metering/Indicators Signal-present LED per channel

Power Source 240V - 50Hz or 110V - 60Hz (special), 3 pin IEC connector

Power Consumption 400 Watts (maximum)

Protection Fuses for overload and short circuit protection, High temperature trip (disconnects

load at 120ºC), DC Output Sensing (disconnects load if DC is present)

Dimensions/Weight 88mm H x 483mm W x 315mm D (Chassis dimensions only). 15kg

Rack Mounting Standard

Engineered and Distributed By AUDIO TELEX COMMUNICATIONS PTY LTD (ABN 78 001 345 482), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia

NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698 VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977 QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237 WA Tel: (08) 9228 4222 Fax: (08) 9228 4233

TAS Tel: (03) 6228 6373 Fax: (03) 6278 1063 SA Tel: (08) 8352 4444 Fax: (08) 8352 4488 Export Enquiries: [email protected] Website: www.australianmonitor.com.au

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The power amplifier shall be a dual channel model capable of delivering 120 watts RMS per channel

into 100/70 volt line and 4/8 ohm loads. The unit shall feature a signal-present LED per channel.

Speaker connection shall be via a rear panel barrier strip. The amplifier shall have two balanced XLR

inputs per channel, one of which can be used to feed additional power amplifiers.

The unit shall also include fuse protection for overload and short circuit conditions. The unit shall also

feature generous heatsinking for reliable operation in extreme conditions.

The unit shall be of high quality suitable for continuous, reliable performance. It shall have a frequency

response of no less than 50Hz - 15kHz (±3dB). Distortion shall not exceed 0.5% at 1kHz. The signal to

noise ratio shall be -80dB (on 100V setting) or better. The power amplifier shall be packaged in a

rugged 2 rack unit metal chassis suitable for desk or rack mounting.

The amplifier shall be an Australian Monitor Installation Series model ACM1202P.

Inhaltsverzeichnis

Andere AUSTRALIAN MONITOR Verstärker Handbücher

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR HA6 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR KA1500 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR KA800 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM604 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR Digipage JR Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM120XL Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120XL Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR Innovation IN400 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS250 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR CM500 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR SA120 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR Synergy SY400 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM120 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR IS1200 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR SA60 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120XL Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM60 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR PA800 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AV2.2P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM250 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS PRE1 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung