AUSTRALIAN MONITOR AMIS26 Bedienungsanleitung

INSTALLATION SERIES

AMIS26

2 Input, 6 Output Distribution Amplifier

Clever Features, Contractor Friendly

Installation

Operation

Manual

INPUT

INSTALLATION SERIES

AMIS26

+10dB

-10dB

0dB

-20dB

0dB 0dB

-15dB -15dB+15dB +15dB

OFF OFF OFF OFF OFF OFF0dB 0dB 0dB 0dB 0dB 0dB

OFF OFF OFF OFF OFF OFF

AAAAAABBBBBB

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

This symbol is intended to alert the user to the

presence of important operation and main-

tenance (servicing) instructions in the literature

To prevent electric shock do not use this (polarized) plug

with an extension cord, receptacle or other outlet unless

the blades can be fully inserted to prevent blade ex-

To prevent electric shock, match wide blade of plug to

shock to persons.

accompanying the appliance.

posure.

wide slot, fully insert.

Caution:

WARNING !

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

INSTALLATION SERIES

Australian Monitor

AUS, EUR, USA

Rev A: 3rd Dec 2003

Internal Revision Info

Rev 1 24/11/03

Rev 2 28/11/03

Rev 3 02/12/03

CONTENTS

Page

1. Introduction 4

2. Front Panel 5

3. Back Panel 6

4. Internal Adjustment 7

5. Block Diagram 9

6. Dimensions 10

7. Specifications 11

INSTALLATION SERIES

Australian Monitor

1. INTRODUCTION

The Australian Monitor Installation Series AMIS26 is a high quality 2 input, 6 output distribution

amplifier. The AMIS26's 2 inputs can be balanced or unbalanced and each input's sensitivity

can be switched between Mic and Line level. 24 VDC Phantom power is individually

switchable per input and for ease of setup, a four segment LED level meter is provided per

input. Each of the AMIS26's inputs is individually assignable to any of the 6 outputs via front

panel DIP switches. Outputs can be balanced or unbalanced and feature up to 30dB of

attenuation, so they can be run as any combination of line level or mic level outputs. Ample

label space is provided for both inputs and outputs and the AMIS26 is powered via a supplied

24VDC power supply. The AMIS26 provides a low noise, feature packed, signal routing

solution to cover a wide range of installation needs at a contractor friendly price.

INSTALLATION SERIES

Australian Monitor

INSTALLATION SERIES

Australian Monitor

1 2 4

2. FRONT PANEL

1. INPUT LEVEL CONTROL(S)

2. LEVEL METER

3. OUTPUT SECTION

3a. OUTPUT LEVEL CONTROLS

3b. INPUT ASSIGN SWITCHES

4. POWER LED

The input level controls are screwdriver adjustable trim pots. The input level controls can

boost or cut the input signal by up to 15dB.

These 4 segment LED meters show the strength of each of the AMIS26's input signals. LED

segments are calibrated to the following level markings and show the following colours:

-20dBu (green)

-10dBu (green)

0dBu (yellow)

+10dBu (red)

The output level controls are screwdriver adjustable trim pots. These level controls

attenuate the output level, with a range from -60dB at 'Minimum” position to 0dB at

“Maximum” position.

These recessed DIP switches assign input A and input B to a desired output.

This blue LED indicates the unit is powered “on”.

INPUT

INSTALLATION SERIES

AMIS26

+10dB

-10dB

0dB

-20dB

0dB 0dB

-15dB -15dB+15dB +15dB

OFF OFF OFF OFF OFF OFF0dB 0dB 0dB 0dB 0dB 0dB

OFF OFF OFF OFF OFF OFF

AAAAAABBBBBB

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6

Expanded view

INSTALLATION SERIES

Australian Monitor

3. BACK PANEL

1. INPUT A/B CONNECTORS

2. OUTPUT CONNECTORS

3. 24VDC POWER CONNECTOR

4. EARTH Stud

The balanced XLR inputs can be used as Mic or Line level inputs and are switched

between input sensitivities via internal DIP switches accessed through the lid (see internal

adjustments section page 7). The dual RCA inputs are Line level inputs only and are

internally summed to mono.

The AMIS26's outputs can be either balanced XLR or unbalanced dual RCA's. Both these

outputs can be switched between Mic level & Line level via internal DIP switches accessed

through the lid (see internal adjustments section page 7).

This 2.1mm connector accepts power from the provided 24VDC power supply.

In some circumstances it may be necessary to ground the unit to eliminate noise in the

system. This can be done by using this earth stud.

OUTPUT 6 OUTPUT 5 OUTPUT 4 OUTPUT 3 OUTPUT 2 OUTPUT 1 INPUT B INPUT A

EARTH DC INPUT

+24VDC

+ve

ENGINEERED BY AUDIO TELEX COMMUNICATIONS PTY LTD IN SYDNEY, AUSTRALIA

XLR

1 = Ground

2 = + Signal

3 = - Signal

RCA & XLR OUTPUTS ARE INTERNALLY SWITCHABLE BETWEEN MIC/LINE LEVEL

RCA INPUTS ARE LINE LEVEL

XLR INPUTS ARE INTERNALLY SWITCHABLE BETWEEN MIC/LINE LEVEL

PIN 2

HOT

PIN 3

COLD

PIN 1

GND

PIN 2

HOT

PIN 3

COLD

PIN 1

GND

FEMALE XLR MALE XLR

NOTE: This stud provides a connection to chassis ground. Audio ground is internally

tied to chassis ground.

INSTALLATION SERIES

Australian Monitor

4. INTERNAL ADJUSTMENT

1. Input Sensitivity DIP Switches.

DIP1 (INPUT A), DIP3 (INPUT B)

Switches 1, 2

2. Phantom Power Switch.

DIP1 (INPUT A), DIP3 (INPUT B)

Switch 3

Switches 1 and 2 on this 3 pole DIP switch when

selected to the “on” position will switch the

balanced XLR input to Mic level. The “off” position

will switch the balanced XLR input to Line level. The

Default setting is Line level.

This switch will enable 24VDC phantom power to

the desired input. The default setting is “off”.

NOTE: This switch does not effect the sensitivity of

the unbalanced dual RCA input.

NOTE: Before switching Phantom power on please ensure that no line level source

equipment is connected to the effected input.

NOTE: The following adjustments involve access to the inside of the AMIS26 and should

only be attempted by a qualified technician. All internal adjustments are

accessible through the lid of the AMIS26. Always turn off the DC power and

remove the DC power cord before accessing the inside of the AMIS26.

123

DIP 1 DIP 3 DIP 2 DIP 4 DIP 5

Input 1

Line Level - Switch 1, 2 OFF

Mic Level - Switch 1, 2 ON

Phantom Power (24V)

Switch 3 ON/OFF

Line Level Output 1 - Switch 1 OFF

Mic Level Output 1 - Switch 1 ON

Line Level Output 2 - Switch 2 OFF

Mic Level Output 2 - Switch 2 ON

Line Level Output 3 - Switch 1 OFF

Mic Level Output 3 - Switch 1 ON

Line Level Output 4 - Switch 2 OFF

Mic Level Output 4 - Switch 2 ON

Line Level Output 5 - Switch 1 OFF

Mic Level Output 5 - Switch 1 ON

Line Level Output 6 - Switch 2 OFF

Mic Level Output 6 - Switch 2 ON

Input 2

Line Level - Switch 1, 2 OFF

Mic Level - Switch 1, 2 ON

Phantom Power (24V)

Switch 3 ON/OFF

123

DIP 1

Input 1

Line Level - Switch 1, 2 OFF

Mic Level - Switch 1, 2 ON

Phantom Power (24V)

Switch 3 ON/OFF

INSTALLATION SERIES

Australian Monitor

NOTE: This switch effects both balanced XLR & dual RCA outputs.

3. Output Level DIP switch.

DIP 2 Switch 1 (OUTPUT 1)

DIP 2 Switch 2 (OUTPUT 2)

DIP 4 Switch 1 (OUTPUT 3)

DIP 4 Switch 2 (OUTPUT 4)

DIP 5 Switch 1 (OUTPUT 5)

DIP 5 Switch 2 (OUTPUT 6)

This switch will change the output sensitivity of the

desired output from Mic to Line level. When the

switch is “on” the output level will be switched to

Mic level.

DIP 2

Line Level Output 1 - Switch 1 OFF

Mic Level Output 1 - Switch 1 ON

Line Level Output 2 - Switch 2 OFF

Mic Level Output 2 - Switch 2 ON

INSTALLATION SERIES

Australian Monitor

5. BLOCK DIAGRAM

-37dB PAD

SW1,2

P/P 24V

SW3

-37dB PAD

SW1,2

P/P 24V

SW3

DIP SW

RCA

XLR

INPUT A

INPUT B

+37dB

-15dB

+15dB

+10dB

0dB

-10dB

-20dB

CONTROL

INPUT

GAIN

INPUT

GAIN

OUTPUT

VOLUME

OUTPUT

VOLUME

OUTPUT

VOLUME

OUTPUT

VOLUME

OUTPUT

VOLUME

OUTPUT

VOLUME

-30dB

0dB

XLR

RCA

0dB

OUTPUT 1

OUTPUT 2

OUTPUT 3

OUTPUT 4

OUTPUT 5

OUTPUT 6

INSTALLATION SERIES

Australian Monitor

6. DIMENSIONS

4.00 mm

164.00 mm

INPUT

INSTALLATION SERIES

AMIS26

+10dB

-10dB

0dB

-20dB

0dB 0dB

-15dB -15dB+15dB +15dB

OFF OFF OFF OFF OFF OFF0dB 0dB 0dB 0dB 0dB 0dB

OFF OFF OFF OFF OFF OFF

AAAAAABBBBBB

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6

466.00 mm

482.00 mm

44.00 mm

32.00 mm

OUTPUT 6 OUTPUT 5 OUTPUT 4 OUTPUT 3 OUTPUT 2 OUTPUT 1 INPUT B INPUT A

EARTH DC INPUT

+24VDC

+ve

ENGINEERED BY AUDIO TELEX COMMUNICATIONS PTY LTD IN SYDNEY, AUSTRALIA

XLR

1 = Ground

2 = + Signal

3 = - Signal

RCA & XLR OUTPUTS ARE INTERNALLY SWITCHABLE BETWEEN MIC/LINE LEVEL

RCA INPUTS ARE LINE LEVEL

XLR INPUTS ARE INTERNALLY SWITCHABLE BETWEEN MIC/LINE LEVEL

443.0 mm

Andere Handbücher für AMIS26

Inhaltsverzeichnis

Andere AUSTRALIAN MONITOR Verstärker Handbücher

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS1202P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR Digipage JR Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM604 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120XL Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM2151 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM1202P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS AMC30 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC120 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR XA1000 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR DCM250 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120XL Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS HA4 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR PA1500 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM120XL Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC+120P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR HS60 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMD2100P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC120 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS PRE1 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR SA60 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR IC30 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR IC30 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR Synergy SY400 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM120 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung