AuthenTrend ATKey Bedienungsanleitung
1
Quick Guide for
ATKey with RSA SecurID Access
Rev. 1.0
2
RSA SecurID Access supports using FIDO2-Certified and U2F-compliant security keys -
ATKey.Card (USB/BLE/NFC) and ATKey.Pro (USB) as an authentication option.
4
Step 3
Fingerprint matching for authentication
Step 2
Set Up FIDO Token
Step 1
Enroll fingerprint to ATKey
| 3 Steps
Standalone enrollment
Enroll via Windows 10
Settings
(build 1903 or later version)
Enroll via ATKey App
Enroll via Chrome Canary
(Mac, Chromebook, Linux or
Windows 10 build earlier than
1903)
or
or
or
Register ATKey in RSA SecurID
Access My Page
Setting Up Cloud
Authentication Service for
Security Keys
and / or
Authenticate to a protected
application using your ATKey
Authenticate to a login using
your ATKey
Please enroll your fingerprint first!!
5
| (Step 1) Fingerprint Enrollment (up to 10x fingerprints)
•Insert ATKey.Pro into USB port
•Check Youtube video here for the detail:
https://youtu.be/lDrcZxWXAL4
•LED is BLUE ON, quick click side-button 3x
times (by nail) to go into enrollment mode:
•If there is no any fingerprint enrolled, LED
turns to WHITE
•If there are any enrolled fingerprints,
LED is GREEN flashing, please verify
enrolled fingerprint to start enrolling
new finger
•Put your specific finger on sensor, touch and
lift your finger (LED is WHITE flashing, from
slow to faster), repeat it more than 12 times
till LED shows GREEN (13th time), then your
fingerprint is enrolled
•If you want to quit from standalone
enrollment, click button once, LED will turn to
Blue, back to normal state.
•If your OS is Windows 10 build 1903 or later
versions, you can manage ATKey as security key
•PIN code, add/delete fingerprints, reset
•jump to “Windows Settings” page for the detail
•Windows Settings => System => About
•Download “ATKey for Windows” app from
Windows Store to manage ATKey:
•Enroll fingerprint
•Add/delete fingerprint
•ATKey information
•Companion ATKey to Windows (Windows
Hello login)
•Firmware upgrade
•Search “ATKey” or “AuthenTrend” from
Windows Store to find the app, download
and install
•Jump to “ATKey for Windows” for the detail
Standalone enrollment Enroll from Windows Settings Enroll from ATKey for Windows app
6
| (Step 1) Windows Settings (OS build is 1903 or later version) –Enroll fingerprint
•Windows Settings => Account => Sign-in options => Security Key => add “PIN code” and enroll “Fingerprints”
Click “Manage”,
touch fingerprint sensor to setup
Add “Security Key PIN” first;
this PIN code will write into
ATKey.Pro
•Setup “Security Key
Fingerprint”
•Type-in PIN code, following
screen hint to enroll
fingerprint, until “All Set!”
7
| (Step 1) Windows Settings (OS build is 1903 or later version) –Reset Key
•Windows Settings => Account => Sign-in options => Security Key => Reset Security key (Delete PIN code and erase all fingerprints)
1. Cyan LED is flashing
2. Remove ATKey.Pro and re-insert to
USB port
3. Cyan LED is flashing
4. Touch by any finger to reset or
cancel it - please make it done
(Reset) within 10 sec
1. Blue LED is flashing
2. Remove ATKey.Pro and re-insert to
USB port
3. Blue LED is flashing
4. Touch by any finger to reset or
cancel it - please make it done
(Reset) within 10 sec
Click “Process”
[firmware 1.00.6 or later version] [firmware 1.00.5 or previous version]
Microsoft required spec.- for authenticator reset: in order to prevent
accidental trigger of this mechanism, user presence is required. In case of
authenticators with no display, request MUST have come to the
authenticator within 10 seconds of powering up of the authenticator.
8
| (Step 1) App “ATKey for Windows” – Enroll fingerprint
•Launch “ATKey for Windows” app (version 2.0.57.0 or later version)
•Click “Add and Register ATKey” –please make sure ATKey.Pro inserts to USB port and LED shows blue ON
Click to refresh the page
around 12 times touch/enroll to finish ONE fingerprint enrollment
Verify enrolled fingerprint to confirm
ATKey.Pro fingerprint enrolled and
register for management by app
Default name is -: ATKey.Pro + Keycode
9
| (Step 1) App “ATKey for Windows” – Key Management
•ATKey management –information, rename, firmware upgrade
•“Check for Update”
•Select encrypted firmware image to upgrade manually
•Please wait till 100% done, then plug ATKey.Pro off USB port; re-insert to USB port,
waiting ~15 sec to boot to new firmware (LED from White to Blue ON).
•read firmware version here
•Read “keycode” here
10
| (Step 1) for non-Windows Users
•If you are using non-Windows 10, or your Windows 10 is earlier than build 1903
•Enroll fingerprint into ATKey.Pro via
•Standalone enrollment
•Or Chrome Canary (https://www.google.com/chrome/canary/)
•Here is quick guide for Chrome Canary:
From “Settings” =>
“Privacy and security”
User presence needs - touch dongle by any finger
Assign PIN code into the key
Andere AuthenTrend IP-Zugriffskontrollsysteme Handbücher
