REPLACEMENT TRANSMITTER
Model 7142A 1-way 4-button Supercode Remote Control
Remote Control RF learning:
1. Open vehicle door.
2. Turn the key to the On position.
3. Press/release once and then press/hold the
Control Button on the system's Control Center.
The status LED begins flashing in a sequence of
one flash, the horn/siren sounds once to confirm
system is ready for pairing. The button can be
released
4. Press/hold the remote
button until the transmit
LED turns on solid (10 seconds). The horn/siren
emits 1 sound to confirm learning.
5. Repeat for each remote to be learned (up to four).
6. Turn the ignition off or wait 60 second to exit
learning, the horn/siren emits 2 sounds to confirm.
Standard Configuration
The lock button arms/locks the system.
The unlock button disarms/unlocks the
system.
AUX The AUX button operates Trunk Release.
This button operates remote start.
Refer to the Owner’s Guide for more details.
FCC/ID Notice
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
CAUTION! Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's author-
ity to operate this device.
Menu Table
Item Function
1 sound/flash Auto learn new remote
2 sounds/flashes Delete remotes
©2019 Directed. Vista, CA 92081. All rights reserved.
MADE IN TAIWAN
P/N 7142A 01/19
560-10083 (R1.0)
WARNING:
This product can expose you to chemicals including
DEHP, which is known to the State of Califotrnia to
cause cancer and birth defects or other reproductive
harm. For more information, go to www.P65Warnings.
ca.gov
