AUTO-XS STR-JS688B Bedienungsanleitung

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

02 Introduction

03 General Information and Safety Instructions

05 Assembly and Parts List

06 Getting Started

07 Features

07 How to Operate

09 Other Useful Information

10 arranty Card

Contents

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

Congratulations!

You have made an excellent choice with the purchase of the quality AUTO-XS® product.

By doing so you now have the assurance and peace of mind which comes from purchasing a

product that has been manufactured to the highest standards of performance and safety,

supported by the high quality standards of ALDI.

e want you to be completely satisfied with your purchase so this AUTO-XS® product is backed

by a comprehensive manufacturer’s 1 year warranty and an outstanding after sales service

through our dedicated Helpline.

e hope you will enjoy using your purchase for many years to come.

If you require technical support or in the unlikely event that your purchase is faulty please

telephone our Helpline for immediate assistance. Faulty product claims made within the 1 year

warranty period will be repaired or replaced free of charge provided that you have satisfactory

proof of purchase (keep your receipt safe!). This does not affect your statutory rights. However,

be aware that the warranty will become null and void if the product is found to have been

deliberately damaged, misused or disassembled.

Introduction

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

PLEASE READ AND SAVE ALL INSTR CTIONS TO ENS RE THE SAFE AND EFFECTIVE SE OF THE J MP STARTER.

•Read and follow the instructions published by the vehicle’s battery manufacturer and the manufacturer of any

equipment you intend to use in the vicinity of the battery. Review all caution markings on these products and on

the engine.

•DO NOT allow the positive (red) and negative (black) booster clamps of the Jump starter to come into contact with

each other or a common piece of metal at any time. Sparking, explosion, or damage to the unit may result. The

safety switch should be off at all times except when using the Jump Starter to re-start your battery (see

instructions).

•hen jump starting a vehicle, make sure that the positive and negative booster clamps are properly connected to

the vehicle and the battery. Failure to connect the clamps properly may cause sparking, an explosion, or damage

to the unit.

•DO NOT smoke or allow a spark or flame near the vehicle’s battery and engine.

•AL AYS wear eye protection when working with batteries.

•KEEP THIS JUMP STARTER OUT OF REACH OF CHILDREN.

•If battery acid comes into contact with eyes, flush the eyes with water for at least 10 minutes and seek medical

attention immediately.

•Never operate this unit near any flammable gasses, liquids, or near an open flame.

•If skin or clothing comes into contact with battery acid, immediately wash the affected area with soap and water

and seek medical attention.

•Be sure to remove all metal items (watches, necklaces, rings, etc,) before using the Jump Starter.

•DO NOT expose the Jump starter to moisture.

•DO NOT use the Jump Starter in extremely hot conditions.

•Always turn the Safety Switch off when not in use.

•DO NOT open the Jump Starter. There are no serviceable parts in this unit. If you do open this unit up you will void

the warranty.

•Only charge the unit with the 120V AC charger supplied with the unit.

•Keep this unit away from any sources of moisture or humidity such as rain or snow.

•Only use the 12V outlet with 12V accessories.

SAVE THESE

INSTR CTIONS!

General Information

General Information General Information

General Information

and Safety Instructions

and Safety Instructionsand Safety Instructions

and Safety Instructions

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

WARNING!

WARNING!WARNING!

WARNING!

Read and understand all instructions. Failure to follow all instructions listed below may result in

electric shock fire or serious personal injury. The warnings cautions and instructions discussed in this

instruction manual cannot cover all possible conditions and situations that may occur. It must be understood

by the operator that common sense and caution are a factor which cannot be built into this product but must

be supplied by the operator.

READ AND SAVE ALL INSTRUCTIONS!

READ AND SAVE ALL INSTRUCTIONS!READ AND SAVE ALL INSTRUCTIONS!

READ AND SAVE ALL INSTRUCTIONS!

ELECTRIC POWER

ELECTRIC POWERELECTRIC POWER

ELECTRIC POWER

If the electric circuit is overloaded with other appliances your Jump Starter may not operate properly. The

Jump Starter should be operated on a separate electrical circuit from other operating appliances.

SAFETY WARNING

SAFETY WARNINGSAFETY WARNING

SAFETY WARNING

Although your Jump Starter is easy to operate for your safety the warnings below must be followed:

1. Do not place the Jump Starter near a heat source.

2. Never leave the Jump Starter unattended while connected to the electrical outlet.

3. Use the Jump Starter on a stable surface away from water.

4. Do not unplug the Jump Starter by pulling on the power supply cord.

5. The Jump Starter must be unplugged:

A. Before any cleaning or maintenance.

B. After charging.

C. If it appears to be faulty.

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS!

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

Main Parts

Main PartsMain Parts

Main Parts

Front Back

Rubber Insulated Handle

Insulated Jump Starter Cables Booster Clamp Holders

120V AC/DC Adapter 12V Car Charging Adapter

Contents of Packaging

Contents of PackagingContents of Packaging

Contents of Packaging

•Jump Starter

•120V AC/DC Adapter

•12V Car Charging Adapter

•Instruction Manual

If any of the above items are missing please contact our customer service department at 1-888-367-7373

or email us at customer-service@wk-usa.com for replacements. Our business hours are Mon-Fri 9:00 AM -

4:00 PM CST.

Assembly and Parts List

Assembly and Parts ListAssembly and Parts List

Assembly and Parts List

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

Before Each

Before EachBefore Each

Before Each

Use

UseUse

Use

CHARGING THE BATTERY

CHARGING THE BATTERYCHARGING THE BATTERY

CHARGING THE BATTERY

The Jump Starter has a built in rechargeable battery. Although it arrives partially charged from the factory we

recommend that you fully charge it before the first use.

Charging Socket Red Charging Light

•Plug the AC/DC Adapter into the power outlet and then plug the opposite end into the charging socket.

The red LED light above the charging socket will illuminate to show that the unit is charging. When the

light changes color to green the battery is fully charged and should be disconnected from the power

outlet.

•DO NOT continuously charge the unit for more than 36 hours.

•Use ONLY the power cords provided with this unit. Otherwise you may damage the unit and void the

warranty.

•Charge this unit between 6-12 hours after each use and every 2 months unless the LED lights indicate

otherwise.

•

To recharge with the Car Charging Adapter plug the small end into the charging socket and the other

end into your vehicle’s cigarette lighter socket or 12V power port. Full charging will take approximately

6-12 hours. NOTE: Some vehicle’s cigarette lighters and 12V power ports do not operate unless the

ignition switch is in the accessory position.

Getting Started

Getting StartedGetting Started

Getting Started

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

Features

FeaturesFeatures

Features

Battery Safety Switch

Battery Safety SwitchBattery Safety Switch

Battery Safety Switch

LED Work Light

LED Work LightLED Work Light

LED Work Light

Internal

InternalInternal

Internal

Battery Level Indicator

Battery Level Indicator Battery Level Indicator

Battery Level Indicator

12V Power Outlet

12V Power Outlet12V Power Outlet

12V Power Outlet

Battery Test Switch

Battery Test Switch Battery Test Switch

Battery Test Switch

Charging Socket Light Switch

Charging Socket Light SwitchCharging Socket Light Switch

Charging Socket Light Switch

USB Port and Indicator

USB Port and IndicatorUSB Port and Indicator

USB Port and Indicator

USB Switch

USB SwitchUSB Switch

USB Switch

How to Operate

How to Operate How to Operate

How to Operate

BATTERY STATUS

BATTERY STATUSBATTERY STATUS

BATTERY STATUS

Press and hold the battery test switch on the front of the unit when the battery is not charging. The battery level

indicator lights will illuminate to indicate the amount of charge remaining in the Jump Starter.

•When the battery is fully charged the green High indicator will light up.

•When the battery is at 50% or lower only the yellow Low indicator will light up.

•When the battery must be recharged only the red indicator will light up. You must recharge the Jump

Starter before using it.

JUMP START AN EN

JUMP START AN ENJUMP START AN EN

JUMP START AN ENGINE

GINEGINE

GINE

If your vehicle’s battery is too weak to start your car you can use the Jump Starter to start it.

•Make sure all the accessories in your vehicle are turned off (lights radio AC heater etc.).

•Make sure there are no 12V accessories attached to the Jump Starter and that the work light is turned

off.

•Securely connect the RED positive (+) booster clamp to the corresponding positive (+) terminal of your

vehicle’s battery.

•Securely connect the BLACK negative (-) booster clamp to a grounding point such as the metal of the

vehicle frame as far away from the battery as possible. DO NOT connect the clamp to the negative (

DO NOT connect the clamp to the negative (DO NOT connect the clamp to the negative (

DO NOT connect the clamp to the negative (-

) )

)

battery terminal.

battery terminal.battery terminal.

battery terminal.

•Turn the battery safety switch to the ON position. Start your vehicle.

•Once the vehicle has started turn the battery safety switch to the OFF position disconnect the black

booster clamp first and then disconnect the red booster clamp from the battery.

•NOTE: if your vehicle does not start within 10 seconds allow the Jump Starter internal battery to cool for

3 minutes before attempting to start the vehicle again.

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

OPERATING THE ACCESSORIES

OPERATING THE ACCESSORIESOPERATING THE ACCESSORIES

OPERATING THE ACCESSORIES

•The 12V power port will operate most 12V accessories with a draw of 10 amps or less. When fully

charged the Jump Starter will power a 10 amp accessory for 20-40 minutes a 6 amp accessory for

approximately 40-60 minutes and a 4 amp accessory for approximately 1 ½-2 hours.

•To power your 12V accessory plug the large end in to the 12V power outlet port.

OPERATING THE WORK LIGHT

OPERATING THE WORK LIGHTOPERATING THE WORK LIGHT

OPERATING THE WORK LIGHT

The Jump Starter is equipped with an LED work light. Simply press the light switch to turn the light ON or OFF.

OPERATING THE USB PORT

OPERATING THE USB PORTOPERATING THE USB PORT

OPERATING THE USB PORT

The Jump Starter is equipped with a USB port. Plug the USB end of your adapter into the USB port and press the

USB switch. The USB Indicator light will illuminate.

REPLACING THE FUSE

REPLACING THE FUSEREPLACING THE FUSE

REPLACING THE FUSE

If the fuse needs to be replaced unscrew the fuse turning the knob counter-clockwise. Gently pull on the fuse

and replace it with a 15 Amp fuse. Insert the fuse gently into the knob and place it back into the fuse

receptacle. Turn the knob clockwise to secure the fuse in place.

AFTER SALES SUPPORT

1 888 367 7373 customer-service@wk-usa com 12-18-13 / STR-JS688B

Technical Specifications

Technical SpecificationsTechnical Specifications

Technical Specifications

Model Number STR-JS688B

Rating Voltage 12V DC

Battery (built in) 12V sealed lead acid rechargeable battery

DC Output 12V

Starting Amps 300 Amps

Peak Amps 600 Amps

Fuse 15 Amps

Maintenance

Maintenance Maintenance

Maintenance

STORING

STORINGSTORING

STORING

Store the Jump Starter in a dry location. Do not place any heavy items on top of the unit during storage as

this may result in possible damage. Recharge the battery every 2 months if not used.

Service Center

Service Center Service Center

Service Center

If you have any questions in regards to the operation of this Jump Starter please contact our service center

at:

Wachsmuth & Krogmann Inc.

Tel: 1-888-367-7373 Email: customer-service@wk-usa.com

(Business hours Mon - Fri 9:00 AM - 4:00 PM CST)

Environmental Protection

Environmental Protection Environmental Protection

Environmental Protection

If the Jump Starter should no longer work at all please make sure that it is disposed of in an

environmentally friendly way.

Other Useful Information

Other Useful InformationOther Useful Information

Other Useful Information

Inhaltsverzeichnis

Andere AUTO-XS Fernstartsystem Handbücher

AUTO-XS

AUTO-XS 44266 Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch