Automationdirect.com Productivity 1000 P1-16CDR Bedienungsanleitung

Sales 800-633-0405 www.productivity1000.com

P1-16CDR

INPUTSOUTPUTS

24VAC/VDC IN

RELAY OUTPUT

1000

P1-16CDR Discrete Input / Relay

Output

The P1-16CDR Discrete Input / Relay Output

Module provides eight 24VAC/VDC inputs

and eight relay outputs for use with the

Productivity1000 system.

Output

Specifications . . . . . . . . . . . . . . . . . . . . . . . . .

Module

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .

Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wiring

Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Schematic

& Wiring Diagram . . . . . . . . . . . . . . . . . . .

General

Specifications . . . . . . . . . . . . . . . . . . . . . . . .

rminal Block Specifications . . . . . . . . . . . . . . . . . . .

rning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

erminal Block sold separately, (see wiring options on page 3).

rranty: Thirty-day money-back guarantee. Two-year limited

replacement (See www

.productivity1000.com for details).

Input Specifications

Inputs per Module

8 (sink/source)

Rated Voltage

24VAC/VDC

Operating Voltage Range

20.4–27.6 VAC/VDC, Max 27.6 VAC, 30VDC

AC Frequency

47–63 Hz

Input Current

8mA @ 24VAC/VDC

Maximum Input Current

10mA @ 27.6 VAC, 30VDC

Minimum ON Current

2.5 mA

Maximum OFF Current

0.5 mA

ON Voltage Level

>9.5 VDC, >8VAC

OFF Voltage Level

<4.5 VDC, <4VAC

OFF to ON Response

AC: 10ms DC: 6ms

ON to OFF Response

AC: 20ms DC: 10ms

Status Indicators

Logic Side (8 points)

Commons

1 (8 points/common)

Output Specifications

Outputs per Module 8

Rated Voltage 6–30 VDC

6–120 VAC

Operating Voltage Range 5–30 VDC

5–144 VAC

Output Type Relay, Form A (SPST)

AC Frequency 47–63 Hz

Maximum Output Current

1A / point, 8A / common for both AC and DC

1A / point, 8A / common for both is used with

ZIPLink Cable

Minimum Load Current 5mA @ 5VDC

Maximum Inrush Current 5A for 10ms

OFF to ON, ON to OFF Response 10 ms

Status Indicators Logic Side (8 points)

Commons

1 (8 points/common)

Maximum Applicable Fuse 8A

2Tech Support 770-844-4200www.productivity1000.com

QR Code

Use any QR Code reader application to

display the module’s product insert.

P1-08TD1

12345678910

24V

12- 24VDC

+ -

12345678910

24V

12- 24VDC

+ -

DualPower Source

SinglePower Source

3.3- 24VDC

P1-08TD1 Wiring Diagram

Module Installation

WARNING: Do not add or remove modules with

field power applied.

Step One: With latch

in “locked” position, align

connectors on the side of

each module and stack

by pressing together.

Click indicates lock is

engaged.

Step Three: To unstack modules, pull

locking latch up into the unlocked position

and then pull modules apart.

Step Two: Attach field wiring using

the removable terminal block or ZIPLink

wiring system.

WIRE STRIP

LENGTH

MIN

MAX

P1-08TD1

UNLOCK

LOCK

Check all latches are

secure after modules

are connected.

Sales 800-633-0405 www.productivity1000.com

Wiring Options

1ZIPLink Feed Through Modules and Cables¹

0.5 m (1.6 ft) cable

1.0 m (3.3 ft) cable

2.0 m (6.6 ft) cable

ZL-RTB20

ZL-RTB20-1

ZL-P1-CBL18

ZL-P1-CBL18-1

ZL-P1-CBL18-2

Terminal Block with pigtail cable

1.0 m (3.3 ft) cable

2.0 m (6.6 ft) cable

ZL-P1-CBL18-1P

ZL-P1-CBL18-2P

3Screw Terminal Block only

P2-RTB

(Quantity 1)

4Spring Clamp Terminal Block only

P2-RTB-1

(Quantity 1)

5Accessories²

ZL-RTB-COM

TW-SD-SL-1

TW-SD-MSL-1

ZL-RTB20

ZL-RTB20-1

1.Cable + ZIPLink Module = Complete System

2. ZL-RTB-COM provides a common connection point for power or ground

= Complete S

ste

acommon connec

on p

or pow

P1-16CDR Schematic and Wiring Diagram

24VAC

50–60 Hz

EXTERNAL

FUSE

RECOMMENDED

6–24 VDC

6–120 VAC

50–60 Hz

12345678910 11 12 1813 14 15 16 17

24VDC

6–24 VDC

6–120 VAC

50 –60 Hz

User Supplied

External Fuse

INPUT

COM

Internal Module Circuitry

Optical Isolator

24VDC

24VAC

Equivalent Input Circuit

Equivalent Output Circuit

4Tech Support 770-844-4200www.productivity1000.com

Document Name Edition/Revision Date

P1-16CDR-DS 3rd Edition 9/17/2019

Terminal Block Specifications

Part Number P2-RTB P2-RTB-1

Positions 18 Screw Terminals 18 Spring Clamp Terminals

Wire Range

30–16 AWG (0.051–1.31 mm²)

Solid / Stranded Conductor

3/64 in (1.2 mm) Insulation Max.

1/4 in (6–7 mm) Strip Length

28–16 AWG (0.081–1.31 mm²)

Solid / Stranded Conductor

3/64 in (1.2 mm) Insulation Max.

19/64 in (7–8 mm) Strip Length

Conductors “USE COPPER CONDUCTORS, 75ºC” or equivalent.

Screw Driver 0.1 in (2.5 mm) Maximum*

Screw Size M2 N/A

Screw Torque 2.5 lb·in (0.28 N·m) N/A

WARNING: To minimize the risk of potential safety problems, you should

follow all applicable local and national codes that regulate the installation

and operation of your equipment. These codes vary from area to area and

it is your responsibility to determine which codes should be followed, and

to verify that the equipment, installation, and operation are in compliance

with the latest revision of these codes.

Equipment damage or serious injury to personnel can result from

the failure to follow all applicable codes and standards. We do not

guarantee the products described in this publication are suitable for

your particular application, nor do we assume any responsibility for your

product design, installation, or operation.

If you have any questions concerning the installation or operation of

this equipment, or if you need additional information, please call Technical

Support at 770-844-4200.

This publication is based on information that was available at the time

it was printed. At AutomationDirect.com®we constantly strive to improve

our products and services, so we reserve the right to make changes to

the products and/or publications at any time without notice and without

any obligation. This publication may also discuss features that may not be

available in certain revisions of the product.

*Recommended Screw Driver TW-SD-MSL-1

*See CE Declaration of Conformance for details.

General Specifications

Operating Temperature 0° to 60°C (32° to 140°F)

Storage Temperature -20° to 70°C (-4° to 158°F)

Humidity 5 to 95% (non-condensing)

Environmental Air No corrosive gases permitted

Vibration IEC60068-2-6 (Test Fc)

Shock IEC60068-2-27 (Test Ea)

Field to Logic Side

Isolation 1800VAC applied for 1 second

Insulation Resistance >10M@ 500VDC

Heat Dissipation 2730mW

Enclosure Type Open Equipment

Module Location Any I/O position in a Productivity1000 System.

Field Wiring Use ZIPLink Wiring System or removable terminal block

(sold separately). See “Wiring Options” on page 3.

EU Directive

See the “EU Directive” topic in the Productivity Suite Help

File. Information can also be obtained at:

www.productivity1000.com

Connector Type

(sold separately) 18-Position Removable Terminal Block

Weight 88g (3.2 oz)

Agency Approvals

UL 61010-1 and UL 61010-2-201 File E139594, Canada

& USA

CE (EN 61131-2 EMC, EN 61010-1 and EN 61010-2-201

Safety)*

Andere Automationdirect.com Steuereinheit Handbücher

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08TD2P Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16TA Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-15TD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 1000 P1-15TD1 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Stride SIOL-EI8B Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity P1-04DAL-1 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 1000 P1-08TD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com HX-ECOM Series Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16TR Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08TD1S Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08TD2S Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 1000 P1-16TR Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-32ND3-1 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16DA-1 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08DA-2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com GSDA-CM-8 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 1000 P1-08TRS Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL06 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-04DAL-2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-SCM Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-15TD1 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16DAL-2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-04DA Bedienungsanleitung

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08DA-1 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung