AvaLAN AW58100HTP-PAIR Bedienungsanleitung

User’s ManUal

Industrial-grade, long-range wireless Ethernet systems

AvaLAN

WIRELESS

5.8 GHz Outdoor 100 Mbps

Wireless Ethernet Bridge

AW58100HTP-PAIR

AW58100HTP-PAIR User’s Manual

PAGE 2

Technical Support (650) 384-0000 www.avalanwireless.com

Revision 09.26.2012

125A Castle Drive

Madison, AL 35758

Sales: (866) 533-6216

Technical Support: (650) 384-0000

Customer Service: (650) 641-3011

Fax: (650) 249-3591

Thank you for your purchase of this member of the 5.8 GHz Outdoor 100 Mbps family

of wireless Ethernet radios.

The AW58100HTP-PAIR is a pre-congured point-to-point Bridge consisting of two

radios with dual cross-polarized 23 dBi at panel directional antennas. It serves

as a transparent point-to-point bridge, providing a virtual LAN cable over a long

distance.

The AW58100HTP-PAIR includes:

• (1) AW58100HTP-AP High Power Access Point Radio

• (1) AW58100HTP-SU High Power Subscriber Unit Radio

• (2) Heavy Duty Pole-mount Brackets

• (2) AW-POE18i Power Over Ethernet Injectors

with Integrated 18 VDC Power Supplies

Table of Contents

Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Physical Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Digital Conguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting To The Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Changing the Conguration - Step By Step . . . . . . . . . . . . . . . . . . . 7

Viewing Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Advanced Diagnostic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Frequency Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Warranty and FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

If you have any questions when conguring your AvaLAN system, the best place to

get answers is to visit www.avalanwireless.com. You will also nd the latest updates

there. If more assistance is needed, send email to [email protected].

To speak to a live technician, please call technical support at the number below

during normal business hours.

PAGE 3

Technical Support (650) 384-0000 www.avalanwireless.com

User’s Manual AW58100HTP-PAIR

Quick Start Guide

The AW58100HTP-PAIR should be ready to function right out of the box. We recom-

mend connecting and powering up the units on the bench before deploying in the

eld, because it is much easier to troubleshoot problems and to adjust the congu-

ration if necessary without having to climb poles to do it.

Step 1. Gather the parts: In addition to the AvaLAN radios and the accompanying

AW-POE Power Over Ethernet Injectors and 12VDC power supplies, you will need

at least 4 CAT5 cables and a PC with a LAN connection. If desired, you may also

want a data source such as a surveillance camera with a TCP/IP interface. (You can

determine that the radios are communicating without an external data source by

browsing to the radio on the other side of the RF link from your PC.)

Step 2. Make the connections: Connect the devices as shown in the diagram. Do not

point the two radio antennas directly at each other because their close proximity

will overload the radio receivers. Place the radios at least 10 feet apart with their

antennas pointing in different directions. Plug in the AW-POE18i cords to turn on

the radios.

Step 3. The default IP addresses of the radios are written on their product la-

bels. The address of the Access Point (master) is 192.168.88.12. The address of the

Subscriber Unit (client) is 192.168.88.10. You must congure your PC’s wired LAN

port to the same subnet and an IP address different from either of the above. With

this conguration in place, you should be able to use a web browser on your PC to

Step 4. Browse to the Access Point’s interface: Enter http://192.168.88.12 into your

web browser’s address bar. If you are successful, you will see a login screen like

that on the next page. If not, the browser will time out and you will need to double

check the IP addresses and subnet masks.

Access Point

Subscriber Unit

AW58100HTP-PAIR User’s Manual

PAGE 4

Technical Support (650) 384-0000 www.avalanwireless.com

click

Step 5. Log In to the Access Point: The default login name is “admin” and the

password is “password.” If your login is successful, you should see a status window

similar to this:

CAUTION: Do not click the small “D” button - it deletes the wireless bridge inter-

face and you will need to call tech support to restore it. Click the “Associations”

tab near the top of the window to bring up this screen:

If the two radios are communicating, you will see a line as shown with the MAC

address of the Subscriber Unit. The Signal Strength box will indicate whether the

receivers are being overloaded. Re-position antennas if necessary to bring the sig-

nal strength below -30 dBm.

Utilizing state of the art MIMO technology, the AW58100HTP-PAIR achieves very high

data rate through a combination of dual spacial streams and higher level OFDM modu-

lation. The default RF conguration provides a 20 MHz channel bandwidth with 5

selectable non-overlapping channels to choose from. When congured and mounted

with antennas aimed at each other, the two radios operate as a wireless virtual LAN

cable over longer distances than can be achieved with similar products by virtue of

the greater RF power allowed for with point-to-point connections.

PAGE 5

Technical Support (650) 384-0000 www.avalanwireless.com

User’s Manual AW58100HTP-PAIR

Physical Setup

1. If the factory default digital conguration is satisfactory, you can proceed di-

rectly to physical deployment. If you wish to make any changes, you may want to

perform the procedures in the next section before mounting the radios in their nal

locations. Particularly if data security is important, you will likely want to change

passwords and encryption keys. If RF interference sources are present, you may

want to change the channel frequency or bandwidth.

2. Mount each unit securely using the mounting brackets provided or other means

as necessary. Maximize lightning resistance by providing a strong DC ground connec-

tion to the metal housing.

3. The units have two antennas in each at panel, one is horizontally polarized

and the other is vertically polarized. It is important that the antennas be pointed

toward one another and be oriented the same so that the polarization matches.

Because the 3 dB beamwidth of the at panel antennas is just 8°, careful aiming is

very important − especially over long distances.

4. Power is provided to the units by means of their Ethernet cables, allowing the

power supplies to be located at convenient locations. The included power-over-

Ethernet injectors (POE) provide the means for adding DC power to unused wires in

the cable. The POE RJ-45 socket nearest the power cord may be plugged into your

network router or, at the remote site, your remote data source such as a camera.

The RJ-45 socket on the other end of the POE should be connected via your LAN

cable to the AvaLAN radio. Then the power cords on the POEs may be plugged into a

120 VAC source. Each radio is provided with a cable clamping device that allows an

RJ45 plug on the cable to pass through and can be tightened down around the cable

to provide a weatherproof seal.

Digital Conguration

These ve conguration elements must be set for each radio:

1. IP address and subnet mask

2. User password

3. SSID (Service Set Identier)

4. Encryption pass phrase

5. Frequency Channel

The following pages will give you step by step instructions for changing these congu-

ration elements.

AW58100HTP-PAIR User’s Manual

PAGE 6

Technical Support (650) 384-0000 www.avalanwireless.com

1. Digital conguration is done by means of the radio’s built in browser interface.

The unit should be powered on and connected at least temporarily to a network

containing a computer that can run a conventional web browser.

2. Using your web browser, connect to the radio as described in the Quick Start

Guide found earlier in this manual.

3. The initial screen after a successful login is “Wireless Status”:

4. Each screen provides a menu on the left to navigate from

section to section. The menu looks like this when sections

are expanded:

In addition, many screens “drill down” when an area within

the screen is clicked.

In the upper right of the screen is a label that tells you the version of the web in-

terface. If the version number is not the same as shown below, you might want to

visit www.avalanwireless.com to see if a newer version of this manual exists before

proceeding further.

You are cautioned not to use the “back” button on your browser to attempt to

move back to earlier screens. If you do, you will be logged out and will need to

Connecting to the radio

PAGE 7

Technical Support (650) 384-0000 www.avalanwireless.com

User’s Manual AW58100HTP-PAIR

Changing The Configuration - Step by Step

Again please remember that if you change the IP Address or User Password and

forget their new values, you have locked yourself out of the browser interface.

Recovery can be a time-consuming process and will require the help of AvaLAN

Technical Support. If you are changing parameters over the RF link (we do not rec-

ommend this), be sure to make the remote changes rst because the link will be

broken if the SSIDs or Security Pass Phrases do not agree.

1. Setting the IP Address and subnet mask:

• On the Main Menu at the left side of the browser window, click “IP

Addressing”, then click “Set IP/subnet.”

• The current IP Address is shown. Click it to bring up the page that allows you

to change it.

• Enter a new IP Address and subnet, following the instructions on the page for

the subnet notation to be used. Make sure you will be able to browse to the

new address with your computer. Also, make sure that the new IP address is

unique on your LAN subnet.

• Click “Apply.” Nothing appears to happen, but you have been disconnected

and will need to browse to the new IP Address to login again.

2. Setting the User Password:

• On the Main Menu at the left side of the browser window, click “System”,

then click “Password.”

• Enter the old password and the new password twice in the boxes indicated.

• Click the “Change” button.

• Log out and log back in to test.

AW58100HTP-PAIR User’s Manual

PAGE 8

Technical Support (650) 384-0000 www.avalanwireless.com

3. Setting the SSID:

• On the Main Menu at the left side of the browser window, click “Wireless.”

Then click anywhere in the “Wireless_Radio” row to bring up the “Interface

<Wireless_Radio>” page.

• The third line down in the content table shows the current SSID and provides

a text box to change it. Change the SSID to a new value of your choice and

click “OK” or “Apply.”

• You will need to browse to the radio’s IP Address and login again after the

change.

4. Setting the Encryption Pass Phrase:

• On the Main Menu at the left side of the browser window, click “Wireless.”

Then click the “Security Proles” tab to bring show the two pre-dened pro-

les available.

• Click in the “WPA2-AES-PSK2” row to bring up a page that shows the Pre-

Shared Key and provides a text box to change it. Enter the new Pre-Shared

Key you have chosen and click “OK” or “Apply.”

PAGE 9

Technical Support (650) 384-0000 www.avalanwireless.com

User’s Manual AW58100HTP-PAIR

• If you would rather eliminate encryption and use the “default” prole, you

can change the choice of prole on the “Interface <Wireless_Radio>” page

described earlier under setting the SSID. The Security Prole dropdown list

may be found right under the SSID box on that page.

5. Setting the Frequency Channel and Bandwidth:

• On the Main Menu at the left side of the browser window, click “Wireless.”

Then click anywhere in the “Wireless_Radio” row to bring up the “Interface

<Wireless_Radio>” page (same screen as in Step 3 on the previous page).

• The default bandwidth is 20 MHz, which provides the highest possible data

rate. More range can be achieved at the expense of data rate by choosing a

narrower bandwidth. Your choices are 5, 10 or 20 MHz. The default Frequency

Channel is 5805 MHz. There are more choices available in the dropdown list

than are legal or appropriate for this set of products. Please choose from

among the frequencies shown in the table on the last page of this manual.

Make sure that you choose channels for Access Point units operating in prox-

imity that do not overlap.

• Change to the Frequency desired and click “OK” or “Apply.”

• Note that the important Frequency Channel setting is made on the Access

Point. You may also set the Frequency Channel on Subscriber Units, but if they

don’t nd an AP on that channel, they will search and automatically switch to

the Frequency Channel of the AP with a matching SSID.

AW58100HTP-PAIR User’s Manual

PAGE 10

Technical Support (650) 384-0000 www.avalanwireless.com

After conguring your AvaLAN radios and establishing links among them, you can

use the browser interface to view status and troubleshooting Information. Choose

“Wireless” from the Main Menu at the left side of the window. The “Wireless” page

leads to all of the useful status information.This page has three tabs, Interfaces,

Associations and Security Proles.

1. Interfaces Tab: This provides a list of the interface processes running in this ra-

dio. If it is a SU, there will be only one, “Wireless_Radio.” If it is an AP, there will

also be a WDS process running for each SU that is connected.

Status information that is visible on this page includes the current transmit and

receive bits per second, the number of packets sent and received since last reboot

and the packet drops and errors encountered. For the “Wireless_Radio” process,

the table includes the radio’s RF frequency and SSID. (CAUTION! Do not click the

little “D” button.) Clicking on this line brings up more information:

This page displays the current RF frequency, the SSID, the Security Prole in use, cur-

rent transmission rates, amount of data sent and received since last reboot, drops

and errors. Also shown are graphs of megabits per second and packets per second

during the last three minutes or so. The graphs are well labeled and auto-scale to t

Viewing Status Information

Inhaltsverzeichnis

Andere AvaLAN Netzwerk-Router Handbücher

AvaLAN

AvaLAN AW900x Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung