PAGE 3
Technical support (650) 384-0000 www.avalanwireless.com
AW900XTR
User’s Manual
Operational summary
The AW900XTR Radio allows the user to create a long-range, wireless Ethernet net-
workwithupto16subscriberunitsperaccesspoint.Thecongurationmayinclude
any combination of AW900XTR and AW900XTP radios. (Please note that older AvaLAN
900 MHz radios can exist on the same LAN but cannot be used to form wireless links
with the AW900XTR/XTP units because link encryption protocols have changed.)
Conguring a wireless link with theAW900XTR requires the establishment of six
elements:
• Each radio must know whether it is to be an access point (AP) or subscriber
unit (SU).
• Each radio must have an IP address that is unique among all others on the
same network.
• The AP must know how many SUs are expecting communication with it.
• The AP and any given SU must agree on which radio frequency channel they
are using. This can be manually set or allowed to change automatically.
• The SU must be assigned a unique subscriber ID to specify which time division
slot it will use when communicating with the AP.
• The AP and any given SU must share a common 128-bit encryption key.
AW900XTRradiosmaybeconguredbytwodifferentmethods.Theymaybecon-
nected to a computer that will run a web browser, setting parameters via their
built-in browser interfaces. They may also be programmed via the older “easy key”
method using the DIP switches and LEDs on the module inside the case. If you wish
to use the older method, go to our website and download the user manual for the
AW900IT or AW900XT and follow the procedures there.
The access point (AP) automatically scans for the best of the 12 available radio fre-
quency channels, encrypts Ethernet data received from the network, and transmits
it wirelessly to the correct subscriber unit (SU). The AP is constantly monitoring the
radio link and can automatically change the channel if performance is degraded due
to interference. If two AP units are very close to one another, they may interfere
if operating on adjacent frequency channels. Place them at least 10 feet apart or
manually select non-adjacent channels for their operation. Also, the SU should be
placed at least 10 feet from the AP to avoid overloading the radio’s receiver.
Any 10/100 BaseT Ethernet client device (ECD) can be connected to an AW900XTR
subscriberunit.EachSUencryptsEthernettrafcreceivedfromtheattachedECD
and transmits the data wirelessly to its AP. Each SU can be plugged directly into an
ECD without adding drivers or loading software. Essentially, once the AP/SU pair is
conguredandrunningitbehaveslikeacontinuousEthernetcable.
