Avantree BTHS-AS90P Bedienungsanleitung

BTHS-AS90P

User Manual

Product overview

Product specication

Basic operation

LED indicator

Activate noise cancellation (ANC)

Connect to a Bluetooth device

Connect to two Bluetooth devices simultaneously

Reconnect to Bluetooth device

Qualcomm® aptX™ HD

Qualcomm® aptX™ Low Latency

One-touch connection (NFC)

Using as a wired headphone

Charging

Clear the headphones pairing history

Troubleshooting

················································································

··········································································

······································································································

··············································································································

·······················································································································

···················································································································

·····················································································

·····································

···············································································

································································································································

·································································

···································································································

··············································································

················································································································

High-end Wireless ANC Headphones

Product Overview

• Bluetooth Version: V5.0

• Support proles: HFP, HSP, A2DP, AVRCP

• Supported audio format(s): SBC, aptX, aptX-LL, aptX-HD

• Driver diameter: 40mm

• Impedance: 32ohm

• Frequency Response: 20Hz-20KHz

• Eﬀective range: Line of sight approx. 30 ft (10 m)

•Working time: Up to 24 hours music time

• Charging time: approx. 2 hours

• Ear pads inner diameter: 6cm (length)* 3.7cm(width)

• Ear pads outer diameter: 9.5cm (length)* 7.5cm(width)

• Product weight: 230g

Please read this User Guide carefully and keep it handy

For more AS90P product information please see support.avantree.com or

search “AS90P” or “Avantree Aria Pro” on www.avantree.com

Product specication

ANC

/ / /

Power on

Power oﬀ

Activate / deactivate smart voice assistant

Voice prompts oﬀ

Voice prompts on

Slide the power switch towards middle

Slide the power switch towards

Press once (wireless connected, non-calling status)

Press and hold both and for 1s to deactivate voice prompts

Press and hold both and for 1s to activate voice prompts

Basic operation

LED indicator

Working Status LED indicator

General function

Play / Pause music

Volume up / down

Next / Previous track

Press once

Press / once

Hold / for 2s

Music Control >

Answer / End a call

Reject a call

Last number redial

Mic mute on / oﬀ

Press once

Hold for 2s with a call coming-in

Press twice

On the headset - Press once during an active call

On boom mic –Mute on / Mute oﬀ

ANC ON

ANC OFF

Pairing Mode

Connected

Reconnecting

Disconnected

Low battery

Play audio in SBC Codec

Play audio in AptX Codec

Play audio in AptX-LL Codec

Play audio in AptX-HD Codec

ANC indicator* shows GREEN

ANC indicator* turns OFF

Blinks BLUE & RED alternately

Blinks BLUE once every 5s

Blinks BLUE once every 1s

Blinks BLUE once every 2s

Blinks RED once every 10s

Blinks BLUE once every 5s

Blinks WHITE once every 5s

Blinks WHITE twice every 5s

Blinks WHITE 3 times every 5s

Call Control >

Note:

You will NOT be able to use the ANC function when the headphones’ battery is low.

If you want to use the ANC function in wired mode, please power ON the headphones rst.

After power ON, slide ANC switch to “ANC” to activate the ANC function. The ANC LED light will turn GREEN.

Slide ANC switch opposite to “ANC” to deactivate ANC function, the ANC LED will turn oﬀ.

Activate noise cancellation (ANC)

Connect to a Bluetooth device

Enter headphones into PAIRNG MODE - Slide the power switch to position and hold for 3s until the

LED ashes BLUE and RED alternately.

On your mobile device – Turn on Bluetooth and select “Avantree AS90P” to connect. If you are using a

Bluetooth transmitter, please enter your transmitter into PAIRING MODE (please refer to your transmitter’s user

manual).

ANC

Note: This feature only works for two mobile devices, such as cellphones and/or tablets. It doesn’t work for PCs

or Bluetooth transmitters.

Connect to two Bluetooth devices simultaneously

aptX-HD audio ensures that your Bluetooth® wireless enabled device can deliver High Denition (HD) audio. To

take advantage of this feature, please ensure that the audio source device or the transmitter also supports the

aptX-HD Latency codec. To check if your device is aptX-HD certied, visit aptX’s website: www.aptx.com.

We recommend Avantree Oasis Plus to ensure compatibility with the AS90P.

Qualcomm® aptX™ HD

Connect AS90P to the FIRST device as shown above.

Enter the AS90P into PAIRING MODE again and repeat the above steps to connect to the SECOND device.

Normally, once powered on, the headphones will reconnect to the last connected device automatically within

5-10 seconds.

If it doesn’t, please slide the Power Switch to position ONCE, OR select “Avantree AS90P” from your

device to connect manually. (If you’re using a Bluetooth transmitter, please refer its user manual to reconnect)

Reconnect to Bluetooth device

aptX-Low Latency delivers high quality 16bit audio while minimizing audio/video syncing issues. To take advantage

of this feature, please ensure that the audio source device or the transmitter also supports the aptX-Low Latency

codec. To check if your device is aptX-LL certied,visit aptX’s website: www.aptx.com.

We recommend any of the following Avantree Bluetooth transmitters - Oasis Plus, Audikast, Leaf to ensure

compatibility with the AS90P.

Qualcomm® aptX™ Low Latency

You may use the supplied 3.5mm audio cable to connect to a non-Bluetooth device.

Note: The control buttons, the built-in mic, and the detachable boom mic DOES NOT work in wired mode.

Note: If you wish to use the ANC function in wired mode, please turn on the headphones rst.

Using as a wired headphone

One-touch connection (NFC)

Turn on the NFC function on your Android smartphone (Android 4.1 or later) and ensure that the screen is active

and unlocked.

Power on the headset, keep touching the smart phone with the headphones “N” Mark until the smart phone

reacts.

Follow the on-screen instructions to complete the pairing and connection. When the headset has been connected

to the smart phone, you’ll hear voice prompt “connected.”

NFC

When the LED starts blinking RED once every 10s, or when you hear “beep” / prompts sound, you should recharge

your headphones. Please plug it into a USB wall charger (DC 5V / 0.5-2A) or a powered USB port via the micro USB

cable that we provided.

Normally it takes 2 hours to fully recharge. The LED indicator on the headphones will remain RED while charging

and automatically turn o when the charging is complete.

Charging

Turn on the headset (Non-calling Status.) Press and hold both and for 5 seconds until the LED blinks PINK

for 2 seconds. Now the pairing history has been cleared. The headphones will enter PAIRING MODE automatically

(LED blinks Blue and Red alternately) and you’ll be able to pair it with the target Bluetooth device again.

Clear the headphones pairing history

Troubleshooting

No sound with PC?

Set Avantree AS90P as the default device or output device on the PC.

When using AS90P to make VOIP calls through apps, please set AS90P Hands-Free as Microphone and Speakers

device.

No sound with Bluetooth transmitter when watching TV?

Ensure Bluetooth transmitter and headphones are connected properly.

Check to ensure audio source is functioning properly

- AUX & RCA output on TV – test with wired headphones

- OPT output on TV – Set audio format to “PCM/LPCM” or turnoﬀ Dolby/DTS

Change your TV audio out setting to “External speakers /Headset.”

Headphones do not pair with Bluetooth device?

Ensure that the AS90P is in Pairing mode – LED ashing BLUE and RED alternately.

For Bluetooth transmitters, please ensure that the transmitter is in Pairing mode – you may refer to its user manual.

For Smart phones, tablets and PC

Turn the Bluetooth oﬀ and then on again.

Delete “Avantree AS90P” headphones from your device’s Bluetooth list and try to pair again.

Clear the headphone’s pairing history and pair again.

Inhaltsverzeichnis

Andere Avantree Kopfhörer Handbücher

Avantree

Avantree TWS120 Bedienungsanleitung

Avantree

Avantree Ace 130 Bedienungsanleitung

Avantree

Avantree BTHS-TWS115 Bedienungsanleitung

Avantree

Avantree Repose Bedienungsanleitung

Avantree

Avantree BTHS-NB17 Bedienungsanleitung

Avantree

Avantree BTHS-136 Bedienungsanleitung

Avantree

Avantree BTHS-AS9 Bedienungsanleitung

Avantree

Avantree AS90C Betriebsanleitung

Avantree

Avantree BTHT-4186 Bedienungsanleitung

Avantree

Avantree HT381 Bedienungsanleitung

Avantree

Avantree Audition Procast Bedienungsanleitung

Avantree

Avantree BTHS-134 Bedienungsanleitung

Avantree

Avantree BTHS-TWS115 Bedienungsanleitung

Avantree

Avantree BTHS-ANC031 Gebrauchsanweisung

Avantree

Avantree Audition Bedienungsanleitung

Avantree

Avantree Hive Bedienungsanleitung

Avantree

Avantree Sacool BTHS-AS8 Bedienungsanleitung

Avantree

Avantree BTHS-TWS110 Bedienungsanleitung

Avantree

Avantree BTHS-TWS109 Bedienungsanleitung

Avantree

Avantree TWS109 Bedienungsanleitung

Avantree

Avantree BTHS-ANC032 Bedienungsanleitung

Avantree

Avantree BTHS-AS9S Bedienungsanleitung

Avantree

Avantree BTHS-TWS106 Bedienungsanleitung

Avantree

Avantree DG59 Gebrauchsanweisung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung