Avantree WSHT-380 Bedienungsanleitung

User Manual

Wireless Headphone

System

WSHT-380

Overview··················································································································································································· 1

LED indication & voice prompts········································································································································ 2

Setting up the HT380···························································································································································· 2

Connecting the Transmitter to your TV/audio source·······························································································3

Check your TV/Audio Source output options··········································································································3

TVs with DIGITAL OPTICAL/SPDIF Audio Out ··········································································································4

TVs with AUX 3.5mm Audio Out ··································································································································5

TVs with RCA audio out (Red/White ports labeled “AUDIO OUT”)···································································· 5

Receiver with 6.35mm Phone Jack at Front ·············································································································6

If you cannot reach/do not have output ports on your TV·················································································· 7

Ambient function···································································································································································7

Left-Right audio balance control ······································································································································ 8

Mode selection ·······································································································································································8

Charging ···················································································································································································8

Overview

Transmitter / Charging Dock

Neck-loop Receiver

LED Indication & Voice Prompts

LED Indication

Setting Up the HT380

Powering up the transmitter/charging dock

Connect it to a compatible power source using the AC/DC adapter. Indicator lights up GREEN.

Note: If no audio signal detected within 5 minutes after power on, indicator will turn o.

LED Indicator Status

Transmitter/Charging

Dock

Lights up

Green Power on

Solid Green If audio signal detected (1 minute after

power on)

Flash Green If no audio signal detected

Solid Red Charge the neck- loop receiver

Solid Green Fully charged

Solid Red Charge the spare battery

Solid Green Fully charged

LED indicator lights up accordingly when the

corresponding sound mode is selected.

Neck-loop Receiver

VOLUME +-

Solid Green Connected with the transmitter

Flash Green Disconnected with the transmitter

Solid Red Ambient mode

Turning on the neck-loop receiver

Slide ON/OFF switch to “ON” position, indicator on the neck-loop receiver ashes GREEN.

When successfully connected to the transmitter, will turn SOLID GREEN.

Plug the wired earphone

Plug the wired earphone to the port on the neck-loop receiver.

Please ensure that the wired earphone is FULLY and FIRMlY plugged in.

Connecting the Transmitter to Your TV/Audio Source

Now that you’ve completed step 1, on the neck-loop receiver should be SOLID GREEN, indicating

that the transmitter has successfully connected to the receiver and is ready for use.

After you’ve connected the HT380 to your TV/audio while following the steps shown in the sections

below, if you still can’t hear anything through the earphones, please either adjust the TV audio output

settings as suggested or contact your TV manufacturer for support.

Check Your TV/Audio Source Output Options

LED Indication & Voice Prompts

LED Indication

Setting Up the HT380

Powering up the transmitter/charging dock

Connect it to a compatible power source using the AC/DC adapter. Indicator lights up GREEN.

Note: If no audio signal detected within 5 minutes after power on, indicator will turn o.

Fig 2-1 Output options

12 15

TVs with Digital Optical/Spdif Audio Out

Fig 2-2 Set up the transmitter using optical audio out

Fig 2-3 Set TV speaker to “External Speaker” Fig 2-4 Set TV Audio Format to “PCM”

After connecting cables, adjust your TV setting as following:

1) Ensure your TV Speaker is set to “External Speaker.”

2) Ensure that your TV Digital Audio Out is set to “PCM” or “Dolby/DTS” is set to OFF(not Auto).

Note:

Unplug any devices from the AUX 3.5mm jack while using the OPTICAL audio out. (If anything is

plugged into the AUX jack, the transmitter will preferentially default to the AUX signal and ignore

any OPTICAL input.)

Fig 2-5 Set up the transmitter using AUX 3.5mm audio out

Fig 2-6 Set TV speaker to “Headset”

TVs with AUX 3.5mm Audio Out

After connecting, you should be able to hear your device through the headphones; if not:

1) Ensure your TV speaker setting is set to “Headset”.

2) Plug wired headphones into the headphone jack on TV; see if you can hear anything.

TVs with RCA Audio Out (Red/White Ports

Labeled "AUDIO OUT ")

Fig 2-7 Set up the transmitter using RCA audio out

Speakers

Internal speakers

External speakers

Headset

Fig 2-8 Use the correct RCA ports Fig 2-9 Set TV speaker to “External Speaker”

Fig 2-10 Set up the transmitter using 6.35mm phone jack

After connecting, you should be able to hear your device through the headphones; if not:

1) Ensure using TV Red/White ports labeled "AUDIO OUT”; other Red/Whiteports will NOT work.

2) Ensure your TV Speaker setting is set to “External Speaker”.

3) Plug wired headphones into RCA ports with AUX 3.5mm to RCA audio adaptor cable to see if you can

hear anything.

Receiver with 6.35mm Phone Jack at Front

Fig 2-11 Set up the transmitter using TV's built-in speaker

After connecting, you should be able to hear your device through the headphones;

If not:

Plug any wired headphone into the converter plug, adjust the volume on the AV Receiver to a suitable

level.Try it on to see if you can hear anything through the headphones. Please ensure that the volume is

set to a comfortable listening level to avoid damaging your hearing.

If You Cannot Reach/Do Not Have Output Ports On Your TV

If no “audio out” port is available on your TV or if the ports are hard to reach, you may also use the TV’s

built-in speaker. Simply using the sticker to stick the external microphone (both the sticker and external

microphone coming with the HT280) to your TV (near your TV speaker). It should pick up the audio and

transmit the audio to the earphones.

Notes:

Please note that the sound quality produced by this method may not be as good as that of optical/ana-

log connections.

Usually the TV’s built-in speaker locates at the bottom of the TV. However, it may vary depending on the

TV's brand & model. Please refer to your TV's user manual for more details.

Before sticking the external microphone to your TV, we recommend trying a few dierent spots to nd

the optimum position for the best sound quality.

Ambient Function

To have the device pick up sounds in the surrounding, press the AMBIENT button ONCE. You’ll see the

power indicator on the neck-loop receiver turn RED and hear TWO beeps from the earphone. Please

note that the audio from the audio source such as your TV will be cut o under this mode.

Install batteryCharge the spare battery

To turn o this ambient function, press the AMBIENT button ONCE. Thepower indicator will turn

GREEN, and you’ll start getting audio from the audio source such as your TV again.

Left-right Audio Balance Control

Via the audio balance controls on the back of the neck-loop receiver, you can adjust the volume of each

earbud and customize it to t your hearing levels.

Mode Selection

HT380 oers 4 dierent modes that you may choose from: Flat (default setting, no LED indicator),

Balanced, Treble, and Bass. Press the MODE button ⑥ONCE to switch between modes. The LED indica-

tor ⑦will light up accordingly.

Charging

When the battery is low, you’ll start hearing THREE “beeps” every minute from the earphones. The

neck-loop receiver will automatically turn o within about 5 minutes.

Now, you can:

Option 1 –Swap in the spare battery

Any questions? Please visit:

support.avantree.com

(User Manuals, FAQ, Video Tutorials and more)

Email support: support@avantree.com (Response Time: 1 working day)

Live chat: www.avantree.com

To turn o this ambient function, press the AMBIENT button ONCE. Thepower indicator will turn

GREEN, and you’ll start getting audio from the audio source such as your TV again.

Left-right Audio Balance Control

Via the audio balance controls on the back of the neck-loop receiver, you can adjust the volume of each

earbud and customize it to t your hearing levels.

Mode Selection

HT380 oers 4 dierent modes that you may choose from: Flat (default setting, no LED indicator),

Balanced, Treble, and Bass. Press the MODE button ⑥ONCE to switch between modes. The LED indica-

tor ⑦will light up accordingly.

Charging

When the battery is low, you’ll start hearing THREE “beeps” every minute from the earphones. The

neck-loop receiver will automatically turn o within about 5 minutes.

Now, you can:

Option 1 –Swap in the spare battery

Option 2 - Charge the neck-loop receiver

Turn o the neck-loop receiver and place it into the charging cradle on the transmitter, LED indicator ④

lights up RED while charging.

When the charging is complete, ④turns GREEN.

Inhaltsverzeichnis

Andere Avantree Kopfhörer Handbücher

Avantree

Avantree Audition Procast Bedienungsanleitung

Avantree

Avantree BTHS-NB17 Bedienungsanleitung

Avantree

Avantree BTHS-AS9 Bedienungsanleitung

Avantree

Avantree TWS116 Bedienungsanleitung

Avantree

Avantree BTHS-ANC031 Gebrauchsanweisung

Avantree

Avantree ADHF-039 Bedienungsanleitung

Avantree

Avantree HT381 Bedienungsanleitung

Avantree

Avantree Sacool BTHS-AS8 Bedienungsanleitung

Avantree

Avantree HT41899 Bedienungsanleitung

Avantree

Avantree BTHS-TWS109 Bedienungsanleitung

Avantree

Avantree TWS109 Bedienungsanleitung

Avantree

Avantree AS90C Betriebsanleitung

Avantree

Avantree BTHS-134 Bedienungsanleitung

Avantree

Avantree Sky Ace BTHT-2130 Bedienungsanleitung

Avantree

Avantree ADHF-039 Bedienungsanleitung

Avantree

Avantree BTHS-TWS115 Bedienungsanleitung

Avantree

Avantree BTHS-NB18 Bedienungsanleitung

Avantree

Avantree Sacool Pro Bedienungsanleitung

Avantree

Avantree AH5 Bedienungsanleitung

Avantree

Avantree DG59 Gebrauchsanweisung

Avantree

Avantree Hive Bedienungsanleitung

Avantree

Avantree BTHS-AS9S Bedienungsanleitung

Avantree

Avantree BTHS-136 Bedienungsanleitung

Avantree

Avantree Audition Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung