Avaya IP OFFICE EU24 Bedienungsanleitung

EU24 Expansion Module

User’s Guide

555-250-702

Issue 1

May 2002

NOTICE

While reasonable efforts were made to ensure that the information in this document was complete and accurate at

the time of printing, Avaya Inc. can assume no responsibility for any errors. Changes or corrections to the

information contained in this document may be incorporated into future issues.

YOUR RESPONSIBILITY FOR YOUR SYSTEM’S SECURITY

Avaya Inc. does not warrant that this product is immune from or will prevent unauthorized use of common-carrier

telecommunication services or facilities accessed through or connected to it. Avaya Inc. will not be responsible for

any charges that result from such unauthorized use. Product administration to prevent unauthorized use is your

responsibility and your system manager should read all documents provided with this product to fully understand

the features available that may reduce your risk of incurring charges.

OBTAINING PRODUCTS

To learn more about Avaya Inc. products and to order any of these products, access the Avaya web site at

www.avaya.com.

THE “CE” MARK

If the “CE” mark is affixed to this equipment, it means that it conforms to the European Union Electromagnetic

Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC).

Overview

The EU24 Expansion Module is an optional device that can be connected to an Avaya 2420 Digital Telephone to

extend the number of call appearance and feature buttons available on the telephone.

The expansion module has 24 buttons arranged in two columns. Depending on how they have been programmed

for your call processing system, these buttons can be used for call appearances or features. You can adjust the

viewing angle of the EU24 display to match that of your 2420 telephone.

Figure 1 shows a top view of the EU24. (The left column is displayed.)

FIGURE 1 The EU24 Expansion Module

Requirements

Before you can begin using the EU24 Expansion Module, the module must be connected to the 2420 telephone

according to the instructions in the EU24 Expansion Module Installation and Safety Instructions (555-233-136).

EU24

Y 72254 :

Z 72254 :

HARRY :

JACKI :

JENN :

ANNIE :

PATTY :

TIMER :

Cfrwd :

LWC :

CnLWC :

TONI :

Call appearance/feature buttons

Display

Alternate Display button

Feature Active icon for feature in left column

Feature Active icon for feature in right column

Using the EU24 Expansion Module

The following sections explain how to use the features of the EU24 Expansion Module. For more information,

consult your system manager.

Viewing the Alternate Display

Although the EU24 Expansion Module supports an additional 24 call appearance/feature buttons, it only displays

the button labels and icons for one column at a time. A dotted line separates the left column from the right column.

When you are viewing the labels and icons for the left column, the icons for the right column are displayed to the

right of the dotted line. To view the column not currently displayed, press the Alternate Display button.

Selecting a Call Appearance/Feature Button

To select an available call appearance or feature, press the button next to the label in the column currently

displayed.

If the call appearance or feature is not currently displayed, use the Alternate Display key to access the additional

12 call appearance/feature button labels.

Understanding Call Appearance/Feature Button Status Icons

When a call arrives for a call appearance on the EU24 Expansion Module, the bell icon blinks on the corresponding

call appearance. To answer the call, press the button associated with the call appearance.

The icons displayed on the call appearance allow you to determine the status (for example, on hold) of each call on

the EU24 Expansion Module. Icons also indicate whether a feature has been administered for a particular button

on the EU24 Expansion Module. The following table contains an explanation of these icons.

Status Icons

Icon Definition

Ringing An incoming call is waiting to be answered.

Active The call you are currently handling.

On hold A call currently on hold.

On soft hold A call put on hold during a transfer or

conference.

Feature

active

Button on left side of the display currently is

enabled.

Feature

active

Button on right side of the display currently

is enabled.

Feature

pending

Your request is being processed but is not

immediately available.

Andere Handbücher für IP OFFICE EU24

Inhaltsverzeichnis

Andere Avaya Steuereinheit Handbücher

Avaya

Avaya J100 Series Bedienungsanleitung

Avaya

Avaya 100A Leitfaden

Avaya

Avaya LUPCMZONE Bedienungsanleitung

Avaya

Avaya ArgentDCP Kurzanleitung

Avaya

Avaya J100 Series Handbuch

Avaya

Avaya UC Bedienungsanleitung

Avaya

Avaya INDeX 30 Wartungs- und Serviceanleitung

Avaya

Avaya UC110 Benutzerhandbuch

Avaya

Avaya IP Office Phone Manager Bedienungsanleitung

Avaya

Avaya ArgentPhone Kurzanleitung

Avaya

Avaya Visio-IP500 Bedienungsanleitung

Avaya

Avaya X330W-2DS1 Bedienungsanleitung

Avaya

Avaya AA1419043-E6 Bedienungsanleitung

Avaya

Avaya IP OFFICE EU24 Handbuch

Avaya

Avaya Cajun P580 Bedienungsanleitung

Avaya

Avaya X330G2 Bedienungsanleitung

Avaya

Avaya JBM24 Datenblatt

Avaya

Avaya one-X Deskphone SBM24 Referenzhandbuch

Avaya

Avaya 1200 Series Bedienungsanleitung

Avaya

Avaya Partner 308EC Bedienungsanleitung

Avaya

Avaya EU24BL Handbuch

Avaya

Avaya 3 Bedienungsanleitung

Avaya

Avaya M460ML-SPV Bedienungsanleitung

Avaya

Avaya M4648ML-T Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung