Avenview KPD-TCP1US-8 Bedienungsanleitung
8-Button Wall Plate Control Keypad
PRODUCT MANUAL
Model: KPD-TCP1US-8
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
© 2017 Avenview Inc. All rights reserved.
The contents of this document are provided in
connection with Avenview Inc. (“Avenview”) products.
Avenview makes no representations or warranties with
respect to the accuracy or completeness of the
contents of this publication and reserves the right to
make changes to specications and product
descriptions at any time without notice. No license,
whether express, implied, or otherwise, to any
intellectual property rights is granted by this
publication. Except as set forth in Avenview Standard
Terms and Conditions of Sale, Avenview assumes no
liability whatsoever, and disclaims any express or
implied warranty, relating to its products of Avenview
Inc. is strictly prohibited.
Revision Date Description
00 12/6/2017 Initial Release
REVISION HISTORY
Rev.00 12/2017
www.avenview.com
TABLE OF CONTENTS
1. GETTING STARTED....................................................................................................................................................1
1.1 IMPORTANT SAFEGUARDS.......................................................................................................................................1
1.2 SAFETY INSTRUCTIONS............................................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)..................................................2
2. INTRUDUCTION........................................................................................................................................................3
2.1 PACKAGE CONTENTS...............................................................................................................................................4
2.2 BEFORE INSTALLATION.............................................................................................................................................4
2.3 APPLICATION DIAGRAM............................................................................................................................................5
2.4 PANEL DESCRIPTION.................................................................................................................................................6
2.4.1 I/O PANEL (KPD-TCP1US-8) FRONT............................................................................................................6
2.4.2 I/O PANEL (KPD-TCP1US-8) BACK..............................................................................................................6
3. INSTALLATION............................................................................................................................................................7
3.1 TELNET CONFIGURATION.......................................................................................................................................7
3.1.2 ENABLING TELNET CLIENT........................................................................................................................8
3.2 LOGIN TO KPD-TCP1US-8 VIA TELNET....................................................................................................................9
3.3 TELNET COMMANDS...............................................................................................................................................10
3.4 PC SOFTWARE...........................................................................................................................................................11
4. WEBGUI......................................................................................................................................................................12
4.1 CONFIGURATION SETTINGS..................................................................................................................................12
4.2 MACRO SETTINGS....................................................................................................................................................13
4.2.1 MACRO EDIT MENU...................................................................................................................................13
4.2.2 COMMAND SELECT MENU.......................................................................................................................14
4.3 EXTENSION MACRO................................................................................................................................................15
4.4 COMMAND SETTINGS.............................................................................................................................................15
4.5 DEVICE SETTINGS.....................................................................................................................................................16
4.6 KEY SETTINGS...........................................................................................................................................................16
4.7 SCHEDULE.................................................................................................................................................................17
4.7.1 MACRO SELECT MENU..............................................................................................................................17
4.8 NETOWRK SETTINGS...............................................................................................................................................18
4.9 SYSTEM SETTINGS....................................................................................................................................................18
4.10 TIME SETTINGS.........................................................................................................................................................18
5. SPECIFICATIONS.......................................................................................................................................................19
WARRANTY................................................................................................................................................................20
Rev.00 12/2017
www.avenview.com
1.2 SAFETY GUIDELINES
The KPD-TCP1US-8, 8-Button Wall Plate Control Keypad has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipments, the HBT2-C6BPOC-SET
should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the
risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards.
Keep the device away from liquids.
Spillage onto the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
If the unit appears damagaed, have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
!
!
!
!
!
!
!
!
1.1 IMPORTANT SAFEGUARDS
• Any product on which the serial number has been defaced, modified or removed.
• Damage, deterioration or malfunction resulting from:
• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
• Repair or attempted repair by anyone not authorized by us.
• Any damage of the product due to shipment.
• Removal or installation of the product.
• Causes external to the product, such as electric power fluctuation or failure.
• Use of supplies or parts not meeting our specifications.
• Normal wear and tear.
• Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Avenview warranty certificate please refer to page #20
Warranty does not include:
SECTION 1 : GETTING STARTED
Rev.00 12/2017
www.avenview.com 1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
Warning Symbols Description
ONLY USE THE PROVIDED POWER CABlE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE ELECTRICAL
PARTS. THIS MAY RESULT IN ELECTRICAL SHOCK OR BURN.
THIS WARNING SYMBOL MEANS DANGER. WHEN THIS SYMBOL IS
PLACED, YOU ARE IN AN ENVIROMENT THAT CAN CAUSE
BODILY INJURY.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE
WARRANTY AND CONTINUED USE OF THE PRODUCT.
THE CIRCUIT BOARDS ARE VERY SENSITIVE TO STATIC
DISCHARGE. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED
ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Avenview is
not responsible for any radio or television interference caused by using other than recommended cables and connectors or
by unauthorized changes or modifications to this equipment.
Rev.00 12/2017
www.avenview.com 2
Features
- 8 macro buttons and extra 8 macro buttons in WebGUI with up to 128 commands to implant for control system
- Supports Relays to control on/off of other devices
- Supports Scheduling control system and settings
- Supports scheduling memory over power blackout up to 48hrs
- Supports Key Pad, Telnet and WebGUI controls
- Supports PoE function or DC power supply selection
- US 1 Gang wall plate design with adjustable LED dim light
- Multiple uses for home, hotel room central control, conference room, etc.
2. INTRODUCTION
The Avenview KPD-TCP1US-8, 8-Button Wall Plate Control Keypad is a versatile and useful control method for both
system integrators and smart home users alike. This keypad can send commands to any Ethernet or relay trigger
controlled device in your system. With up to 8 physical macro buttons and up to an additional 8 software macro buttons
you can pre-program and recall up to 16 distinct macros providing for complete control over your audio and video
environment.
The soft and colorful LED buttons are suitable for all environments and PoE (Power over Ethernet) support allows for
creative placement of the keypad within your space without needing to be concerned about keeping it near a live power
source. Additionally, the integrated clock and calendar based scheduling feature allows you to trigger macros to control
devices within your installation at a specific time, or on a recurring schedule.
Rev.00 12/2017
www.avenview.com 3
2.2 BEFORE INSTALLATION
ATTENTION
• To prevent airflow restriction, allow clearance around the ventilation openings to be at least: ONE Inch (25.4 mm).
• Unauthorized changes or modifications could void the user's authority to operate the equipment.
• Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents.
• Place the product on an even and stable surface. If the product falls, it may cause an injury to a person or malfunction.
• Do not place the product in high temperatures (over 50°C), or low temperature (under 0°C) or high humidity.
• Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
• Do not twist or pull by force ends of the UTP /HDMI cable. It can cause malfunction.
• Keep the device away from water. If the unit becomes wet, power off immediately.
• Installation of the equipment must comply with local and national electrical codes.
• Take care when connecting units to the electrical power circuit, incase the maximum rated circuit is not overloaded
QTY
x1
x1
x2
x1
x1
x1
ITEM
KPD-TCP1US-8
8-Button Wall Plate
USB Type A to Mini USB
OTG Connector
3.5mm Pitch Terminal Block
5 V/2.6A Power Adaptor
Button Stickers (28pc)
User Guide
#
1
2
3
4
5
6
Before you start the installation of the KPD-TCP1US-8, please ensure that the packaging has the listed items below.
2.1 PACKAGE CONTENTS
Rev.00 12/2017
www.avenview.com 4
2.3 APPLICATION DIAGRAM
Rev.00 12/2017
www.avenview.com 5
1. Relay Out: Connect to device that supports
DC 0~24V/5A power or signal that supports relay
function.
2. RJ45 Control: Connect from PC/Laptop
through Telnet or WebGUI control with RJ-45
terminated cable. This unit supports 48V PoE.
3. DC 5V: Plug in the 5V DC power adaptor
included in the package and connect to AC wall
outlet.
32
1
2.4.2 I/O PANEL (KPD-TCP1US-8) Rear
1. 1-8 Macro Buttons: Each button has a red and blue LED dimmable from 0~100% and can
be configured with up to 16 commands. Refer to Section 4 for more details.
1
2.4.1 I/O PANEL (KPD-TCP1US-8) Front
2.4 PANEL DESCRIPTION
Rev.00 12/2017
www.avenview.com 6
3. Check Use the following IP
address, for the IP address
enter 192.168.1.x (if unsure
use 192.168.1.5) Enter subnet
mask number 255.255.255.0 Click
OK, then click OK again.
2. Select Internet Protocol
Version 4 (TCP/IP) then click
Properties
1. Click Start menu, go to Control Panel
> Network and Sharing Center >
Change Adapter Settings > Local Area
Connection. Right click and choose
Properties.
Before logging in to the keypad via TELNET command-line interface (CLI) or Web GUI, make sure
that your computer/controller and KPD-TCP1US-8 are on the same network segment. The default
network settings of the unit is 192.168.1.50, subnet mask 255.255.225.0.
Set your IP address in the 192.168.1.x range with a subnet mask of 255.255.255.0. To do this on a
Windows PC, follow the instructions below:
3.1.1 Setting a Static IP on Your Computer
3.1 TELNET CONFIGURATION
3. INSTALLATION
To setup the Avenview KPD-TCP1US-8 follow these steps for connecting the device:
1. Turn off all connected devices including network switches and relay devices
2. Connect an RJ-45 ethernet cable from the keypad to a network switch
3. Connect a PC/laptop to the network switch using an ethernet cable
2. Ensure power adaptor is securely connected to the keypad or power is being supplied over PoE
3. Using a web browser, navigate to the leypad’s WebGUI (See Section 4 for more details)
www.avenview.com 7
Inhaltsverzeichnis
