Avery Dennison Monarch 1115 Bedienungsanleitung

Monarch ®

1115®Labeler

Operating Instructions

LOADING LABELS & SETTING PRINT BANDS

LOADING LABELS

1Slide label roll between hubs.

Discard first fourteen labels

and backing paper.

2Squeeze operating lever and feed

label strip over spring and under brake

wheels until about twelve labels come out.

3Feed label strip up under plate until

two labels come out. Rewind

label roll until loop is removed.

4Pull backing paper to the end of the

operating lever, separating labels from

backing paper.

5Tear backing paper evenly

between cuts, close to the end of the

strip as shown.

6Hold labeler upside down and while

squeezing operating lever, feed

backing paper into slot. Squeeze operating

lever eight times until backing paper comes

through the rear exit.

7If backing paper does not become

taut and exit at rear: Turn labeler

upside down, squeeze operating lever and

pull backing paper out of slot. Repeat

steps, 4, 5, and 6.

SETTING PRINT BANDS

1Pull the knob until the

indicators point to

the desired band.

4Print a sample label to insure

information is correct.

2Turn the knob untill the indicators

point to desired character or blank. 5If the character prints UPSIDE

DOWN, turn the band until you can

read the characters correctly. The desired

character may be coated with ink.

3Set all bands and push the knob

in all the way.

INKING

1Move two latch buttons toward

label roll and swing top cover

away from print head.

2Fold a piece of scrap backing

paper. 3Insert folded backing paper

between ink roll and carrier.

Pull to snap old ink roll free.

4Cut off end of ink roll package.

Using package to protect fingers,

slide carrier into package and snap new ink roll

into carrier.

5Snap top cover closed.

Hang for easy reference.

Brake

Wheels

Label Exit

Operating

Lever

Label Exit

Loop

Plate

Hub

Backing

Paper

Discarded

Labels

Slot

Backing

Paper Exit

Knob

Indicator

Blank Print

Positions

Top Cover

Latch

Button

INKING

Cap

End

Carrier

OPERATION

1Squeeze and release operating lever. 2Place black rollers on item to

be labeled.

3Pull labeler to apply label.

(Gentle wiping motion.) DO NOT POUND labeler when

applying labels.

REMOVING SUPPLIES

1Tear label strip at label roll as

shown and pull label roll from

between hubs.

2Tear backing paper strip.

Pull label strip from labeler. 3Squeeze and release operating

lever until backing paper is free

to be pulled out.

MAINTENANCE

1With label roll removed, check

label track and backing paper

track for stray labels.

2Clear label track by squeezing

operating lever and feeding label

removal strip under brake wheels and out

front of labeler.

3To clear backing paper track:

a. Insert label removal strip in end of

track to loosen stray labels.

b. Insert label removal strip as

shown, using corner to remove stray

labels.

LUBRICATION PRINT ADJUSTMENT

If adhesive buildup occurs, lubricate as shown

with labels loaded. 1Print location is correct when extreme

right-hand and left-hand characters are located

as shown.

Monarch lubricant is recommended.

2Place small coin in feedwheel button slot.

3Push feedwheel button IN COMPLETELY

and turn slightly clockwise if print is too far left or

slightly counterclockwise if print is too far right.

Adjustment made without completely depressing button

are temporary.

4Repeat steps 2 and 3 until print is correctly

located.

TROUBLESHOOTING

Black

Rollers

Pull Strip

Tear Backing

Paper

Tear

Brake

Wheels

Front

Exit

Removal

Strip

End of

Track

OPERATION, REMOVING SUPPLIES & MAINTENANCE

Feedwheel

Button Slot

Approx. 1/16 inch (1.6 mm)

Lubricate:

One drop each spot on

backing paper (total of

four drops). Spread

with finger.

Lubricate:

One drop each side of label

chute between spring and

backing paper.

DO NOT OVER

LUBRICATE!

Visit www.paxar.com for sales, service, supplies, information, and telephone

numbers of our locations throughout the world.

TOLL FREE:

1-800-543-6650 (In the U.S.A.)

1-800-263-4650 (In Canada)

Trouble Remedy

Characters not printing.

Bands not inked.

Check ink roll per Inking

instructions.

Labels feed slowly or

hesitantly.

Follow Lubrication and

Maintenance Instructions.

Labels will not feed. Reload per instructions. Use

correct supplies.

Follow Maintenance instructions.

Print incorrectly located. Follow Print Adjustment

instructions.

Printing smeared or

distorted.

Print several labels (15 to 25) to

use up excess ink.

Printing too light. Squeeze operating lever harder

during operation.

Warranties

Product warranty statements may vary from country to

country. Please contact the authorized PAXAR/Monarch

representative in your country for details.

LUBRICATION, PRINT LOCATION, & TROUBLESHOOTING

Inhaltsverzeichnis

Andere Avery Dennison Etikettendrucker Handbücher

Avery Dennison

Avery Dennison ALX 92x Bedienungsanleitung

Avery Dennison

Avery Dennison Monarch FreshMarx 9417+ Solution Service-Handbuch

Avery Dennison

Avery Dennison AP5.4 Bedienungsanleitung

Avery Dennison

Avery Dennison ALS 330/430 Bedienungsanleitung

Avery Dennison

Avery Dennison Monarch 8417 Bedienungsanleitung

Avery Dennison

Avery Dennison AP5.4 Gen II Fehlerbehebungshandbuch

Avery Dennison

Avery Dennison SNAP 700 Bedienungsanleitung

Avery Dennison

Avery Dennison Monarch 1130 Series Bedienungsanleitung

Avery Dennison

Avery Dennison AP3.4 Bedienungsanleitung

Avery Dennison

Avery Dennison S 105 Bedienungsanleitung

Avery Dennison

Avery Dennison ALX 92x Bedienungsanleitung

Avery Dennison

Avery Dennison Monarch Freshmarx 9417+ Service-Handbuch

Avery Dennison

Avery Dennison SNAP 500 Bedienungsanleitung

Avery Dennison

Avery Dennison Label Printer Bedienungsanleitung

Avery Dennison

Avery Dennison 230 RH Leitfaden

Avery Dennison

Avery Dennison ALS 341 Bedienungsanleitung

Avery Dennison

Avery Dennison Pathfinder 6059 Bedienungsanleitung

Avery Dennison

Avery Dennison ALX 720 Bedienungsanleitung

Avery Dennison

Avery Dennison TTX 450 Fehlerbehebungshandbuch

Avery Dennison

Avery Dennison ALS 230 Bedienungsanleitung

Avery Dennison

Avery Dennison Monarch 1130 Bedienungsanleitung

Avery Dennison

Avery Dennison ALS 380 Bedienungsanleitung

Avery Dennison

Avery Dennison ALS 230 Bedienungsanleitung

Avery Dennison

Avery Dennison AP7.t Gebrauchsanweisung

Beliebte Etikettendrucker Handbücher anderer Marken

Brother

Brother P-Touch 2420PC Bedienungsanleitung

newell

newell Dymo LabelManager 210D Bedienungsanleitung

Brother

Brother TD-4000 Bedienungsanleitung

U-Line

U-Line BROTHER H-8754 Bedienungsanleitung

Tharo Systems

Tharo Systems H-435+ Bedienungsanleitung

Brother

Brother E300 Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

ID Technology

ID Technology 252 Bedienungsanleitung

Labelmate

Labelmate MC-11 Bedienungsanleitung

CAB

CAB XD4M/300 Bedienungsanleitung

Brother

Brother P-touch PT-9700PC Bedienungsanleitung

TSC

TSC PEX1000 Series Bedienungsanleitung

Adkins

Adkins Label Master Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Primera

Primera 510212 Bedienungsanleitung

Brady

Brady BradyPrinter S3100 Bedienungsanleitung

DuraLabel

DuraLabel LabPRO Bedienungsanleitung

Novexx Solutions

Novexx Solutions XLP 604 Bedienungsanleitung