AVGO NPF0Z Bedienungsanleitung
AVGO 1080p IP Wi-Fi Mini Outdoor Security Camera -
HOUSEHOLD USE ONLY
PRODUCT CODE: NPF0Z
Made In China
3. Add cameras to the network
Note: If it failed to add the camera by the ‘Scan QR code’,
please choose the method in the ‘Others’ to add the
camera.
①
Please power on the camera, and use network cable to
connect camera with the router LAN port,make sure the
router yellow indicator is flashing
②
Following below structure guides you how to connect
power supply and network cable to the router first.
3.1 Scan QR Code
There are two ways to connect an outdoor camera to a
mobile APP: “
Scan QR code”
and "
Others
" only. Both
ways can go to next page “Add Device”.
If no QR code can be found on the body of the device,
please choose the 'Others ' to add the camera.
①
Search in LAN
Click “
Search in LAN
”,you will hear the App says:
Please connect the network cable with camera and your
router, confirm the RJ45 port in yellow light is flashing.
Note: Make sure your network cable is connected with
camera and router before doing this step. And make sure
the phone and camera are under the same router.
Click on "Search in LAN", you can find all the
available
cameras in the same router with thesmart phone. If added
successfully, the camera can beadded via the same way by other
users(with differentaccount).（Note：Cameras that has been
addedsuccessfully in this account will not be searched
again).
After search camera UID succeed,click “Add it”.
The
binding page will pop up after about30
seconds,if it
does not pop up, then please return tothe Add camera
page, select the "Manually add"
method to add the
camera
Inhaltsverzeichnis
Andere AVGO Sicherheitskamera Handbücher
