Avigilon HD-NVR3-STD-24TB Bedienungsanleitung

Installation Guide

Avigilon™ HD Network Video Recorder

HD-NVR3-STD-24TB and HD-NVR3-STD-36TB

CENTER, ACC, and TRUSTED SECURITY SOLUTIONS are trademarks of Avigilon Corporation. Microsoft, and

Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or

other countries. Other names or logos mentioned herein may be the trademarks of their respective owners. The

absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of

ownership of the related trademark. Avigilon Corporation protects its innovations with patents issued in the

United States of America and other jurisdictions worldwide (see avigilon.com/patents). Unless stated explicitly

and in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other

intellectual property rights of Avigilon Corporation or its licensors.

The contents of this document and the specifications of the products discussed herein are subject to change

without notice. Avigilon Corporation reserves the right to make any such changes without notice. Neither

Avigilon Corporation nor any of its affiliated companies: (1) guarantees the completeness or accuracy of the

information contained in this document; or (2) is responsible for your use of, or reliance on, the information.

Avigilon Corporation shall not be responsible for any losses or damages (including consequential damages)

caused by reliance on the information presented herein.

Avigilon Corporation

avigilon.com

PDF-NVR3STD-B

Revision: 1 - EN

20171013

Table of Contents

Introduction 1

Overview 1

Front View 1

Back View 2

Installation 3

Package Contents 3

Installing the Rack Rails and Cable Management Arm 3

Connecting Cables 3

Configuring Windows 10 3

Installing the Bezel 4

Activate the Avigilon Control Center Software 4

Licensing the Avigilon Control Center (ACC) 6 Software 5

Automatic License Activation 5

Manual License Activation 5

Modifying Licenses 6

Downgrading to the Avigilon Control Center (ACC)5 Software 6

Networking 6

Configuring the Avigilon Control Center Software 7

Starting Up and Shutting Down the Avigilon Control Center Client Software 7

Starting Up the Client Software 7

Shutting Down the Client Software 7

Logging Into and Out of a Site 7

Logging In 8

Logging Out 8

Changing the Administrator Password 8

Connecting Cameras to the Avigilon Control Center Software 9

Setting the Recording Schedule 10

Creating a Recording Template 10

Setting Up a Weekly Recording Schedule 11

Setting Data Aging 11

Adding Users and Groups 12

Adding Groups 13

Adding Users 14

Advanced Settings 14

Advanced Features 16

iii

Checking System Health 16

Replacing a Hard Drive Blank 16

Replacing Front or Back Hard Drives 18

LED Indicators 20

Diagnostic Indicators 20

Power Status Indicators 20

Network Link Status Indicators 21

Hard Drive RAID Status Indicators 22

Specifications 23

Limited Warranty and Technical Support 25

Introduction

The Avigilon HD Network Video Recorder is preloaded with Avigilon Control Center™ software and is configured

for maximum performance and reliability. The HD Network Video Recorder can be easily integrated into any

existing Avigilon surveillance system, or act as the base of a new site.

Overview

Front View

1. Bezel

Protects against unauthorized physical access to the hard drives. The bezel must be removed to access

the front of the recorder.

2. Power button

Controls the power supply to the recorder.

3. Hard drives

Provides access to hot-swappable hard drives. There are LED indicators on each hard drive.

Some drives may contain an empty hard drive tray.

4. Video connector

Accepts a VGA monitor connection.

5. Diagnostic indicators

Provides information about system operations.

Introduction 1

For more information, see LED Indicators on page20.

6. Information tag

Provides the product service details, MAC addresses and a copy of the Windows license key.

Back View

1. Serial connector

Accepts connections to serial devices.

2. Video connector

Accepts a VGA monitor connection.

3. USB connectors

Accepts USB connections to external devices.

4. 1 Gigabit Ethernet ports

Accepts an Ethernet connection to multiple networks.

5. Power supply

Redundant power supply. Optional secondary power supply is available (HD-NVR3-STD-2NDPS).

6. SD card slot

Accepts an SD card.

7. Operating system hard drives

Two hot-swappable 2.5 inch hard drives that are loaded with the operating system.

Back View 2

Installation

Package Contents

Ensure the package contains the following:

lAvigilon HD Network Video Recorder

lRack sliding rail assembly kit

lCable management arm assembly kit

lBezel and key

lPower cable

lRecovery USB — contains Windows recovery software and supporting materials.

Installing the Rack Rails and Cable Management Arm

If the recorder will be kept in a server rack, install the Rack Sliding Rails and the Cable Management Arm

provided in the recorder package. Follow the procedures outlined in the Rack Installation Instructions and the

CMA Installation Instructions provided in the assembly kits.

NOTE: The supplied Rack Sliding Rails are compatible with square and round hole racks.

Connecting Cables

Refer to the diagrams in the Overview section for the location of the different connectors. Make any of the

following connections as required:

1. Connect a KVM switch or separate keyboard, mouse and monitor to the recorder.

lKeyboard and mouse can be connected to any USB port on the recorder.

lMonitor can be connected to any video connector at the front or back of the recorder.

2. Connect the recorder to your network using an Ethernet network cable.

3. Connect a power cable to the power supply at the back of the recorder.

4. Press the power button on the front of the recorder. Check that the recorder LED indicators display the

correct status.

Configuring Windows 10

After the recorder starts, you will need to configure the Windows operating system for the first time.

Installation 3

1. On the first screen, the MICROSOFT SOFTWARE LICENSE TERMS is displayed. Review the terms and

click Accept.

2. Select Join Local Active Directory.

Note: This prompt will only appear if an Active Directory is present on the network, see the Windows

Help and Support files for more information.

3. Enter a user name for accessing the Windows software.

4. Set a password for the user name you entered on the previous screen. When you are ready, click Next.

5. The Avigilon End User License Agreement is displayed, Review the terms and click Accept.

Proceed to activate the license for the Avigilon Control Center software on your HD Network Video Recorder.

Installing the Bezel

The bezel can be installed on the front of the recorder to help protect the power button and hard drives against

unauthorized access.

1. Slide the right end of the bezel against the right hinge of the recorder.

2. Push the left end of the bezel against the recorder until it clicks into place.

3. Use the provided key to lock the bezel.

Activate the Avigilon Control Center Software

Downgrading to the ACC™ 5 Software:

The HD Network Video Recorder is pre-installed with Avigilon Control Center (ACC)6 software. You can use the

ACC6 software or the ACC5 software. Do not activate the ACC6 software if you plan to use the ACC5

software, See Downgrading to the Avigilon Control Center (ACC)5 Software on page6.

Installing the Bezel 4

Before you can configure cameras and monitor live or recorded video, you will need to activate your ACC

software license. The license is provided with the recorder. You will need to purchase a license if you don't

already have one.

Other parts of the ACC system may start while you perform this procedure, but you will not be able to use any of

the features until after license activation is complete.

Licensing the Avigilon Control Center (ACC) 6 Software

The first time you connect to the new appliance with the ACC Client, you must activate a license for the new

ACC software. After the license is activated, you can immediately use the new licensed features.

1. Start and log in to the ACCClient. The "Select one or more sites to log in" prompt is displayed. If you are

connected only to the new recorder only one site is listed in the navigation panel to the left. The default

name is HDVA.

2. Double-click the new recorder name to log in. There is no user name or password set on the recorder.

3. At the top-left corner of the application window, click to open the New Task menu, then click .

4. In the site Setup tab, click .

5. In the License Management dialog box, click Add License….

6. In the following dialog box, select one of the following tabs:

lIf you have internet access, select the Automatic tab. Go to Automatic License Activation below.

lIf you do not have internet access, or you plan to keep the system in a private intranet, select the

Manual tab. Go to Manual License Activation below.

Automatic License Activation

On the Automatic tab:

1. At Enter Product Keys enter the license key.

2. Activate and License Site.

Manual License Activation

On the Manual tab:

1. At Enter Product Keys Step 1:, enter the license key.

2. At Generate Activation File click Save File… .

3. From the Save As window, choose where you want to save the .key file that is generated by the system.

You can rename the file as required.

4. Click Save.

5. Copy the .key file to a computer with internet access.

6. Open a web browser and go to http://activate.avigilon.com.

7. Browse to the location of the .key file then click Upload. The generated license file (.lic) should

download automatically. If it does not, allow the download to occur when you are prompted.

8. Copy the downloaded .lic file to a location that would be accessible to the ACC Client software.

9. Complete the product registration page to receive product updates from Avigilon, then click Register.

Licensing the Avigilon Control Center (ACC) 6 Software 5

10. Return to the ACC Client and at Apply License File click Apply….

11. Locate the downloaded .lic file and click Open.

12. When the Confirm Licenses dialog box is displayed, click OK.

Modifying Licenses

You can also use the the License Management dialog box to add, remove, deactivate, and reactivate licenses

for the ACC6 software. For more information, consult the online Help files.

Downgrading to the Avigilon Control Center (ACC)5 Software

1. Navigate to the Apps & Features section of Windows Settings and uninstall the ACC 6 software.

2. Navigate to the D: drive and delete the following directories:

D:\AvigilonConfig

D:\AvigilonData

3. Navigate to C:\Avigilon\Control Center Installation Files\5.10.

4. Install each application by double-clicking the installers in the following order:

ACC 5 Server

ACC 5 Client

ACC 5 Player

ACC 5 Gateway

5. To activate your license, refer to the Avigilon Control Center Server User Guide for the ACC 5 software,

available from http://avigilon.com.

Networking

By default, the HD Network Video Recorder acquires an IP address on the network through DHCP. If you need to

set up the recorder to use a static IP address or any specific network configuration, see the Windows Help and

Support files for more information.

Modifying Licenses 6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avigilon Netzwerk-Hardware Handbücher

Avigilon

Avigilon NVR5-10GBASET-A1 Bedienungsanleitung

Avigilon

Avigilon VMA-AIA1-CG1 Bedienungsanleitung

Avigilon

Avigilon 3 Series Bedienungsanleitung

Avigilon

Avigilon Premium NVR5 Series Bedienungsanleitung

Avigilon

Avigilon ENVR2 Plus Bedienungsanleitung

Avigilon

Avigilon NVR5 PRM FIPS Bedienungsanleitung

Avigilon

Avigilon AI NVR Bedienungsanleitung

Avigilon

Avigilon Premium NVR5 Series Bedienungsanleitung

Avigilon

Avigilon HD-NVRWS3-8TB Bedienungsanleitung

Avigilon

Avigilon Premium NVR5 Series Bedienungsanleitung

Avigilon

Avigilon AINVR-STD-PRK Bedienungsanleitung

Avigilon

Avigilon ACC VMA-RPA-RGD-8P2 Bedienungsanleitung

Avigilon

Avigilon ACC VMA-ENVR1-8P4 Bedienungsanleitung

Avigilon

Avigilon VMA-AIA1-CG1-UPGK Bedienungsanleitung

Avigilon

Avigilon NVR5-PRM-2NDCPU Bedienungsanleitung

Avigilon

Avigilon HD-NVR3-STD-36TB Bedienungsanleitung

Avigilon

Avigilon HD-NVR3-PRM-32TB Bedienungsanleitung

Avigilon

Avigilon VMA-RPO-4P4 Bedienungsanleitung

Avigilon

Avigilon Premium NVR5 Series Bedienungsanleitung

Avigilon

Avigilon HD NVR Series Bedienungsanleitung

Avigilon

Avigilon NVR4-VAL-6TB Bedienungsanleitung

Avigilon

Avigilon VMA-AS3X-IPMI Betriebsanleitung

Avigilon

Avigilon VMA-AS1-16P Bedienungsanleitung

Avigilon

Avigilon Premium NVR5 Series Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung