AVLink HX-331616 Bedienungsanleitung
Matrix Switching System—User Manual
0
User Manual
Matrix Switcher
16x16
HX-331616
V.2012HX-331616.00
Copyright and Trademarks:
All rights reserved by C&C TECHNIC TAIWAN CO., LTD. No part of this document may
be reproduced in any form or by any means without written permission from the product
manufacturer. Changes are periodically made to the information in this document.
They will be incorporated in subsequent editions. The product manufacturer may make
improvements and /or changes in the product described in this document at any time.
All the registered trademarks referred to this manual are belonging to their respective
companies.
Matrix Switcher Series—User Manual
1
Before You Begin
Follow all instructions marked on the device during using.
Do not attempt to maintain the device by yourself, any faults, please contact your
vendor.
Provide proper ventilation and air circulation and do not use near water.
It is better to keep it in a dry environment.
The system should be installed indoor only. Install either on a sturdy rack or desk in a
well-ventilated place.
Only use the power cord supported with the device.
Do not use liquid or aerosol cleaners to clean the device.
Always unplug the power to the device before cleaning.
Unplug the power cord during lightning or after a prolonged period of non-use to avoid
damage to the equipment.
Matrix Switcher Series—User Manual
2
Table of Contents
1. Matrix System Overview ............................................................................................................4
1.1 Introduction.......................................................................................................................4
1.2 Packing..............................................................................................................................5
1.3 Accessories (Optional) ......................................................................................................5
2. Features .......................................................................................................................................6
3. Specifications..............................................................................................................................7
4. Device Installation.......................................................................................................................8
5. Front/Rear Panels........................................................................................................................9
5.1 Front Panel ........................................................................................................................9
5.2 Rear Panel .......................................................................................................................11
6. Matrix Device and Peripherals Connection ..............................................................................13
6.1 Input/Output Connections...............................................................................................14
6.2 IR Pass-through Connection............................................................................................15
6.3 IR EXT Connection.........................................................................................................16
6.4 Power Connection...........................................................................................................16
6.5 Matrix Switcher Remote Control....................................................................................17
6.6 Ports and Switchers.........................................................................................................18
6.6.1 RS-232..................................................................................................................18
6.6.2 RS-485..................................................................................................................20
6.6.3 LAN Port..............................................................................................................22
6.6.4 DIP Switcher 8 Pins .............................................................................................23
6.6.5 DIP Switcher 2 Pins .............................................................................................23
6.6.6 Device ID Settings ...............................................................................................24
7. Matrix Application Software.....................................................................................................26
7.1 Software Introduction......................................................................................................26
7.1.1 Software Description............................................................................................26
7.1.2 Software Activation..............................................................................................26
7.1.3 Connect Matrix Switcher and PC.........................................................................27
7.2 Matrix Configuration.......................................................................................................27
7.2.1 Main Operation Interface.....................................................................................29
7.2.2 Disconnect Function Key.....................................................................................31
7.2.3 Audio Configuration Function .............................................................................33
7.2.4 EDID Configuration Function..............................................................................36
7.2.5 RS-232 Memory Function....................................................................................37
7.2.6 Options Function..................................................................................................38
7.2.7 Other Application.................................................................................................38
7.2.8 Communication Protocol/Control Command Code.............................................39
7.3 LAN Web Configuration.................................................................................................40
Matrix Switcher Series—User Manual
3
7.3.1 Audio Configuration.............................................................................................41
7.3.2 Video Configuration.............................................................................................42
7.3.3 Device Status Information....................................................................................43
7.3.4 Device Output View.............................................................................................43
7.3.5 LAN Main Operation...........................................................................................44
7.3.6 LAN Memory Function........................................................................................45
7.3.7 LAN IP Function..................................................................................................46
7.3.8 Other Application.................................................................................................47
8. Operation Examples..................................................................................................................48
9. Troubleshooting.........................................................................................................................52
Appendix AMatrix Switcher Remote Controller..........................................................................54
Appendix B IR Mini-Controller....................................................................................................55
Appendix C Firmware Upgrade....................................................................................................56
Appendix D RS-232 Communication Protocol.............................................................................59
D-1 Host Request..................................................................................................................59
D-1.1 Device Byte.........................................................................................................59
D-1.2 Request Byte.......................................................................................................60
D-1.3 Index Byte...........................................................................................................62
D-1.4 Value Byte...........................................................................................................63
D-1.5 CRC Byte............................................................................................................64
D-2 Device ACK Packet .......................................................................................................65
D-2.1 ACK Type A........................................................................................................65
D-2.2 ACK Type B........................................................................................................66
D-2.3 ACK Type C........................................................................................................67
D-2.4 ACK Type D........................................................................................................68
D-2.5 ACK Type E........................................................................................................70
Matrix Switching System—User Manual
4
1.Matrix System Overview
1.1 Introduction
HX-331616 Matrix Switcher is high performance HDMI switching equipment combining
with video and audio. It is used for input/output cross switching of multimedia signals.
Through 16 sets separated HDMI sources, you can also transmit multimedia input
separately to each multi-output equipment, thereby minimizing signal attenuation and
ensuring high definition, integrating high fidelity graphics and audio signal output.
Besides HX-331616 Matrix Switcher can through the extended accessory devices to
over long distances for transmitting data or detecting signal.
HX-331616 Matrix Switcher is used mainly in TV broadcasting projects, multimedia
conference halls, and large display performances, TV teaching and command control
centers. It boasts features of power interruption protection during power surge, LCD
display and synchronous and integrate audio/visual switching functions. HX-331616
supports 16 HDMI Type A for input and output connectors. Beside it also supports a
RS-232 or LAN communication port enables convenient communication with remote
control equipment to switch the multimedia signals.
Figure 1-1 HX-331616 Matrix Switcher
Matrix Switcher Series—User Manual
5
1.2 Packing
HDMI Matrix Switcher
RS-232 Communication Connected Cable
Power Cord
IR Receiver Cable
IR Blaster Cable
LAN Line
Female 1x5 Pole Captive Screw Socket * 2
Matrix Switcher Remote Controller
AAA Battery * 2
AV Matrix Software CD
User Manual
1.3 Accessories (Optional)
IR Mini-Controller
IR Receiver Cable
IR Blaster Cable
Matrix Switcher Series—User Manual
6
2.Features
Support up to 16 HDMI input/output interfaces
Mixed use HDMI cables for input and output connection
HDCP Compliant
EDID management (Copy from OUT port 1)
Centralized control upon 32 series connections via RS-485
Memory control can up to 8 sets
Support computer video up to 1920x1200
Support HDTV up to 1080p@60Hz, 12-bit
Support original 3D pass through
Support High Definition Audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD MA)
IR pass-through supports all IN and OUT ports
IR pass-through supports all kinds of IR frequency band
IR pass-through supports duplex transmission between IN and OUT ports
IR pass-through switch is based on HDMI switched by controller
Support IR remote control
Support IR Mini-Controller to select the input channel through Output configuration
Support RS-232 control
Support RS-485 serial control
Support Ethernet control
Internal universal power supply
3U rack
Matrix Switcher Series—User Manual
7
3.Specifications
Hardware
Input Connector 16 x HDMI Type A
Output Connector 16 x HDMI Type A
RS-232 Connector DB9 Female
LAN Connector RJ-45
RS-485 Connector 2
2 pins Dip Switcher 1
8 pins Dip Switcher 1
LCD Module 1
Power 100VAC~240VAC, 50/60Hz, internal
Housing Black Aluminum
Mounting Rack mountable (3U-rack-mount kits)
Weight 7.5kg
Dimensions (LxWxH) 336x482x130mm
(3U high, full rack wide without grips)
Multimedia
Max. Resolution 1080P@60Hz, 12-bit
Highest TMDS Frequency 225MHz
Control Information
HDMI Cable Distance At least 10 meter
Baud Rate 9600 bps; 8 data bits, 1 stop bit, no parity
Ethernet Protocol HTTP, DHCP, TCP/IP, ICMP (ping)
Program Control Web Server, AVM Application
Serial Control Port RS-232: 9Pin Female D Type Connector
RS-485: 1X5 Pole Captive Screw
Control Sequence Matrix
Remote Control Remote Controller, IR Receiver, IR Blaster
Web Server LAN, RJ-45
Matrix Switcher Series—User Manual
8
4.Device Installation
The Matrix Switcher has a black metallic housing. It can be placed on a sturdy desk
directly or installed on a 19-in bracket. See Figure 4-1 below:
Figure 4-1 Mount the Device on a Standard Bracket with 3U Rack-mount
Matrix Switcher Series—User Manual
9
5. Front/Rear Panels
5.1 Front Panel
Figure 5-1 HX-331616 Front Panel
HX-331616 supports up to 16 Output/Input switching keys on the Front Panel allowing
you to switch signal quickly. Also refer to 8.Operation Example about below descriptions.
OUT1~16 keys (output channel):Specify the Channel 1~Channel 16 for HDMI signal
output. These keys configure the status or access the settings; you can also use these
keys to switch output channels.
IN1~16 keys (input channel):Specify the Channel 1~Channel 16 for HDMI signal input.
Use these keys to switch the connected input channels or use them to instead of
number keys upon memory selections.
ALL: This key allows user to set single input channel to all output channels. The usage
of “ALL” key is the same as output key.
-Press the “ALL” key.
-Select the one of the IN 1~16 keys.
-The selected IN x key will transfer the input signal to all output channels.
-You can also press the “ALL” key and then press the “OFF” key to disable all
the displayed switching settings.
OFF: Disable the entire output channels. Press one of the OUT x keys that want to be
disabled for the output channel, then press the “OFF” key. Likewise, press the “ALL”
key and then press the “OFF” key to disable all the displayed switching settings. In
addition to switching port menu, press “OFF” key can return to the main screen during
implementing in other menu. You can also press “OFF” key to disable the light of LCD
screen for saving power.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere AVLink Matrix-Umschalter Handbücher
AVLink
AVLink HX-2344Z Bedienungsanleitung
AVLink
AVLink SX-2088 Bedienungsanleitung
AVLink
AVLink HX-1522W Bedienungsanleitung
AVLink
AVLink HX-2544 Bedienungsanleitung
AVLink
AVLink CX-2044 Bedienungsanleitung
AVLink
AVLink 128.850UK Bedienungsanleitung
AVLink
AVLink 128.849UK Bedienungsanleitung
AVLink
AVLink YX-1042 Bedienungsanleitung
AVLink
AVLink VX-2088 Bedienungsanleitung
AVLink
AVLink HX-2344 Bedienungsanleitung
