Avocent HMX Manager Bedienungsanleitung

The Power of BeingThere®

Quick Installation Guide

HMXManager

To Contact AvocentTechnical Support: Visit www.avocent.com

Avocent, the Avocentlogo,The Powerof BeingThere,and Emerge, are trademarks orregistered trademarks of Avocent Corporation orits afﬁliates. All othermarks are the property of their respective owners. © 2007AvocentCorporation. All rights reserved. 590-818-501A

Installing the HMX Manager

Install the HMXManager in a server rack or in

another appropriate location.

Connecting to your network

Connect one end of a CAT5 cable to LAN Port

1on the back panel of the HMXManagerand the

other to the LAN on which all managed units (IQs

and user stations) are connected.

NOTE: The HMXManagermay be connected to

two different networks using LAN Port 1 and LAN

Port 2 on the rear panel. LAN Port 1must be used

to connect to the network where the IQ and user

stations are connected. LAN Port 2 may be used

to connect to another network.The administrator

may gain web browser access to the HMX

Managerfrom a computerthat is connected to

networks on eitherof the LAN ports.

Connecting the power supply

Attach one end of the supplied power cord into

the back panel of the HMXManager and attach the

other end to an appropriate AC powersource.

WARNING: To reduce the risk of electric shock

or damage to your equipment:

- Do not disable the power cord grounding plug.

The grounding plug is an important safety

feature.

- Plug the power cord into a grounded (earthed)

outlet that is easily accessible at all times.

- Disconnect the power from the target device

by unplugging the power cord from either the

electrical outlet or the target device.

To install the HMX Manager

The following instructions will help you

install and use your HMX Manager.

Should you require further assistance, see

the HMX Manager Installer/User Guide.

Terminal or

Workstation

(for Conﬁguration)

Conﬁguring the IP address

To set an IPaddress to the HMXManager, you must

establish a connection to the serial menu.You can then

use the options on the serial console menu to conﬁgure

the network settings for each of the LAN Ports on the

HMXManager. For more information, see the HMX

Manager Installer/User Guide.You must use the serial port

to change the default IP settings on the HMXManager.

Accessing the Web Interface

Open Microsoft® Internet Explorerand in the Address

bar, type the URL for the HMX Manager. The address will

be in the format http://<<addr>>, where <<addr>> is

the IP address assigned to the HMX Manager.

For example, using the default settings on LAN Port

1, the address is http://10.0.0.10. The login screen

appears. Log in using the administrator credentials

(If this is the ﬁrst login to the HMX Manager, use the

default login (admin) and default password (password).

NOTE: If DNS is enabled, the address is the fully

qualiﬁed host name assigned to the HMXManager.

590-818-501A HMX Manager AIG.indd 1 11/7/07 5:10:22 PM

The Power of BeingThere®

Quick Installation Guide

HMXManager

To Contact AvocentTechnical Support: Visit www.avocent.com

Additional Information

USA Notiﬁcation

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note:This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Canadian Notiﬁcation

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Safety and EMC Approvals and Markings

FCC Class B, EN 55022 Class B, EN 61000-3-2/-3-3, CISPR 22 Class B, EN 55024/CISPR 24,

(EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,

EN 61000-4-11), EN 60950/IEC 60950-Compliant, ULListed (USA), CUL Listed (Canada),

TUVCertiﬁed (Germany), CE Marking (Europe)

The following instructions will help you

install and use your HMX Manager.

Should you require further assistance, see

the HMX Manager Installer/User Guide.

590-818-501A HMX Manager AIG.indd 2 11/7/07 5:10:24 PM

Andere Handbücher für HMX Manager

Inhaltsverzeichnis

Andere Avocent Netzwerk-Hardware Handbücher

Avocent

Avocent MergePoint 5240 Bedienungsanleitung

Avocent

Avocent EVR1500 EVR1500-AM EVR1500-AM Montage- und Wartungsanleitung

Avocent

Avocent CPS1600 Bedienungsanleitung

Avocent

Avocent MERGEPOINT SP MANAGER Montage- und Wartungsanleitung

Avocent

Avocent CCM Montage- und Wartungsanleitung

Avocent

Avocent Cyclades CS4008 Bedienungsanleitung

Avocent

Avocent MergePoint 5200 Bedienungsanleitung

Avocent

Avocent ACS 6000 Anleitung zur Verwendung

Avocent

Avocent MergePoint 5224 Bedienungsanleitung

Avocent

Avocent MERGEPOINT 53XX SP MANAGER Montage- und Wartungsanleitung

Avocent

Avocent MergePoint SP5324 Bedienungsanleitung

Avocent

Avocent SwitchView IP 1020 Bedienungsanleitung

Avocent

Avocent Cyclades ACS 5000 SERIES Betriebsanleitung

Avocent

Avocent MergePoint 5240 Bedienungsanleitung

Avocent

Avocent MergePoint 5200 Bedienungsanleitung

Avocent

Avocent MergePoint 5224 Bedienungsanleitung

Avocent

Avocent Advanced Console Server ACS 6000 Betriebsanleitung

Avocent

Avocent MergePoint 5200 Bedienungsanleitung

Avocent

Avocent Cyclades ACS 5000 SERIES Bedienungsanleitung

Avocent

Avocent MergePoint SP5300 Bedienungsanleitung

Avocent

Avocent SwitchView IP 1020 Montage- und Wartungsanleitung

Avocent

Avocent CPS1610 Montage- und Wartungsanleitung

Avocent

Avocent DSI5100 Bedienungsanleitung

Avocent

Avocent SwitchView IP 1020 Montage- und Wartungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung