Avocent PS/2 KVM Bedienungsanleitung

Single port PS2 KVM over IP

Single Port

PS/2 KVM over IP SWITCH

Preliminary

USER’S MANUAL

Rev 1.0

Single port PS2 KVM over IP

TABLE OF CONTENTS

1. THE QUICK INSTALLATION GUIDE

2. INTRODUCTION

2.1 When the sever is up and running

2.2 When the server is dead

2.3 FEATURES

2.4 PACKAGE CONTENTS

2.5 TECHNICAL SPECIFICATIONS

2.6 SYSTEM REQUIREMENT

2.7 CABLE DIAGRAMS

PRODUCT DETAILS

3. HARDWARE INSTALLATION

3.1 Operation overview

3.2 Connecting PS/2 KVM over IP to the host system

4. CONFIGURATION

4.1 Initial configuration

4.1.1 Initial configuration via DHCP server

4.1.2 Initial configuration via local console

4.1.3 Mouse, Keyboard and Video configuration

4.1.3.1 PS/2 KVM over IP switch mouse settings

4.1.3.2 Host system mouse settings

4.1.3.3 PS/2 KVM over IP switch Video Modes

5. USAGE

5.1 Prerequisites

5.2 Login into PS/2 KVM over IP switch and logout

5.2.1 Login into PS/2 KVM over IP switch

5.2.2 Main screen

5.2.3 Logout from PS/2 KVM over IP switch

5.3 Remote console

5.3.1 Show remove console

5.3.2 Description of Remote Console Options

5.3.3 PS/2 KVM over IP switch mouse synchronization

5.3.3.1 Introduction

5.3.3.2 Auto mouse speed and mouse synchronization

5.3.3.3 Limitations of the mouse synchronization

5.3.3.4 Single and Double Mouse Mode

5.3.4 Video setting through the remote console

5.3.4.1 Video Settings through the HTML-Frontend

5.3.4.2 Video Settings through the remote console

5.4 PC settings

5.4.1 SSL settings

5.4.1.1 SSL certificate management

5.4.2 Mouse/keyboard setting

5.4.3 Video setting

5.4.4 User specific settings

Single port PS2 KVM over IP

5.4.5 Remote console type

5.4.6 Mouse hotkey

5.4.7 Button keys

5.5 Network settings

5.5.1 Dynamic DNS

5.6 Serial settings

5.6.1 Modern setting

5.7 User settings

5.8 Maintenance

5.8.1 PS/2 KVM over IP switch board summary

5.8.2 Maintenance Features

5.8.2.1 Event log

5.8.2.1.1 Event log setting

5.8.2.1.2 Log event assignments

5.8.2.2 Date/Time setting

5.8.2.3 Update Firmware

5.8.3 Reset function

5.8.4 Reset PS/2 KVM over IP switch

5.9 Access via Telnet

6. TROUBLESHOOTING

7. PIN ASSIGMENTS

8. CERTIFICATES

Single port PS2 KVM over IP

1. The Quick Installation Guide

Installation

PS/2 KVM over IP switch redirects local keyboard, mouse and video data to a remote

administration console. All data is transmitted via IP. PS/2 KVM over IP switch can be used in a

multi administrator and multi server environment as well. Besides this, PS/2 KVM over IP switch

is a KVM switch, which can also be used with a local console.

PS/2 KVM over IP hardware installation

Host

Console

Figure 1.1 The connectors of single port PS/2 KVM over IP Front and rear side

Please perform the following steps:

1. Connect the power supply on PS/2 KVM over IP switch

2. Connect the monitor to the PS/2 KVM over IP switch console side.

3. Connect the keyboard to the PS/2 KVM over IP switch console side.

4. Connect the mouse to the PS/2 KVM over IP switch console side.

5. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and

the host port of the PS/2 KVM over IP switch.

6. Connect one purple end of 3-in-one cable to the PS/2 mouse port on the computer, and the

other end of 3-in-one cable to the host PS/2 mouse port on the PS/2 KVM over IP Switch.

7. Connect one green end of 3-in-one cable to PS/2 keyboard port on the computer, and the

other end of 3-in-one cable to the host PS/2 keyboard port on the PS/2 KVM over IP switch.

8. Connect Ethernet and/or modem, depending how you want to access PS/2 KVM over IP

switch

Video modes

PS/2 KVM OVER IP recognizes a limited number of common video modes. When running

X-Window on the host system, please don’t use any custom mode lines with special video

modes. If done so, PS/2 KVM OVER IP may not be able to detect these. You are on the safe side

with all standard VESA video modes. Please refer to Appendix A for a list of all known modes.

Initial IP configuration

Initially the PS/2 KVM over IP switch network interface is configured with the parameters shown

in Table 1.1.

Single port PS2 KVM over IP

Parameter Value

IP auto configuration DHCP

IP-Address —

Net-mask 255.255.255.0

Default-Gateway none

IP access control disabled

Table 1.1: Initial configuration

If this initial configuration doesn’t meet your local requirements, you need to do the initial IP

configuration. Use one of the following ways:

1. Connect the enclosed NULL modem cable to the serial interface on the rear side. The serial

interface needs to be adjusted with the parameters shown in table 1.2:

Parameter Value

Bits/second 115200

Data bits 8

Parity No

Stop bits 1

Flow Control None

Table 1.2: Serial parameters

Use a terminal software (e.g. hyper term or minicom) to connect to PS/2 KVM over IP switch.

Reset PS/2 KVM over IP switch and immediately press < ESC >. You will see some device

information and a ’=>’ prompt. Enter the command ’config’ and press < Enter >. After waiting a

few moments you may configure IP auto configuration, IP address, net mask and default

gateway. Pressing < Enter > without entering values does not change settings. The gateway

value must be set to 0.0.0.0 (for no gateway) or any other value. You will be asked if the

values are correct and get a chance to correct them. After confirming, PS/2 KVM over IP

switch performs a reset.

2. Use an crossover Ethernet cable to connect PS/2 KVM over IP switch to a subnet where a

DHCP server is available. After the DHCP server has assigned an IP address to PS/2 KVM over

IP switch you can use the web interface to configure the device.

Web interface

PS/2 KVM over IP switch may be accessed using a standard web browser. You may use the

HTTP protocol or a secure encrypted connection via HTTPS. Just enter the configured IP

address of PS/2 KVM over IP switch into your web browser. Initially there is only one user

configured who has unrestricted access to all PS/2 KVM over IP switch features:

Password

Please login and change the password immediately according to your own policies.

The Remote Console

The Remote Console is the redirected screen, keyboard and mouse of the remote host system to

which PS/2 KVM over IP switch is attached. The web browser which is used for accessing PS/2

KVM over IP switch has to supply a Java Runtime Environment version 1.1 or higher. The

Single port PS2 KVM over IP

Remote Console will behave exactly the same way as if you were sitting directly in front of the

screen of your remote system. That means keyboard and mouse can be used in the usual way.

Open the console by choosing the appropriate link in the navigation frame of the HTML fronted.

Figure 1.2 shows the top of the Remote Console.

Figure 1.2: Top part of the Remote Console

There are some options to choose from, the important ones are the following:

Auto Adjust button

If the video displayed is of bad quality or distorted in some way, press this button and wait

a few seconds while PS/2 KVM over IP switch tries to adjust itself for the best possible

video quality.

Sync Mouse

Choose this option in order to synchronize the local with the remote mouse cursor. This is

especially necessary when using accelerated mouse settings on the host system. In

general there is no need to change mouse settings on the host.

Video Settings in Options Menu This opens a new window with elements to control the PS/2

KVM over IP switch Video Settings. You can change some values, for instance related to

brightness and contrast of the picture displayed, which may improve the video quality. It is

also possible to revert to the default settings for all video modes or only the current one.

Single port PS2 KVM over IP

2. Introduction

Figure 2.1 Single port PS/2 KVM over IP

Thank you for purchasing PS/2 KVM over IP switch. PS/2 KVM over IP switch can save your

MONEY, TIME, SPACE, EQUIPMENT and POWER. PS/2 KVM over IP defines a new class of

remote KVM access devices. PS/2 KVM OVER IP defines a new class of remote KVM access

devices (see Figure 2.1). PS/2 KVM OVER IP combines digital remote KVM access via IP

networks with comprehensive and integrated system management.

PS/2 KVM over IP owes a convenient, remote KVM access and control via LAN or Internet. It

captures, digitizes, and compresses video and transmits it with keyboard and mouse signals to

and from a remote computer. PS/2 KVM over IP provides a non-intrusive solution for remote

access and control. Remote access and control software runs on its embedded processors only

but not on mission-critical servers, so that there is no interference with server operation or impact

on network performance.

Furthermore, PS/2 KVM over IP offers additional remote power management with the help of

optional available device.

PS/2 KVM over IP supports consoles consisting of PS/2 style keyboards, PS/2 style mouse and

HDDB 15 video output. PS/2 KVM over IP will automatically detect the current video mode of the

console, however manual fine tuning is recommended to receive the best video quality. PS/2

KVM over IP will accept video streams up to 110 MHz dot clock. This results in a screen

resolution of 1280x1024 dots with a frame rate of 60 Hz.

2.1 When the server is up and running

PS/2 KVM over IP switch gives you full control over the remote server. The Management

Console allows you to access the remote server’s graphics, keyboard and mouse and to send

special commands to the server. You can also perform periodic maintenance of the server.

Using the Console Redirection Service, you are able to do the following:

I. Reboot the system (a graceful shutdown).

II. Watch the boot process.

III. Boot the system from a separate partition to load the diagnostic environment.

IV. Run special diagnostic programs.

Single port PS2 KVM over IP

2.2 When the server is dead

Obviously, fixing hardware defects is not possible using a remote management device.

Nevertheless PS/2 KVM over IP gives the administrator valuable information about the type of a

hardware failure. Serious hardware failures can be categorized into five different categories with

different chances to happen:

I. Hard disk failure 50%

II. Power cable detached, power supply failure 28%

III. CPU, Controller, main board failure 10%

IV. CPU fan failure 8%

V. RAM failure 4%

Using PS/2 KVM over IP, administrators can determine which kind of serious hardware failure

has occurred (See table 2.1).

Type of failure Detected by

Hard disk failure Console screen, CMOS set-up information

Power cable detached, power supply failure Server remains in power on state after power on

command has been given.

CPU Controller, main board failure. Power supply is on, but there is no video output.

CPU fan failure By server specific management software

RAM failure Boot-Sequence on boot console

Table 2.1:Host system failures and how they are detected.

2.3 Features

 Manage serves around the world

 KVM (keyboard, video, mouse) access over IP, ISDN or analogous telephone line.

 BIOS level access

 SSL encryption

 No impact on server or network performance

 Automatically senses video resolution for best possible screen capture

 High-performance mouse tracking and synchronization

 Port to connect a user console for direct analogous access to KVM switch

 Local Mouse suppression (only when using SUN’s Java Virtual Machine)

 Remote power management and remote system management

 Can be use with any standard KVM

 Low Density CAT5 cable to eliminate cable clutter at the rack

Single port PS2 KVM over IP

2.4 Package contents

Base unit- Single port PS/2 KVM over IP Switch 1 PCS

User’s manual 1 PCS

Installation and User Manual on CD-ROM 1 PCS

AC to DC Power Adapter 1 PCS

Rack Mount Kit 1 SET

Null modem cable 1 PCS

2.5 Technical specifications

Model No. Single port PS/2 KVM over IP Switch

PC Port 1

Console Port 1

PC Port Connector

(All Female Type)

PS/2 Keyboard Mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15 pin

Console Port

Connector

(All Female Type)

Local Console: PS/2 Keyboard Mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15pin

Remote Console: RJ-45 8P8C

Serial Port(DB9 pin

Male)

LAN port(RJ-45 8P8C) 1

10BASE-T Ethernet uses Category 3/4/5/5E/6 UTP

100BASE-T Ethernet uses Category 5/5E/6 UTP

Reset port 1

Keyboard Emulation PS/2

Mouse Emulation PS/2

VGA Resolution 1280 X1024

Bandwidth 200MHz

Housing Metal

Power Adapter DC 5V, 2.5A

Operation Temperature 0~50℃

Storage Temperature -20 ~ 60℃

Humidity 0~80%, Non-Condensing

Size Desktop

Weight (kg) 1700g

Dimension (cm) 156 X139 X27

Single port PS2 KVM over IP

2.6 System requirement

Model No. Single port PS/2 KVM over IP Switch

Local console side One Keyboard, one Mouse and one

monitor

Remote Console

side

One PC is linked into the network

Computer side One PC or Server or the console port of

KVM switch unit

2.7 Cable diagrams

PS/2 Cable:

Mini Din 6 pin Male to Male

VGA Cable:

HDB15 pin Male to Male

AT to PS/2 keyboard adapter: (Optional)

Din 5 pin Male to Mini Din 6 pin Female

PS/2 to DB9 adapter (Optional)

Mini Din 6 pin Female to DB 9 pin Female

CAT5/5E/6 Straight Through UTP/STP Cable:

8P8C

Inhaltsverzeichnis

Andere Avocent Schalten Handbücher

Avocent

Avocent SwitchView SC120 Bedienungsanleitung

Avocent

Avocent DSR Series DSR1020 Bedienungsanleitung

Avocent

Avocent switchview 100 Bedienungsanleitung

Avocent

Avocent AutoView 2030 Bedienungsanleitung

Avocent

Avocent Cybex SwitchView SC8 DVI Bedienungsanleitung

Avocent

Avocent AutoView 1000R Montage- und Wartungsanleitung

Avocent

Avocent DSR Series DSR1020 Bedienungsanleitung

Avocent

Avocent DSR Series DSR2035 Bedienungsanleitung

Avocent

Avocent DSR Series DSR1021 Bedienungsanleitung

Avocent

Avocent DSR Series DSR2035 Bedienungsanleitung

Avocent

Avocent SwitchView Bedienungsanleitung

Avocent

Avocent DSR Series DSR2035 Bedienungsanleitung

Avocent

Avocent AMX5010 Bedienungsanleitung

Avocent

Avocent AMX5000 Bedienungsanleitung

Avocent

Avocent MPU1016DAC-001 Bedienungsanleitung

Avocent

Avocent SwitchView SC120 Bedienungsanleitung

Avocent

Avocent DSR SWITCH - Montage- und Wartungsanleitung

Avocent

Avocent AutoView 3050 Bedienungsanleitung

Avocent

Avocent 120 Bedienungsanleitung

Avocent

Avocent Single port KVM over IP switch Bedienungsanleitung

Avocent

Avocent ESP-2 MI Bedienungsanleitung

Avocent

Avocent MPU1016-001 Montage- und Wartungsanleitung

Avocent

Avocent SwitchView SC100 Bedienungsanleitung

Avocent

Avocent SWITCHVIEW PC Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung