Avonic AV-MT200 Bedienungsanleitung

USER MANUAL

Avonic Wall Mount

AV-MT200, AV-MT220

www.avonic.com • © July 2022 • Version 1.1

DISCLAIMER AND CONTACT

Disclaimer

All text, graphics, photographs, trademarks, logos, artwork and computer code (collectively, “Content”),

including but not limited to the design, structure, selection, coordination, expression, “look and feel” and

arrangement of such Content, contained in this Manual is owned, controlled or licensed by or to Avonic, and is

protected by trade dress, copyright, patent and trademark laws, and various other intellectual property rights and

unfair competition laws.

Except as expressly provided in these Terms of Use, no Content of this Manual may be copied, reproduced,

republished, uploaded, posted, publicly displayed, encoded, translated, transmitted or distributed in any way

(including “mirroring”) to any other computer, server, Website or other medium for publication or distribution or for

any commercial enterprise, without the prior written consent of Avonic.

The information contained in this Manual is subject to change without notice.

Contact Info

For any questions or suggestions, contact your reseller or local distributor of Avonic.

Visit the Avonic website www.avonic.com to find your local Avonic distributor or to download the most recent

version of the documentation.

Join Avonic on Social Media

www.Facebook.com/avonicPTZ www.instagram.com/avonicPTZ

www.LinkedIn.com/company/avonic www.youtube.com/channels/avonic

www.twitter.com/avonic

IMPORTANT INFORMATION

Liability

Avonic will NOT be held responsible for any damage or injury caused by unqualified persons carrying out these

tasks, or by not following the instructions in this Manual.

Intended Use and Non-Intended Use

Installation

The following applies to the installation of the mount and the camera:

• The installation activities described in this Manual should ONLY be executed by experienced

technicians.

• The installation activities should NOT be executed by minors, mentally disabled persons or other persons

not qualified to perform these tasks.

Operation

The following applies to the operation of the mount and the camera:

• The operational activities described in this Manual should ONLY be executed by people with enough

technical knowledge to perform the activities in a safe manner.

• This Product is specifically developed for video conferencing / streaming via internet by companies,

institutes and universities. It is NOT meant for private use in the residential area.

• This Product should ONLY be used indoors.

• This Product is NOT a medical device and should NOT be used as a substitute for professional medical

judgment. It is NOT designed or intended for use in the diagnosis of disease or other conditions, or in the

cure, mitigation, treatment, or prevention of any condition or disease. Please consult your healthcare

provider prior to making any decisions related to your health.

Important Precautions

This Product is NOT intended for use where failure of the device could lead to death, personal

injury, or severe environmental damage.

Failure to follow the SAFETY NOTES as described in this chapter could result in fire, electric

shock, injury, or damage to this Product or other property.

Power this Product ONLY with the included cable and power adapter. Other adapters

may not meet applicable safety standards, and could pose a risk of death or injury when

connected.

To prevent the risk of injury or damage to the Product or other property caused by a

potentially explosive atmosphere.

Be sure that you have COMPLETELY READ and UNDERSTOOD ALL information in this Manual

before unpacking, installing and using this Product. Keep the Manual in a safe place for

future reference or download it from www.avonic.com.

iii

Symbols Used in This Manual

Symbol Meaning Description

Danger Not following the instructions associated with this symbol may lead to

life-threatening situations and / or serious damage to the Product.

Warning Not following the instructions associated with this symbol may lead to

personal injury and / or serious damage to the Product.

Caution Caution should be exercised with the associated information.

Information The information associated with symbol refers to a general remark or

a reference to other documentation.

Instruction This symbol refers to one or more user instructions.

Recycling Specific parts of the Product can be re-used.

Acronyms

The following acronyms are used in this Manual:

PTZ Pan / Tilt / Zoom

SKU Stock Keeping Unit

UNC Unified National Coarse

Contents

DISCLAIMER AND CONTACT................................................................................................................ ii

IMPORTANT INFORMATION.................................................................................................................. iii

Liability......................................................................................................................................... iii

Intended Use and Non-Intended Use......................................................................................iii

Installation..........................................................................................................................iii

Operation.......................................................................................................................... iii

Important Precautions......................................................................................................iii

Symbols Used in This Manual....................................................................................................iv

Acronyms.................................................................................................................................... iv

INTRODUCTION......................................................................................................................................6

Purpose of This Manual..............................................................................................................6

Target Audience.........................................................................................................................6

Document Structure................................................................................................................... 6

SAFETY INSTRUCTIONS........................................................................................................................... 7

Important Precautions................................................................................................................7

Intended Use...............................................................................................................................7

Handling.............................................................................................................................7

Mounting............................................................................................................................7

Ventilation..........................................................................................................................8

Repair................................................................................................................................. 8

PRODUCT OVERVIEW........................................................................................................................... 9

Description...................................................................................................................................9

Features....................................................................................................................................... 9

UNPACKING.........................................................................................................................................10

Package Contents................................................................................................................... 10

Unpacking the Mount..............................................................................................................11

Return Procedure..................................................................................................................... 11

MOUNTING AND INSTALLATION.........................................................................................................12

Mounting on a Wall................................................................................................................. 12

1. Baseplate.....................................................................................................................12

2. Mounting the Camera...............................................................................................13

3. Cable Cover............................................................................................................... 14

4. Cover Cap.................................................................................................................. 14

Mounting on a mounting pole............................................................................................... 15

Trussmount clamp and mounting pole........................................................................ 15

MEASUREMENTS AND SPECS MT200..................................................................................................16

General Specifications.............................................................................................................17

MEASUREMENTS AND SPECS MT220..................................................................................................18

General Specifications.............................................................................................................19

TRANSPORT AND STORAGE............................................................................................................... 20

DISPOSAL AND RECYCLING...............................................................................................................21

INTRODUCTION

Purpose of This Manual

This Manual describes the safety precautions and the instructions for safe unpackaging, installation, operation,

maintenance and disposal of the Avonic MT200 and MT220 Wall Mount.

Note that this is ONE manual for both mounts and that the mounts are separately sold. In this Manual the

Avonic MT200 and MT200 Wall Mount is referred to as the 'Product'.

If you want to use the mount and camera in combination with the CamDirector, you need to make sure

that the MT200 is NOT compatible in combination with such a system! Use the MT220 to do this.

Target Audience

This Manual is developed for installation technicians who install the Product at client sites, and for IT professionals

who are responsible for operating the Product.

Document Structure

The Manual is subdivided into the following Chapters:

1. Introduction

2. Safety

3. Product Overview

4. Unpacking

5. Mounting and Installation

6. Measurements and Specs MT200

7. Measurements and Specs MT220

8. Transport and Storage

9. Disposal and Recycling

SAFETY INSTRUCTIONS

This chapter contains important safety information regarding the unpacking, installation and use of the mount

and the camera.

Important Precautions

This Product is NOT intended for use where failure of the device could lead to death, personal

injury, or severe environmental damage.

Failure to follow the SAFETY NOTES as described in this chapter could result in fire, electric

shock, injury, or damage to this Product or other property.

Power this Product ONLY with the included cable and power adapter. Other adapters

may not meet applicable safety standards, and could pose a risk of death or injury when

connected.

To prevent the risk of injury or damage to the Product or other property caused by a

potentially explosive atmosphere.

Be sure that you have COMPLETELY READ and UNDERSTOOD ALL information in this Manual

before unpacking, installing and using this Product. Keep the Manual in a safe place for

future reference or download it from www.avonic.com.

Intended Use

See section Intended Use and Non-Intended Use on page iii for details.

Handling

To prevent the risk of injury, take the following precautions when handling this Product:

• Handle the Product with care. It is made of metal and plastic components.

• The Product can be damaged if dropped, burned, punctured or crushed, or if it comes into contact

with liquid.

• Do not pick up and move the Product unit while a tripod is attached. The fitting may break under the

weight of the tripod, which may result in injury.

• If you suspect any damage to the Product, discontinue its use, as it may cause injury.

Mounting

To prevent the Product from falling down which may cause injuries:

• Mount this Product to a wall or mounting pole.

• ONLY use an Avonic mount for mounting to a wall or mounting pole.

• Ensure the mounting construction is capable of supporting four times the weight of the Product. (See

'General Specifications > Weight product’ in the Product Datasheet for the exact weight.)

• Use a safety loop or drop protection that prevents the Product from falling if the mounting construction

fails.

• During installation, NEVER install a Product above a person.

• Check the installation at least once a year. An improper mounting could cause the unit to fall off,

resulting in personal injury.

Ventilation

To prevent the risk of life-threatening injury or damage to the Product or other property, caused by electric

shock or fire hazard due to overheating of the camera mounted on the Product:

• Maintain adequate ventilation by NOT installing or placing the Product unit in a bookcase, built-in

cabinet or any other confined space.

• Ensure that curtains or any other material does NOT obstruct the ventilation.

Repair

Take the following precautions if the Product should be repaired:

• Don’t open this Product and don’t attempt to repair it yourself. Disassembling the Product may

damage it or may cause injury to you.

• If this Product is damaged, malfunctioning, or if it comes into contact with liquid, contact Avonic or an

Avonic Authorized Service Provider.

• Repairs by service providers other than Avonic or an Avonic Authorized Service Provider may not

involve the use of Avonic genuine parts and may affect the safety and functionality of the device. You

can find more information about repairs and service at www.avonic.com.

PRODUCT OVERVIEW

Description

The Avonic MT220 and MT200 Wall Mount are both solid wall mounts suitable for the support of one or two CM40

or CM70 series PTZ cameras. Its discrete design matches the silent operation of Avonic PTZ cameras. The wall

mount is a beautiful extension that not only ensures great and safe support of the PTZ cameras, but also allows

for all the cables to be hidden inside the mount. Accessories include a heavy-duty 30mm steel ring specifically

designed to mount the MT-220 and/or MT-200 on a truss clamp. For mobile applications the MT220 and MT200 can

be mounted in a flight case or installed on a tripod. Also available in black to match our black PTZ cameras.

Features

The Avonic MT220 and MT200 are having the following features:

Camera support

Supports one or two CM40 or CM70 camera's.

Separate base and plate

Separate base and camera plate for hassle free mounting and cable installation.

Hands free installation

Hands free installation of the camera, only one screw needed to secure it.

Integrated

Integrated cable cover.

Design

Discrete and compact design.

Seamless integration

Seamless integration with the shape and color of Avonic PTZ cameras.

Accessories

Heavyduty 30mm steel ring specifically designed to mount the MT200 and MT220 on a truss clamp.

UNPACKING

This describes the contents of a complete Product package, and instructions for safe unpacking and (if

necessary) Product return.

It is subdivided into the following sections:

1. Package Contents

2. Unpacking the Camera

3. Return Procedure

Package Contents

The following tables contains an overview of the package contents of the Product.

Take note that the mounts are separately sold! Check only the package contents for the mount you

have.

No. Quantity Description Avonic SKU

MT200 MT220

1 1 pc 1 pc Wall Mount AV-MT200-B/ -W

AV-MT220-B/ -W

2 1 pc 3 pc Black 30MM Cover Cap -

3 1 pc 1 pc 30MM Steel Ring for Truss Mount -

4 1 pc 2 pc 1/4”- UNC Pozidrive screw (20mm) to fasten

camera

5 2 pc 2 pc M6*10mm Allen Bolt screw -

6 5 pc 8 pc M3*6mm DIN9785 Pozidrive screws -

Each item is visualized below and referenced by the associated number in the table above:

Package Contents MT200 Package Contents MT220

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avonic Rack & Stand Handbücher

Avonic

Avonic AV-MT300 Bedienungsanleitung

Avonic

Avonic AV-MT250 Series Bedienungsanleitung

Avonic

Avonic AV-MT250 Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung