AVPro Edge AC-AMP-2024 Bedienungsanleitung
Digital/Analog Stereo Audio Amplifier
AC-amp-2024
Quick Start Guide
This Digital/Analog Stereo Audio Amplier is a compact, high performance,
Class-D amplier which features both digital and analog inputs. Volume and input
selection can be controlled via front panel buttons or RS-232. LED indicators
provide selection and feature information. This unit is designed for both the
commercial and residential user who needs to output a high quality source to
local analog speakers.
This quick start guide will be going
through:
• Installation
• Product breakdown
• Troubleshooting
Installation
1. PLug in the dc 24v power supply
included with the AC-amp-2024
2. Connect the audio source (Dvd player, cable box, gaming
console) via Optical digital audio input or stereo analog audio
input.
3. Connect to unpowered speakers via the blue left/right
speaker connections.
4. control the system settings with the front panel
front panel
LINE IN: Connect to the stereo analog output of a device such as a CD player or
PC.
OPT. IN: Connect to the optical audio output of a device suchas a media player
or game console using an appropriate optical cable.
RS-232: Connect directly to a PC, laptop or other serial control device with a
3-pin adapter cable to send RS-232 commands to control the unit.
RIGHT/LEFT OUT: Connect to unpowered speakers (20W, 4Ω) for stereo analog
audio output.
DC 24V: Plug the 24V DC power adapter into the unit and connect it to an AC
wall outlet for power.
MUTE Button: Press to toggle between muting and unmuting the audio output.
PW LED: This LED will illuminate bright green to indicate the unit is on and
receiving power. When the unit is in stand-by mode the LED will illuminate dim
green.
MUTE LED: This LED will illuminate to indicate the when the audio output is
muted.
SOURCE Button & OPT./LINE IN LEDs: Press this button to toggle between
the line in and optical inputs. The LEDs will illuminate to indicate which source
is currently selected.
VOL −/+ Buttons: Press or hold the −/+ (minus/plus) buttons to increase or
decrease the audio output volume.
VOLUME LEVEL LEDs: These 5 LEDs will illuminate progressively from left
(lowest) to right (highest) to indicate the current output volume level.
rear panel
Troubleshooting
• Verify Power- ENsure power is plugged in correctly
• Verify Connections- Check that all cables are properly connected
Have a question or need assistance?
Don’t hesitate to contact us!
SUPPORT: +1 605-274-6055
USA TOLL FREE: 877-886-5112
EMAIL: support@avproedge.com
Inhaltsverzeichnis
Andere AVPro Edge Verstärker Handbücher
AVPro Edge
AVPro Edge AC-FRESCO-DA116 Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA12-AUHD-GEN2 Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA12-AUHD-GEN2 Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA14-AUHD Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA14-AU Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA18-AUHD Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA210-HDBT Bedienungsanleitung
AVPro Edge
AVPro Edge ConferX AC-CX100-RAMP Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA18-AUHD-GEN2 Bedienungsanleitung
AVPro Edge
AVPro Edge AC-DA18-AUHD Bedienungsanleitung
