AWS TL-330 (330lb x 0.2lb) Bedienungsanleitung

American Weigh Scales

TL-330 (330lb x 0.2lb)

TL-440 (440lb x 0.5lb)

User Manual

TL-Series

TL-Series Manual

Thank you for purchasing the American Weigh

TL-Series hanging scale. Please read all operating

instructions carefully before use. Scales are precision

measuring devices and should always be handled with

proper care. To ensure years of reliable service, keep these

simple tips in mind:

• Do not exceed the scale’s maximum capacity.

• Store your scale in a clean, dry location. Dust, dirt,

and moisture can accumulate on the weighing

sensors and electronics causing inaccuracy or

malfunction.

• Avoid using your scale in close proximity to strong

radio wave emitting devices such as cordless phones.

• Suspend the scale from a stable point free from

vibration.

• Do not drop items onto the weighing hook. This may

cause damage to the load sensor.

• Avoid dropping your scale. The warranty does not

cover damage due to rough treatment or overload.

• Checkthebatteriesrstifyouarehavinganytrouble

with your scale. This simple step can remedy most

scale issues.

• Calibration is performed at the factory. Only

experienced users should perform calibration when

the scale requires it.

I. Part List

1. Scale

2. S-Hook and Shackle

3. AAA Batteries (x2)

II. Key Description

1. ON/OFF/TARE - Tap to turn the scale on or re-zero

the scale. Hold to turn the scale off.

2. UNIT Key - Tap to change the unit between LB, OZ,

or KG. Hold to change auto-off setting (see V).

3. HOLD Key - Tap to change the scale’s display hold

mode between Auto Hold, Peak Hold, and No Hold

(see VII).

III. Battery Installation

AAA

ON/OFF

TARE UNIT

HOLD

AAA

ON/OFF

TARE UNIT

HOLD

1. 3.

TL-Series Manual

1. Beforeusingthescaleforthersttime,check

the battery compartment and remove any plastic

insulation strips or packaging that may be in place to

prevent battery drainage during shipping/storage.

2. If you are replacing the batteries, make sure the

positive and negative contacts are properly aligned.

IV. Operation

1. Press the ON/OFF/TARE key to turn the scale on.

2. Wait for the display to display zero.

3. Hang the item to be weighed from the weighing

hook.

4. Observe the weight on the display.

5. To re-zero the scale, tap the ON/OFF/TARE key.

6. To turn the scale off, hold the ON/OFF/TARE key.

V. Auto-Off Setting

This scale has a selectable auto-off feature.

1. Press and hold the UNIT key to toggle the auto-off

setting on or off. A message will display on the

screen to indicate your selection:

AUTO: Auto-Off is Enabled. Scale will turn off

after 2 minutes of non-use.

OFF: Auto-Off is Disabled. Scale will remain on

until turned off manually.

VI. Changing the Unit of Measure

This scale can read in LB, OZ, or KG. To change the

weighing unit, follow these instructions:

1. Tap the UNIT key until the desired weighing unit is

indicated on the right side of the display.

• TL-330 & TL-440 Units: lb (pound) oz (ounce)

kg (kilogram)

VII. Hold Setting

You can change the scale’s hold setting between three

different modes: Auto Hold, Peak Hold, and No Hold. To

change the hold setting:

1. Tap the HOLD key. The display will show a letter at

the left side of the display to indicate the current hold

setting. These are:

A = Auto Hold - Weight is locked on the display

when stabilized.

P = Peak Hold - Highest weight is locked on

the display. Good for measuring forces.

N = No Hold - The weight does not lock on the

display.

VIII. Calibration

Calibration and adjustment are performed at the factory.

There is no need to calibrate unless you are experiencing

issues. Only advanced users should calibrate and adjust the

scale. To check calibration:

1. Place the required calibration weight on the scale

and note the displayed value.

2. If the displayed value is not within acceptable

tolerance (see chart on next page), adjustment is

required.

TL-Series Manual

Model Acceptable

Tolerance (±)

Calibration

Weight

Recommended

Accuracy Class

TL-330 0.3kg 100kg OIML M3

TL-440 0.6kg 100kg OIML M3

IX. Adjustment

1. With the scale OFF, press and hold the UNIT and

ON/OFF/TARE keys at the same time until a random

number shows on the LCD. If you wish to cancel,

press the HOLD key, otherwise, continue to step 2.

2. Make sure there is no weight on the hook then press

the ON/OFF/TARE key once more. The display will

ash“Zero”followedbytherequiredweightinKG

(100kg).

3. Place the required weight on the scale hook.

4. Waitbrieyfortheweighttostabilize,thenpressthe

ON/OFF/TAREkeyonelasttimetoconrm.

5. Thedisplaywillshow“PASS”.Calibrationis

complete.

X. Troubleshooting

• Problem: Scale will not turn on

• Solution: Check the batteries and ON/OFF lock

• Problem: Display will not stabilize

• Solution: Make sure the weight is stable on the

hook and not shaking or swinging

• Problem: Displayed weight is inaccurate

• Solution: Perform a calibration adjustment

XI. Error Codes

1. OUTZ - Zero range has shifted. Perform calibration

adjustment. If the problem persists, the load cell may

be permanently damaged due to overloading.

2. O_Ld - Maximum capacity exceeded. Remove the

extra weight to avoid damaging the load cell.

3. Lo - Low Power. Replace the batteries.

XII. Specications

TL-330 TL-440

Max. Capacity 150kg / 330lb /

5280oz

200kg / 440lb /

7040oz

Readability 0.1kg / 0.2lb / 1oz 0.2kg / 0.5lb / 2oz

Min. Capacity 0.3kg / 0.6lb / 3oz 0.6kg / 1.5lb / 6oz

Power 2 x AAA

Dimensions 6.0 x 2.8 x 1.2 in.

Hook Dimensions Gap: 0.7 in / Throat: 1.3 in

Warranty 10 Year Limited Warranty

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AWS Skala Handbücher

Beliebte Skala Handbücher anderer Marken

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung

Fidelity Electronics

Fidelity Electronics G2e Bedienungsanleitung