HALO –FVP Frame - Assembly Manual V1.1
Designs, Images and Content Copyright © Aeroxcraft Ltd. 2012 –2016
Page 2
Notes
It is the owner’s responsibility to ensure this model is assembled and fitted out correctly and
safely. Ensure that your model is capable of safely and reliably lifting the payload you are
asking it to. This model is dangerous if used in an incorrect manner. Ensure you seek
assistance from an experienced flyer if you are unsure. Do not fly near people, property or
highways. Do not fly over people, property or highways. There may be laws and regulations
governing the use of this model in your area, seek advice from your authorities if you are
unsure.
Planning your build and installation is key to building a safe and reliable multi rotor. Make sure
all wiring is of the correct gauge, properly connected, neat and protected from wear/tear and
radio/electrical interference. Make sure all the components you use are suitable for the size
and weight of your multi rotor.
Do not over tighten screws. Use of thread-lock is recommended.
Check this product for damaged hardware, loose joints, missing parts or sharp edges before
and after assembly and frequently during use. Do not use unless all components are correctly
fitted and adjusted. Do not use if any parts are missing, damaged or broken.
Assembly is required. Take care when unpacking and assembling; contains small parts and
sharp edges.
If you require any replacement parts they are all available from Aeroxcraft.
http://www.aeroxcraft.com/
Contact details
Email
Website
www.aeroxcraft.com
