AXCITY 60W Sound Pack Bedienungsanleitung
60W Sound Pack
Installation
AXCITY
ZAC des Hauts de Wissous
« Air Park de Paris »
Bâtiment le Cormoran
3 rue Jeanne Garnerin
91320 Wissous, France
ASBSOP0201-n°1
2012
Contents
60W Sound Pack Installation
Chapter 1
Pack Description
Box Contents.........................................................1-1
60W Amplifier.......................................................1-2
100V Speakers.......................................................1-3
Speaker Cable .......................................................1-4
Chapter 2
Pack Implementation
Step 1
Speakers Connection.............................................2-5
Step 2
AM/FM Antenna Connection.................................2-8
Step 3
Power Cord Connection.........................................2-9
Step 4
Amplifier Start-up................................................2-10
Chapter 3
Quick Troubleshooting
60W Pack.........................................................................3-12
Appendix A
Technical Data Sheets
Appendix B
Associated Documents
Pack Description 1-1
Chapter 1
Pack Description
Box Contents
The 60W Sound Pack contains the following: items
•1 60W amplifier with USB/CD/Tuner
•6 6W/100V speakers
•1 AM/FM antenna
•1 power cord
•100 meters of speaker cable
If any of these are incorrect, missing, or damaged,
contact your Axcity dealer. Keep the original box and
packing materials, in case the product needs to be sent
back for repair.
Pack Description 1-2
60W Amplifier
General Description
3-zone mixer amplifier equipped with an AM/FM tuner
and a CD MP3/USB player. The volume control covers all
areas. It can also be used at full power in single zone
mode. Its LCD screen provides the view of the radio
station or CD/USB title playing. Tuning radio stastion is
accomplished automatically using the scan function.
Pack Description 1-3
100V Speakers
General Description
6W/100V speaker. Wideband, it has an excellent audio
quality. Its small diameter provides a discrete
installation in the ceiling.
Pack Description 1-4
Speaker Cable
General Description
Flat loudspeaker cable dedicated to the 100 volt line.
Suitable for all types of sound systems, it can be used
both in fixed and mobile installations.
Pack Implementation 2-5
Chapter 2
Pack Implementation
Step 1: Connection of the speakers to the
amplifier
Beforehand, you must connect the speakers to speaker cables.
Then connect the speaker cable(s) to the amplifier.
General view of the rear of the amplifier
Start by stripping each conductors about 5 mm.
Pack Implementation 2-6
Fig.1
Unscrew the COM terminal on the right. Insert the black
conductors into the space between the connection plate
and the fixed terminal.
Screw up the COM terminal.
Pack Implementation 2-7
Insert the red conductors into the SP1 terminal,
corresponding to the 1st zone. The SP2 and SP3 terminals
correspond to zones 2 and 3.
Note:
-1 wired zone: 60W output power
-2 wired zones: 20W output power
-3 wired zones: 20W output power
Inhaltsverzeichnis
Andere AXCITY Verstärker Handbücher
