AXIOMTEK ICS-480V Bedienungsanleitung
i
ICS-480V
4U IndustrialWorkstation with 8.4” LCD
and 14 slots backplane
User’s Manual
ii
Disclaimers
The information in this manual has been carefully checked and is believed to
be accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any
infringements of patents or other rights of third parties which may result from
its use.
AXIOMTEK assumes no responsibility for any inaccuracies that may be
contained in this document. AXIOMTEK makes no commitment to update or
to keep current the information contained in this manual.
AXIOMTEK reserves the right to make improvements to this document and/
or product at any time and without notice.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopy-
ing, recording, or otherwise, without the prior written permission of
AXIOMTEK Co., Ltd.
Copyright 2004 by AXIOMTEK Co., Ltd.
All rights reserved.
July 2004, Version V1.0
Printed in Taiwan
iii
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
IBM is a registered trademark of International Business Machines
Corporation.
MS-DOS, Microsoft C and QuickBasic are trademarks of Microsoft
Corporation.
TURBO C is a trademark of Borland Inc.
BASIC is a trademark of Dartmouth College.
Intel is a trademark of Intel Corporation.
Other brand names and trademarks are the properties and registered
brands of their respective owners.
iv
ESD Precautions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
Do not remove boards or integrated circuits from their anti-static packaging
until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This helps to discharge any static
electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components.
What To Do If There Is A Problem
If there are damaged or missing parts, contact your supplier and/or dealer
immediately. Do not attempt to apply power to the board if there is damage
to any of its components.
v
Table of Contents
Chapter 1 Introduction............................................ 1
1.1 Introduction..................................................................... 1
1.2 General Specification ..................................................... 2
1.3 Passive Backplane Options........................................... 3
1.4 Power Supply Options ................................................... 3
1.5 Dimensions ..................................................................... 4
Chapter 2 System Setup ......................................... 5
2.1 System Installation ......................................................... 5
2.1.1 Removing the top cover .................................................... 5
2.1.2 Chassis Front and Rear Sections .................................... 6
2.1.3 Front Control ........................................................................
2.1.4 Drive Bay Installation ......................................................... 8
2.1.5 CPU card Installation.......................................................... 9
2.1.6 Cable connection for CPU card ...................................... 10
2.2 Cable Connection for A/D Board & Fan Power, Power
Switch, and Keyboard Control .................................... 10
2.3 Power Supply ................................................................. 12
2.4 Air Filter Replacement ................................................... 13
2.5 VGA Cable Installation ................................................... 14
Appendix A Safety Instructions............................. 17
B.1 Safety Instructions ....................................................... 17
vi
Introduction 1
ICS-480V4UIndustrialWorkstation with 8.4”LCD and 14slots
backplaneUser’s Manual
Chapter 1
Introduction
1.1 Introduction
4U Industrial workstation with 8.4" LCD & 14 slots
backplane. The ICS-480V is a 4U 14-slots Rackmount
Workstation with 8.4" LCD display and Front panel
function & data-entry keypad. This workstation is a
full-function and cost-effective designed Industrial
Automation Controller. The ICS-480V is available
with several combinations of the backplane and power
supply, which can apply to versatile applications.
The build-in VGA A/D board ensures the system
compatible with variety of Single Board Computers from
most of vendors. The front panel OSD controller allows
user to tune the LCD into the best position for any
environment. To enhance the system for easy
maintenance and upgrade, the two front USB ports,
12 function keypad & 65 data-entry keypad have been
build-in to the front panel. The air filter is located on
the external top-cover which minimizes the system down
time for air filter replacement. This ideal industrial-grade
workstation can be applied to the various of industrial
projects, such as transportation, factory automation,
environmental surveillance, and more.
2 Introduction
ICS-480V4UIndustrialWorkstation with 8.4”LCD and 14slots
backplaneUser’s Manual
1.2 General Specification
•Construction: Heavy duty steel chassis
•Drive bay: Shock-proof and front accessible 5.25"
by three drive bays.
•Cooling system: Single 86 CFM cooling fan with
top-accessible air filters
•Controls: Power switch (on-off or momentary),
reset switch, and keyboard lock behind lockable
door
•LED Indicator: Power and HDD LED for system
Power and Hard disk status LED for system power
status
•Connectors: Front accessible USB and PS/2 key-
board, rear panel 9-pin connector (9-pin connec-
tor are not include in the M/B version)
•Paint Color: Black
•Operating Temperature: 0° ~ +50°C (32°F ~
122°F)
•Storage Temperature: -50° ~ +60°C (-40°F ~
140°F)
•Relative Humidity: 10~95%@40°C, non-condens-
ing
•Vibration: 2G (Non-operation)/ 1G (Operation)
•Slide rails: General Device C-300 series supports
•Dimensions: 482.6(W) x 452(D) x 177(H)mm
(19"x17.8"x7")
•Weight: 17-21kg
•Safety: CE compliant for integrated system
Introduction 3
ICS-480V4UIndustrialWorkstation with 8.4”LCD and 14slots
backplaneUser’s Manual
1.3 Passive Backplane Options
•ATX6022/13L: 8 ISA/ 4 PCI/ 1 PICMG, single seg-
ment
•ATX6022/14: 9 ISA/ 4PCI/ 1 PICMG, single seg-
ment
•ATX6022/14G: 1 ISA/ 12 PCI/ 1 PICMG, single
segment
•ATX6020/14: 14 ISA, single segment
• For Manuals of above backplanes please refer to
http://www.axiomtek.com.tw/support.php
1.4 Power Supply Options
M ode l name
Specification
Watt Input Output M ini-load Safe ty M TBF
CWT-9300TC2
(AT) 300W 115/230Vac
(Selectable)
+5V@ 30A
+12V@10A
-12V@1A
-5V@1A
+5V@5A
+12V@2A
UL,cUL,C
SA,(UL60
950 2nd) CE
TUV, CB
100,000
hours@25°
full loa dSS
SS-300FS
(ATXw/ PFC) 300W 90/264Vac
(Fullra nge)
+5V@ 30A
+3.3V@28A
+12V@15A
+5Vsb@2A
+5V@2A
+12V@1A
UL,cUL,C
SA,CE
EN61000-3-3
Class
DTUV,PFC,-
CB
>50,000
hours@25°
(w/o FAN)
CWT-300
ATX12 (ATX) 300W 115/230Vac
(Selectable)
+5V@ 30A
+3.3V@14A
+12V@15A
+5VSB@2A
+5V@3A
+3.3V@0.5A
+12V@0.5A
+5VSB@0.2A
UL/TUV/CB
100,000
hours@25°
full road
SNP-425C DC48
(AT) 250W -40VDC~
-57VDC
+5V@ 30A
+12V@12A
-5V@ 2A
-12V@2A
+5V@1A UL/CSA/CE
4 Introduction
ICS-480V 4U Industrid Workstation with 8.4” LCD and 14 slots
backplane User’s Manual
1.5 Dimensions
Inhaltsverzeichnis
Andere AXIOMTEK Desktop Handbücher
AXIOMTEK
AXIOMTEK eBOX671-885-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT5153W-845 Bedienungsanleitung
AXIOMTEK
AXIOMTEK tBOX300-510-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK tBOX320-852-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT-3571T Bedienungsanleitung
AXIOMTEK
AXIOMTEK VTA-7570T Bedienungsanleitung
AXIOMTEK
AXIOMTEK EBOX640-500-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK tBOX324-894-FL-GND Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT812LR-832 Bedienungsanleitung
AXIOMTEK
AXIOMTEK mBOX100 Bedienungsanleitung
AXIOMTEK
AXIOMTEK eBOX800-511-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK eBOX560-880-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK eBOX620-831-FL-CAN Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK eBOX565-312-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK eBOX565-312-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT-5120TL Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT5120T-834 Bedienungsanleitung
AXIOMTEK
AXIOMTEK IPC964-512-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK tBOX500-510-FL Series Bedienungsanleitung
AXIOMTEK
AXIOMTEK tBOX311-820-FL Series Bedienungsanleitung
