AXIOMTEK P6121-V3 Bedienungsanleitung

P6121-V3

12.1” XGA TFT Monitor

User’s Manual

Disclaimers

This manual has been carefully checked and believed to contain accurate information.

Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third

party’s rights, and any liability arising from such use.

Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,

completeness or usefulness of any information in this document. Axiomtek does not make any

commitment to update the information in this manual.

Axiomtek reserves the right to change or revise this document and/or product at any time

without notice.

No part of this document may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,

without the prior written permission of Axiomtek Co., Ltd.

CAUTION

If you replace wrong batteries, it causes the danger of explosion. It is recommended by the

manufacturer that you follow the manufacturer’s instructions to only replace the same or

equivalent type of battery, and dispose of used ones.

September 2021, Version A1

Printed in Taiwan

iii

Safety Precautions

Before getting started, read the following important cautions.

1. Be sure to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and place all electronic components in any

static-shielded devices. Most electronic components are sensitive to static electrical

charge.

2. Disconnect the power cords from the P6121-V3 Series before making any installation. Be

sure both the system and the external devices are turned OFF. Sudden surge of power

could ruin sensitive components. Make sure the P6121-V3 Series is properly grounded.

3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only

a trained technician is allowed to do so. Integrated circuits on computer boards are

sensitive to static electricity. To avoid damaging chips from electrostatic discharge,

observe the following precautions:

◼Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help to discharge any static

electricity on your body.

◼When handling boards and components, wear a wrist-grounding strap, available

from most electronic component stores.

Trademarks Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd.

Windows®is a trademark of Microsoft Corporation.

IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.

Intel®and Pentium®are trademarks of Intel Corporation.

AMI is trademark of American Megatrend Inc.

Other brand names and trademarks are the properties and registered brands of their

respective owners.

iv 
 
Table of Contents 
 
 
Disclaimers.....................................................................................................ii 
Safety Precautions........................................................................................iii 
Chapter 1 Introduction............................................. 1 
1.1 General Description............................................................................1 
1.2 Features...............................................................................................2 
1.3 Specifications......................................................................................2 
1.4 Dimensions and Outlines ...................................................................3 
1.5 I/O Outlets............................................................................................4 
1.6 Packing List.........................................................................................5 
Chapter 2 System Setup .......................................... 7 
2.1 System Configuration.........................................................................7 
2.2 Panel Mounting ...................................................................................8 
2.3 Wall Mounting......................................................................................8 
2.4 VESA Mounting ...................................................................................9 
2.5 OSD Key Configuration ......................................................................9 
Appendix A Supported Input Timing Modes ............. 10 
Appendix B OSD Operation........................................ 12 
Function Description of OSD Menu............................................................12 
 
 

P6121-V3 User’s Manual

Introduction 1

Chapter 1

Introduction

This chapter contains general information and detailed specifications of the P6121-V3.

Chapter 1 includes the following sections:

⚫General Description

⚫Features

⚫Specifications

⚫Dimensions and Outlines

⚫I/O Outlets

⚫Package List

1.1 General Description

The P6121-V3, an industrial 12.1 inches view area LCD Monitor comes with slim, light and

reliable features to replace traditional bulky CRT for Industrial application. Its unique flat design

is fit for panel mounting, VESA mounting, Wall mounting and Rack mounting. The display

interface offers DP, HDMI and VGA for different input source from PC system or multimedia

system that let you upgrade the display don’t change anything from your system. Besides, for

varied HMI field, you can choose one of resistive touch or glass interface to meet your

application. In addition, this monitor has more comfort, safety, and environmental protection for

humanized & health consideration those would be the benefit that users can get.

This LCD monitor builds in color active matrix thin-film-transistor (TFT) liquid crystal display to

provide superior display performance. A maximum resolution of 1024x768 is ideal for

displaying complex graphics and high-definition images. Other outstanding designs that

enhance this LCD monitor’s performance are Plug & Play compatibility, and OSD (On Screen

Display) controls, especially OSD, it made you ease adjustment on screen image.

P6121-V3 User’s Manual

2 Introduction

1.2 Features

⚫High contrast color 12.1”XGA TFT LCD display support resolution up to 1024x768

⚫Flat design with NEMA4/IP65-compliant

⚫Suits with resistive touch or glass

⚫High Brightness and Ultra-wide viewing angle with anti-glare features.

⚫Power management system conforms to VESA DPMS standard

⚫Advanced OSD control for picture quality adjustment

⚫Supports VESA ARMs, Desktop Stand Rear, Panel, Wall mount

1.3 Specifications

⚫12.1” XGA(1024x768) LCD with LED backlight

⚫Resistive Touch or glass

⚫Front bezel design with NEMA4/IP65

⚫Control: OSD (On Screen Display) control pad on the side

⚫Mounting: Support Panel mount, VESA arm mount, Wall mount

⚫Net/Gross Weight

◼P6121-V3: 2.35 kg (5.18 lbs)/2.8 kg (6.17 lbs)

⚫Dimension (Main Body Size)

◼P6121-V3: 311.81 mm (12.28") (W) x 250.31 mm (9.85") (H) x 54.95 mm (2.16") (D)

⚫Operation Temperature

◼0℃to 50℃

⚫Relative Humidity

◼10% to 90% @ 40℃, Non-Condensing

⚫Power input

◼DC Version: Terminal block (24Vdc)

◼Max power consumption: 21W

NOTE: All specifications and images are subject to change without notice.

P6121-V3 User’s Manual

Introduction 3

1.4 Dimensions and Outlines

The following diagrams show the dimensions and outlines of P6121-V3

(AC Version by project)

P6121-V3 User’s Manual

4 Introduction

1.5 I/O Outlets

Please refer to the following illustration for I/O locations of the P6121-V3.

P6121-V3 User’s Manual

Introduction 5

1.6 Packing List

When you receive the P6121-V3, the bundled package should contain the following items:

⚫P6121-V3 unit x 1

⚫VGA cable x1

⚫USB cable cable x1 (for touch version only )

⚫Panel mount kit set x 1 (optional)

⚫HDMI cable x1 (optional)

⚫DP cable x1 (optional)

⚫Wall mount bracket x1 (optional)

If you can not find the package or any items are missing, please contact Axiomtek distributors

immediately.

P6121-V3 User’s Manual

6 Introduction

This page is intentionally left blank.

Inhaltsverzeichnis

Andere AXIOMTEK Monitor Handbücher

AXIOMTEK

AXIOMTEK P6191 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6191-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6157W-V2 Bedienungsanleitung

AXIOMTEK

AXIOMTEK DK1211C Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6105 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P624-C Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6157 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6217W Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6187W Bedienungsanleitung

AXIOMTEK

AXIOMTEK P712 Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL6100 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SDM510L Bedienungsanleitung

AXIOMTEK

AXIOMTEK P718O Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6187W-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK MMT175 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6217W-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6125 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6151-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6171-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL 6152-O/P Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3187W-881-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6103W-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6187W V2 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6157W-V3 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung