AXIOMTEK PANEL 6152-O/P Bedienungsanleitung

PANEL 6152-O/P

15” INDUSTRIAL TFT LCD MONITOR

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of

patents or other rights of third parties, which may result from its use.

AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in

this document. AXIOMTEK makes no commitment to update or to keep current the

information contained in this manual.

AXIOMTEK reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission ofAXIOMTEK Co.,

Ltd.





February 2003, Version A1

Printed in Taiwan

iii

Safety Approvals

CEMarking

FCCClassA

FCC Compliance

This equipment has been tested and complies with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.

Safety Precautions

Before getting started, read the following important cautions.

1. The P6152 does not come equipped with an operating

system. An operating system must be loaded first before

installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnect the power cord from the P6152 before

making any installation. Be sure both the system and the

external devices are turned OFF. Sudden surge of power

could ruin sensitive components. Make sure the P6152 is

properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The P6152 may come with or

w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the P6152, make sure it is

securely installed.

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on

your body.

When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

This

ThisThis

This page does not contain any information.

page does not contain any information.page does not contain any information.

page does not contain any information.

Table of Contents vii

Table of Contents

r 1

1 Introduction

IntroductionIntroduction

Introduction......................

............................................

......................1

1.1 General Description......................................... 1

1.2 Features........................................................... 2

1.3 Specifications.................................................. 2

1.4 Dimensions...................................................... 3

1.5 I/O Inputs......................................................... 5

r 2

2 System Setup

System SetupSystem Setup

System Setup.....................

..........................................

.....................7

2.1 System Configuration...................................... 7

2.2 Panel Mounting ............................................... 8

2.3 Wall Mounting (Option)...................................10

2.4 Rack Mounting (Option)..................................12

2.5 Desktop Stand (Option) ..................................13

x A

A Supported Input Timing

Supported Input TimingSupported Input Timing

Supported Input Timing

Modes

ModesModes

Modes ...........................

......................................................

...........................15

1515

x B

B OSD Operation

OSD OperationOSD Operation

OSD Operation ...............

..............................

...............17

1717

This page does not contain any information.

This page does not contain any information.This page does not contain any information.

This page does not contain any information.

P6152 Series Panel PC User’s Manual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and the detailed

specifications of the P6152-O/P. Chapter 1 includes the following

sections:

General Description

Features

System Specification

Dimensions

I/O Inputs

1.1 General Description

The Panel 6152, a industrial 15.1 inches view area LCD Monitor

comes with slim, light and reliable features to replace traditional bulky

CRT for Industrial application. Its unique front side design is fit for

open frame mounting (Panel6152-O) or panel mounting

(Panel6152-P). The display interface offers VGA-in standard

interfaces for different input source from PC system or multimedia

system that let you upgrade the display don’t change anything from

your system. Besides, for varied HMI field, you can choose one of

resistive, capacitive touch screen or glass interface to meet your

application. In addition, this monitor has more comfort, safety, and

environmental protection for humanized & health consideration those

would be the benefit that users can get.

This LCD monitor builds in 15.1” color active matrix thin-film-transistor

(TFT) liquid crystal display to provide superior display performance. A

maximum resolution of 1024x768 is ideal for displaying complex

graphics and high definition images. Other outstanding designs that

enhance this LCD monitor ’s performance are Plug & Play

compatibility, and OSD (On Screen Display) controls, especially OSD,

it made you ease adjustment on screen image.

P6152 Series Panel PC User’s Manual

Introduction

1.2 Features

High contrast color 15.1” XGA TFT LCD display support

resolution up to 1024x768

Stainless steel chassis with NEMA4/IP65-compliant and

Aluminum alloy front panel

Suits with resistive, capacitive or tempered

anti-reflection glass

Multi-scan function supports XGA, SVGA, VGA,

VGA-Text, PC-9801, MAC.

High Brightness and Ultra-wide viewing angle with

anti-glare features

Power management system conforms to VESA DPMS

standard

Advanced OSD control for picture quality adjustment

Supports VESA ARMS, Desktop Stand

Rear, Panel, Wall or Rack mounting

1.3 Specifications

Construction: Heavy-duty aluminum and steel chassis

Control: OSD (On Screen Display) control pad on front

side

Mounting: Panelmout, wallmount(optional). Supports

VESA arm mounting and Rackmount(optional)

Net weight: 5.2 Kgs

Dimension (main body size):

- P6152-P

418.0X310.0X47.0 mm

- P6152-O

385.4X293.4X41.6 mm

Operating Temperature Range: 0oC ~ 40oC

Relative Humidity: 20% ~ 90%; non-condensing

Inhaltsverzeichnis

Andere AXIOMTEK Monitor Handbücher

AXIOMTEK

AXIOMTEK P6121-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK DK1211C Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6151-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6157 Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL6100 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6157W-V2 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6125 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6191-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P712 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P718O Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6157W-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6217W Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6103W-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6187W-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK MMT175 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6151 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6217W-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SDM510L Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6105 Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6171-V3 Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT3187W-881-PCT Bedienungsanleitung

AXIOMTEK

AXIOMTEK P624-C Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6187W Bedienungsanleitung

AXIOMTEK

AXIOMTEK P6191 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung